/linux-4.4.14/drivers/staging/rtl8188eu/include/ |
H A D | odm_HWConfig.h | 25 /* CCK Rates, TxHT = 0 */ 31 /* OFDM Rates, TxHT = 0 */ 41 /* MCS Rates, TxHT = 1 */
|
H A D | hal_com.h | 106 /* CCK Rates, TxHT = 0 */ 112 /* OFDM Rates, TxHT = 0 */ 122 /* MCS Rates, TxHT = 1 */
|
/linux-4.4.14/drivers/staging/rtl8723au/include/ |
H A D | odm_HWConfig.h | 27 /* CCK Rates, TxHT = 0 */ 33 /* OFDM Rates, TxHT = 0 */ 43 /* MCS Rates, TxHT = 1 */
|
H A D | hal_com.h | 75 /* CCK Rates, TxHT = 0 */ 81 /* OFDM Rates, TxHT = 0 */ 91 /* MCS Rates, TxHT = 1 */
|
/linux-4.4.14/sound/usb/ |
H A D | proc.c | 98 snd_iprintf(buffer, " Rates: %d - %d (continuous)\n", proc_dump_substream_formats() 102 snd_iprintf(buffer, " Rates: "); proc_dump_substream_formats()
|
/linux-4.4.14/drivers/net/wireless/realtek/rtl8xxxu/ |
H A D | rtl8xxxu.h | 214 /* CCK Rates, TxHT = 0 */ 220 /* OFDM Rates, TxHT = 0 */ 230 /* MCS Rates, TxHT = 1 */
|
/linux-4.4.14/drivers/mfd/ |
H A D | wm8997-tables.c | 337 { 0x000005E5, 0x0000 }, /* R1509 - SLIMbus Rates 1 */ 338 { 0x000005E6, 0x0000 }, /* R1510 - SLIMbus Rates 2 */ 339 { 0x000005E7, 0x0000 }, /* R1511 - SLIMbus Rates 3 */ 340 { 0x000005E8, 0x0000 }, /* R1512 - SLIMbus Rates 4 */ 341 { 0x000005E9, 0x0000 }, /* R1513 - SLIMbus Rates 5 */ 342 { 0x000005EA, 0x0000 }, /* R1514 - SLIMbus Rates 6 */ 343 { 0x000005EB, 0x0000 }, /* R1515 - SLIMbus Rates 7 */ 344 { 0x000005EC, 0x0000 }, /* R1516 - SLIMbus Rates 8 */
|
H A D | wm5102-tables.c | 470 { 0x000005E5, 0x0000 }, /* R1509 - SLIMbus Rates 1 */ 471 { 0x000005E6, 0x0000 }, /* R1510 - SLIMbus Rates 2 */ 472 { 0x000005E7, 0x0000 }, /* R1511 - SLIMbus Rates 3 */ 473 { 0x000005E8, 0x0000 }, /* R1512 - SLIMbus Rates 4 */ 474 { 0x000005E9, 0x0000 }, /* R1513 - SLIMbus Rates 5 */ 475 { 0x000005EA, 0x0000 }, /* R1514 - SLIMbus Rates 6 */ 476 { 0x000005EB, 0x0000 }, /* R1515 - SLIMbus Rates 7 */ 477 { 0x000005EC, 0x0000 }, /* R1516 - SLIMbus Rates 8 */
|
H A D | wm5110-tables.c | 935 { 0x000005E5, 0x0000 }, /* R1509 - SLIMbus Rates 1 */ 936 { 0x000005E6, 0x0000 }, /* R1510 - SLIMbus Rates 2 */ 937 { 0x000005E7, 0x0000 }, /* R1511 - SLIMbus Rates 3 */ 938 { 0x000005E8, 0x0000 }, /* R1512 - SLIMbus Rates 4 */ 939 { 0x000005E9, 0x0000 }, /* R1513 - SLIMbus Rates 5 */ 940 { 0x000005EA, 0x0000 }, /* R1514 - SLIMbus Rates 6 */ 941 { 0x000005EB, 0x0000 }, /* R1515 - SLIMbus Rates 7 */ 942 { 0x000005EC, 0x0000 }, /* R1516 - SLIMbus Rates 8 */
|
H A D | wm8998-tables.c | 397 { 0x000005E5, 0x0000 }, /* R1509 - SLIMbus Rates 1 */ 398 { 0x000005E6, 0x0000 }, /* R1510 - SLIMbus Rates 2 */ 399 { 0x000005E9, 0x0000 }, /* R1513 - SLIMbus Rates 5 */ 400 { 0x000005EA, 0x0000 }, /* R1514 - SLIMbus Rates 6 */ 401 { 0x000005EB, 0x0000 }, /* R1515 - SLIMbus Rates 7 */
|
/linux-4.4.14/drivers/staging/wilc1000/ |
H A D | coreconfigurator.c | 71 ISUPRATES = 1, /* Supported Rates */ 99 IEXSUPRATES = 50, /* Extended Supported Rates */
|
H A D | host_interface.h | 727 | Capability Information | Listen Interval | SSID | Supported Rates |
|
/linux-4.4.14/drivers/scsi/mpt3sas/mpi/ |
H A D | mpi2_raid.h | 139 MPI2_RAID_ACTION_RATE_DATA Rates; member in union:_MPI2_RAID_ACTION_DATA
|
/linux-4.4.14/drivers/net/wireless/brcm80211/brcmsmac/ |
H A D | rate.h | 212 /* Rates specified in brcms_c_rateset_filter() */
|
H A D | channel.c | 235 /* CCK Rates */ brcms_c_channel_min_txpower_limits_with_local_constraint()
|
H A D | main.c | 3435 /* incoming rates are in 500kbps units as in 802.11 Supported Rates */ brcms_c_rate_lookup_init()
|
/linux-4.4.14/drivers/net/wireless/hostap/ |
H A D | hostap_ap.h | 29 /* Maximum size of Supported Rates info element. IEEE 802.11 has a limit of 8,
|
/linux-4.4.14/drivers/net/wireless/ath/wcn36xx/ |
H A D | wcn36xx.h | 176 /* Rates */
|
H A D | hal.h | 1155 /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be 1159 /* Titan and Taurus Rates */
|
/linux-4.4.14/arch/blackfin/mach-bf518/include/mach/ |
H A D | anomaly.h | 33 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
|
/linux-4.4.14/sound/ppc/ |
H A D | awacs.h | 183 /* Various Rates */
|
/linux-4.4.14/drivers/net/wireless/mwifiex/ |
H A D | join.c | 372 * - Rates TLV 454 /* Setup the Rates TLV in the association command */ mwifiex_cmd_802_11_associate() 1171 /* Copy Data Rates from the Rates recorded in scan response */ mwifiex_cmd_802_11_ad_hoc_join()
|
H A D | scan.c | 571 "info: SCAN_CMD: Rates size = %d\n", mwifiex_append_rate_tlv()
|
H A D | cfg80211.c | 2261 * Rates below 6 Mbps in the table are CCK mwifiex_set_ibss_params()
|
/linux-4.4.14/drivers/net/wireless/cw1200/ |
H A D | debug.c | 181 seq_printf(seq, "Rates: 0x%.8X\n", cw1200_status_show()
|
H A D | sta.c | 1977 pr_debug("[STA] Preamble: %d, Greenfield: %d, Aid: %d, Rates: 0x%.8X, Basic: 0x%.8X\n", cw1200_bss_info_changed()
|
/linux-4.4.14/include/net/nfc/ |
H A D | nci.h | 107 /* NCI Bit Rates */
|
/linux-4.4.14/arch/blackfin/mach-bf537/include/mach/ |
H A D | anomaly.h | 78 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
|
/linux-4.4.14/sound/pci/ca0106/ |
H A D | ca0106_proc.c | 23 * Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".)
|
H A D | ca0106_mixer.c | 23 * Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".)
|
H A D | ca0106.h | 23 * Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".)
|
H A D | ca0106_main.c | 49 * Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".)
|
/linux-4.4.14/sound/soc/codecs/ |
H A D | wm8903.h | 289 * R20 (0x14) - Clock Rates 0 297 * R21 (0x15) - Clock Rates 1 310 * R22 (0x16) - Clock Rates 2
|
H A D | wm8904.h | 277 * R20 (0x14) - Clock Rates 0 297 * R21 (0x15) - Clock Rates 1 307 * R22 (0x16) - Clock Rates 2
|
H A D | wm8903.c | 56 { 20, 0x0400 }, /* R20 - Clock Rates 0 */ 57 { 21, 0x0D07 }, /* R21 - Clock Rates 1 */ 58 { 22, 0x0000 }, /* R22 - Clock Rates 2 */
|
H A D | wm8904.c | 105 { 20, 0x945E }, /* R20 - Clock Rates 0 */ 106 { 21, 0x0C05 }, /* R21 - Clock Rates 1 */ 107 { 22, 0x0006 }, /* R22 - Clock Rates 2 */
|
H A D | isabelle.c | 1012 /* Rates supported by Isabelle driver */
|
/linux-4.4.14/drivers/usb/serial/ |
H A D | ftdi_sio.h | 118 * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
|
H A D | mos7840.c | 102 /* For higher baud Rates use TIOCEXBAUD */
|
/linux-4.4.14/drivers/staging/wlan-ng/ |
H A D | p80211mgmt.h | 234 /*-- Supported Rates -----------------------------*/
|
/linux-4.4.14/arch/blackfin/mach-bf548/include/mach/ |
H A D | anomaly.h | 34 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
|
/linux-4.4.14/include/linux/rtc/ |
H A D | ds1685.h | 297 * Periodic Interrupt Rates / Square-Wave Output Frequency
|
/linux-4.4.14/arch/blackfin/mach-bf527/include/mach/ |
H A D | anomaly.h | 50 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
|
/linux-4.4.14/sound/pci/emu10k1/ |
H A D | p16v.h | 8 * Rates: 44.1, 48, 96, 192.
|
H A D | p16v.c | 8 * Rates: 44.1, 48, 96, 192.
|
/linux-4.4.14/drivers/net/wireless/rt2x00/ |
H A D | rt2x00dev.c | 974 * Rates: CCK, OFDM. rt2x00lib_probe_hw_modes() 990 * Rates: OFDM. rt2x00lib_probe_hw_modes()
|
/linux-4.4.14/drivers/staging/rtl8192e/ |
H A D | rtllib_wx.c | 130 p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): "); rtl819x_translate_scan()
|
/linux-4.4.14/drivers/staging/rtl8192u/ieee80211/ |
H A D | ieee80211_wx.c | 127 p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): "); rtl819x_translate_scan()
|
/linux-4.4.14/drivers/net/ieee802154/ |
H A D | atusb.c | 695 * http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf atusb_probe()
|
/linux-4.4.14/drivers/net/wireless/ath/ath5k/ |
H A D | desc.c | 392 * Rates can be 0 as long as the retry count is 0 too. ath5k_hw_setup_mrr_tx_desc()
|
/linux-4.4.14/arch/blackfin/mach-bf561/include/mach/ |
H A D | anomaly.h | 148 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
|
/linux-4.4.14/arch/blackfin/mach-bf533/include/mach/ |
H A D | anomaly.h | 136 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
|
/linux-4.4.14/drivers/tty/serial/ |
H A D | omap-serial.c | 251 * Original table in OMAP TRM named "UART Mode Baud Rates, Divisor Values, 252 * and Error Rates" determines modes not for all common baud rates.
|
/linux-4.4.14/drivers/net/wireless/libertas/ |
H A D | cfg.c | 278 lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max); add_ie_rates() 1161 lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp); lbs_associate()
|
/linux-4.4.14/include/uapi/linux/ |
H A D | wireless.h | 534 #define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ 1013 /* Rates */
|
/linux-4.4.14/drivers/net/wireless/realtek/rtlwifi/ |
H A D | wifi.h | 736 /*CCK Rates, TxHT = 0 */ 742 /*OFDM Rates, TxHT = 0 */
|
/linux-4.4.14/include/linux/mfd/arizona/ |
H A D | registers.h | 4586 * R1509 (0x5E5) - SLIMbus Rates 1 4596 * R1510 (0x5E6) - SLIMbus Rates 2 4606 * R1511 (0x5E7) - SLIMbus Rates 3 4616 * R1512 (0x5E8) - SLIMbus Rates 4 4626 * R1513 (0x5E9) - SLIMbus Rates 5 4636 * R1514 (0x5EA) - SLIMbus Rates 6 4646 * R1515 (0x5EB) - SLIMbus Rates 7 4656 * R1516 (0x5EC) - SLIMbus Rates 8
|
/linux-4.4.14/drivers/misc/ |
H A D | vmw_balloon.c | 63 * Rates of memory allocaton when guest experiences memory pressure
|
/linux-4.4.14/drivers/net/wireless/ti/wlcore/ |
H A D | conf.h | 447 * Rates supported for data packets when operating as STA/AP. Note the absence
|
/linux-4.4.14/sound/pci/pcxhr/ |
H A D | pcxhr_mixer.c | 848 .name = "Clock Rates",
|
/linux-4.4.14/drivers/net/wireless/iwlwifi/mvm/ |
H A D | debugfs.c | 821 pos += scnprintf(pos, endpos - pos, "Last Rates\n"); iwl_dbgfs_frame_stats_read()
|
/linux-4.4.14/net/mac80211/ |
H A D | ibss.c | 62 2 + 8 /* max Supported Rates */ + ieee80211_ibss_build_presp()
|
/linux-4.4.14/drivers/rtc/ |
H A D | rtc-ds1685.c | 750 * Periodic Interrupt Rates.
|
/linux-4.4.14/include/linux/ |
H A D | ieee80211.h | 1004 /* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */
|
/linux-4.4.14/drivers/staging/rtl8188eu/os_dep/ |
H A D | ioctl_linux.c | 213 p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): "); translate_scan()
|
/linux-4.4.14/drivers/usb/core/ |
H A D | message.c | 488 * Data Transfer Rates:
|
/linux-4.4.14/sound/sparc/ |
H A D | dbri.c | 14 * - DBRI: AT&T T5900FX Dual Basic Rates ISDN Interface. It is a 32 channel
|
/linux-4.4.14/drivers/staging/rtl8723au/core/ |
H A D | rtw_mlme_ext.c | 805 * Rates (ESR) IE. Try to fix the IE length to avoid OnBeacon23a()
|
/linux-4.4.14/drivers/net/wireless/ath/ath10k/ |
H A D | mac.c | 36 /* Rates */
|
/linux-4.4.14/drivers/net/wireless/ |
H A D | airo.c | 214 can only be set in setup_card. Rates should be a comma separated
|