Searched refs:C2 (Results 1 - 86 of 86) sorted by relevance

/linux-4.4.14/include/linux/
H A Dc2port.h2 * Silicon Labs C2 port Linux support
19 * C2 port basic structs
46 /* Enable or disable the access to C2 port */
/linux-4.4.14/drivers/misc/c2port/
H A Dcore.c2 * Silicon Labs C2 port core Linux support
40 * C2 registers & commands defines
43 /* C2 registers */
49 /* C2 interface commands */
56 /* C2 status return codes */
62 * C2 port low level signal managements
86 * interructions since C2 port specification says that it must be c2port_strobe_ck()
100 * C2 port basic functions
409 /* Select DEVICEID register for C2 data register accesses */ __c2port_show_dev_id()
446 /* Select REVID register for C2 data register accesses */ __c2port_show_rev_id()
501 /* Target the C2 flash programming control register for C2 data __c2port_store_flash_access()
505 /* Write the first keycode to enable C2 Flash programming */ __c2port_store_flash_access()
510 /* Write the second keycode to enable C2 Flash programming */ __c2port_store_flash_access()
516 * C2 flash programming */ __c2port_store_flash_access()
554 /* Target the C2 flash programming data register for C2 data register __c2port_write_flash_erase()
648 /* Target the C2 flash programming data register for C2 data register __c2port_read_flash_data()
759 /* Target the C2 flash programming data register for C2 data register __c2port_write_flash_data()
939 /* By default C2 port access is off */ c2port_device_register()
943 dev_info(c2dev->dev, "C2 port %s added\n", name); c2port_device_register()
968 dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name); c2port_device_unregister()
986 printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION c2port_init()
1008 MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION);
H A Dc2port-duramar2150.c2 * Silicon Labs C2 port Linux support for Eurotech Duramar 2150
29 * C2 port operations
158 MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150");
/linux-4.4.14/drivers/media/usb/pvrusb2/
H A Dpvrusb2-std.h27 // false. String is expected to be of the form: C1-x/y;C2-a/b where C1 and
28 // C2 are color system names (e.g. "PAL", "NTSC") and x, y, a, and b are
/linux-4.4.14/net/bridge/
H A Dbr_input.c258 * Bridge Group Address 01-80-C2-00-00-00 br_handle_frame()
259 * (MAC Control) 802.3 01-80-C2-00-00-01 br_handle_frame()
260 * (Link Aggregation) 802.3 01-80-C2-00-00-02 br_handle_frame()
261 * 802.1X PAE address 01-80-C2-00-00-03 br_handle_frame()
263 * 802.1AB LLDP 01-80-C2-00-00-0E br_handle_frame()
H A Dbr_private.h39 /* The Nearest Customer Bridge Group Address, 01-80-C2-00-00-[00,0B,0C,0D,0F] */
/linux-4.4.14/arch/x86/include/asm/
H A Dacpi.h82 * Check if the CPU can handle C2 and deeper
88 * C2 state. acpi_processor_cstate_check()
123 * If mwait/monitor is unsupported, C2/C3_FFH will be disabled arch_acpi_set_pdc_bits()
H A Dolpc.h55 * C2. During the prototype phase, the following models (in chronological
/linux-4.4.14/arch/sparc/include/asm/
H A Decc.h103 * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only)
109 * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only)
/linux-4.4.14/crypto/
H A Dwp512.c231 static const u64 C2[256] = { variable
806 C2[(int)(K[6] >> 40) & 0xff] ^ wp512_process_buffer()
816 C2[(int)(K[7] >> 40) & 0xff] ^ wp512_process_buffer()
825 C2[(int)(K[0] >> 40) & 0xff] ^ wp512_process_buffer()
834 C2[(int)(K[1] >> 40) & 0xff] ^ wp512_process_buffer()
843 C2[(int)(K[2] >> 40) & 0xff] ^ wp512_process_buffer()
852 C2[(int)(K[3] >> 40) & 0xff] ^ wp512_process_buffer()
861 C2[(int)(K[4] >> 40) & 0xff] ^ wp512_process_buffer()
870 C2[(int)(K[5] >> 40) & 0xff] ^ wp512_process_buffer()
888 C2[(int)(state[6] >> 40) & 0xff] ^ wp512_process_buffer()
898 C2[(int)(state[7] >> 40) & 0xff] ^ wp512_process_buffer()
908 C2[(int)(state[0] >> 40) & 0xff] ^ wp512_process_buffer()
918 C2[(int)(state[1] >> 40) & 0xff] ^ wp512_process_buffer()
928 C2[(int)(state[2] >> 40) & 0xff] ^ wp512_process_buffer()
938 C2[(int)(state[3] >> 40) & 0xff] ^ wp512_process_buffer()
948 C2[(int)(state[4] >> 40) & 0xff] ^ wp512_process_buffer()
958 C2[(int)(state[5] >> 40) & 0xff] ^ wp512_process_buffer()
/linux-4.4.14/drivers/media/dvb-frontends/
H A Dascot2e.h4 * Sony Ascot3E DVB-T/T2/C/C2 tuner driver
H A Dascot2e.c4 * Sony Ascot3E DVB-T/T2/C/C2 tuner driver
H A Dtda18271c2dd.c409 if (state->m_Regs[ID] != 0x83) /* C1: ID == 83, C2: ID == 84 */ CalibrateRF()
H A Dcxd2841er.c2582 type = "C/C2"; cxd2841er_attach()
2725 MODULE_DESCRIPTION("Sony CXD2841ER DVB-C/C2/T/T2/S/S2 demodulator driver");
/linux-4.4.14/arch/sh/kernel/cpu/shmobile/
H A Dcpuidle.c71 .name = "C2",
/linux-4.4.14/arch/arm/mach-omap2/
H A Dcpuidle44xx.c201 /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
206 .name = "C2",
H A Dboard-rx51.c72 | C2 | 106 + 180 | 309 |
H A Dcpuidle34xx.c276 .name = "C2",
339 .name = "C2",
/linux-4.4.14/sound/soc/codecs/
H A Dsta32x.h164 #define STA32X_CxCFG_TCB 0x01 /* only C1 and C2 */
166 #define STA32X_CxCFG_EQBP 0x02 /* only C1 and C2 */
H A Dcs4349.h38 #define CS4349_REVC2 0xFF /* Rev C2 */
H A Dmax98088.c251 { 0xc2, 0x00 }, /* C2 DAI2 biquad */
H A Dmax98090.c235 { 0xC2, 0x00 }, /* C2 Sample Rate */
/linux-4.4.14/drivers/acpi/
H A Dprocessor_idle.c74 * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
125 * Some BIOS implementations switch to C3 in the published C2 state.
128 * that the local APIC stops in both C2 and C3.
269 * Check for P_LVL2_UP flag before entering C2 and above on acpi_processor_get_power_info_fadt()
277 /* determine C2 and C3 address from pblk */ acpi_processor_get_power_info_fadt()
286 * FADT specified C2 latency must be less than or equal to acpi_processor_get_power_info_fadt()
291 "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency)); acpi_processor_get_power_info_fadt()
292 /* invalidate C2 */ acpi_processor_get_power_info_fadt()
637 * if one state of type C2 or C3 is available, mark this acpi_processor_get_power_info()
/linux-4.4.14/tools/power/cpupower/utils/idle_monitor/
H A Dcpuidle_sysfs.c117 strcpy(tmp, "C2"); fix_up_intel_idle_driver_name()
H A Dhsw_ext_idle.c43 .desc = N_("Processor Package C2"),
H A Dsnb_idle.c40 .desc = N_("Processor Package C2"),
/linux-4.4.14/arch/m68k/fpsp040/
H A Dsatan.S408 |--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
410 |--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
432 faddd ATANC2,%fp2 | ...C2+Z*C4
435 fmulx %fp0,%fp2 | ...Y*(C2+Z*C4)
440 faddx %fp2,%fp1 | ...[Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
/linux-4.4.14/drivers/hwmon/
H A Dads7828.c56 /* Command byte C2,C1,C0 - see datasheet */ ads7828_cmd_byte()
H A Dk10temp.c178 * format. It still isn't perfect, as RB-C2 cores exist in both AM2+ has_erratum_319()
/linux-4.4.14/arch/x86/kernel/acpi/
H A Dcstate.c97 /* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */ acpi_processor_ffh_cstate_probe_cpu()
/linux-4.4.14/include/media/
H A Dadv7842.h116 u16 C2; member in struct:adv7842_sdp_csc_coeff
/linux-4.4.14/block/
H A Dblk-flush.c43 * C2. Flush is deferred if any request is executing DATA of its sequence.
52 * For devices which support FUA, it isn't clear whether C2 (and thus C3)
301 /* C2 and C3 */ blk_kick_flush()
/linux-4.4.14/arch/x86/kernel/
H A Dprocess.c477 * forced to be used for CPU idle. In such case CPU C2/C3 idle_setup()
487 * it means that mwait will be disabled for CPU C2/C3 idle_setup()
/linux-4.4.14/drivers/iio/dac/
H A Dad5624r_spi.c32 * don't care bits. The next three are the command bits, C2 to C0, ad5624r_spi_write()
/linux-4.4.14/drivers/media/i2c/soc_camera/
H A Dov2640.c122 * 1: Low byte first UYVY (C2[4] =0)
123 * VYUY (C2[4] =1)
124 * 0: High byte first YUYV (C2[4]=0)
125 * YVYU (C2[4] = 1) */
/linux-4.4.14/drivers/block/
H A Dcciss_cmd.h144 #define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */
/linux-4.4.14/arch/arc/include/asm/
H A Dmmu_context.h142 * e.g. T1 runs on C1, migrates to C3. T2 running on C2 munmaps. switch_mm()
/linux-4.4.14/drivers/video/fbdev/
H A Dssd1307fb.c172 * C0 C1 C2 C3 C4 ssd1307fb_update_display()
182 * (3) A2 B2 C2 D2 E2 F2 G2 H2 ssd1307fb_update_display()
/linux-4.4.14/include/acpi/
H A Dactbl.h260 u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */
312 #define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */
/linux-4.4.14/drivers/rtc/
H A Drtc-rv3029c2.c2 * Micro Crystal RV-3029C2 rtc class driver
/linux-4.4.14/drivers/platform/x86/
H A Dasus-nb-wmi.c39 #define ASUS_NB_WMI_EVENT_GUID "0B3CBB35-E3C2-45ED-91C2-4C5A6D195D1C"
/linux-4.4.14/arch/mips/kernel/
H A Dmips-cm.c342 "C3=%s C2=%s C1=%s C0=%s SC=%s " mips_cm_error_report()
/linux-4.4.14/arch/sh/boards/
H A Dboard-magicpanelr2.c111 * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; setup_port_multiplexing()
/linux-4.4.14/drivers/isdn/hardware/avm/
H A Dc4.c3 * Module for AVM C4 & C2 card.
52 MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM C2/C4 cards");
1089 case avm_c2: s = "C2"; break; c4_proc_show()
H A Db1.c660 case avm_c2: s = "C2"; break; b1ctl_proc_show()
H A Db1dma.c884 case avm_c2: s = "C2"; break; b1dmactl_proc_show()
/linux-4.4.14/drivers/idle/
H A Dintel_idle.c117 * 0x00 means "MWAIT(C1)", 0x10 means "MWAIT(C2)" etc.
673 .name = "C2-ATM",
1133 " states deeper than C2"); intel_idle_cpuidle_driver_init()
/linux-4.4.14/drivers/media/i2c/
H A Dad9389b.c183 u16 C1, u16 C2, u16 C3, u16 C4) ad9389b_csc_coeff()
208 ad9389b_wr_and_or(sd, 0x2A, 0xe0, C2>>8); ad9389b_csc_coeff()
209 ad9389b_wr(sd, 0x2B, C2); ad9389b_csc_coeff()
180 ad9389b_csc_coeff(struct v4l2_subdev *sd, u16 A1, u16 A2, u16 A3, u16 A4, u16 B1, u16 B2, u16 B3, u16 B4, u16 C1, u16 C2, u16 C3, u16 C4) ad9389b_csc_coeff() argument
H A Dadv7511.c290 u16 C1, u16 C2, u16 C3, u16 C4) adv7511_csc_coeff()
315 adv7511_wr_and_or(sd, 0x2A, 0xe0, C2>>8); adv7511_csc_coeff()
316 adv7511_wr(sd, 0x2B, C2); adv7511_csc_coeff()
287 adv7511_csc_coeff(struct v4l2_subdev *sd, u16 A1, u16 A2, u16 A3, u16 A4, u16 B1, u16 B2, u16 B3, u16 B4, u16 C1, u16 C2, u16 C3, u16 C4) adv7511_csc_coeff() argument
H A Dadv7842.c1777 sdp_io_write_and_or(sd, 0xf2, 0xe0, c->C2 >> 8); sdp_csc_coeff()
1778 sdp_io_write(sd, 0xf3, c->C2); sdp_csc_coeff()
/linux-4.4.14/drivers/net/wireless/b43/
H A Dradio_2055.h59 #define B2055_PLL_LFC2 0x34 /* PLL LF C2 */
/linux-4.4.14/arch/x86/kernel/cpu/
H A Dperf_event_intel_cstate.c57 * MSR_PKG_C2_RESIDENCY: Package C2 Residency Counter.
H A Dintel.c267 * i.e. all B steppings and the C2 stepping of P54C when using their intel_workarounds()
/linux-4.4.14/drivers/pinctrl/nomadik/
H A Dpinctrl-nomadik-db8500.c613 /* Other C2 column */
784 /* Other alt C2 column */
H A Dpinctrl-nomadik-db8540.c585 /* Other alt C2 column */
782 /* Other alt C2 column */
/linux-4.4.14/include/uapi/linux/
H A Dixjuser.h204 hz523 = 0x7559, /* .25 C2 */
279 C2 = hz523, enumerator in enum:__anon14184
/linux-4.4.14/sound/pci/hda/
H A Dpatch_cirrus.c244 /* Errata: CS4207 rev C0/C1/C2 Silicon
313 /* init_verb sequence for C0/C1/C2 errata*/ cs_init()
H A Dpatch_sigmatel.c1246 102801C2 (Dell Latitude D620)
/linux-4.4.14/drivers/scsi/
H A Ddc395x.h467 /* C2 Transfer information in with FIFO */
H A Dhpsa_cmd.h285 #define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */
H A Dfdomain.c454 FUTURE DOMAIN CORP. (C) 1986-1989 V5.0C2/14/89
/linux-4.4.14/drivers/media/common/
H A Dtveeprom.c262 { TUNER_PHILIPS_TDA8290, "NXP 18271C2"},
/linux-4.4.14/drivers/ata/
H A Dpata_ali.c86 * Perform cable detection for C2 and later revisions
/linux-4.4.14/drivers/gpu/drm/i915/
H A Ddvo_ns2501.c211 uint16_t hstart; /* horizontal start, registers C1/C2 */
H A Di915_reg.h1804 /* Enable render writes to complete in C2/C3/C4 power states.
/linux-4.4.14/lib/fonts/
H A Dfont_acorn_8x8.c200 /* C2 */ 0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18,
/linux-4.4.14/net/sctp/
H A Dtransport.c338 /* 6.3.1 C2) When the first RTT measurement R is made, set sctp_transport_update_rto()
H A Doutqueue.c1709 /* PR-SCTP C2) Try to further advance the "Advanced.Peer.Ack.Point" sctp_generate_fwdtsn()
1763 /* PR-SCTP C3) If, after step C1 and C2, the "Advanced.Peer.Ack.Point" sctp_generate_fwdtsn()
/linux-4.4.14/drivers/usb/serial/
H A Dio_usbvend.h534 __u8 DescVer; // C2 Desc version/format
/linux-4.4.14/drivers/scsi/qla4xxx/
H A Dql4_fw.h906 uint16_t chap_tbl_idx; /* 1C2-1C3 */
/linux-4.4.14/drivers/media/pci/netup_unidvb/
H A Dnetup_unidvb_core.c448 /* DVB-C/C2 frontend */ netup_unidvb_dvb_init()
/linux-4.4.14/drivers/media/tuners/
H A Dtda18271-fe.c1184 name = "TDA18271HD/C2"; tda18271_get_id()
/linux-4.4.14/drivers/pinctrl/mediatek/
H A Dpinctrl-mtk-mt8135.h2057 "C2", "mt8135",
/linux-4.4.14/drivers/pinctrl/
H A Dpinctrl-u300.c339 PINCTRL_PIN(151, "PIO PDI C2"),
/linux-4.4.14/sound/isa/cs423x/
H A Dcs4236_lib.c42 * C2
/linux-4.4.14/drivers/media/usb/em28xx/
H A Dem28xx-cards.c2087 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
2096 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
/linux-4.4.14/arch/sparc/kernel/
H A Dtraps_64.c1059 #define C2 130 macro
1071 /*00*/NONE, C0, C1, M2, C2, M2, M3, 47, C3, M2, M2, 53, M2, 41, 29, M,
/linux-4.4.14/drivers/net/ethernet/dlink/
H A Ddl2k.c1162 /* RxFlowcontrol DA: 01-80-C2-00-00-01. Hash index=0x39 */ set_multicast()
/linux-4.4.14/fs/ext4/
H A Dextents.c3466 * - C2: abut_ex is logically abutting ex, ext4_ext_convert_to_initialized()
3472 ((prev_lblk + prev_len) == ee_block) && /*C2*/ ext4_ext_convert_to_initialized()
3512 * - C2: abut_ex is logically abutting ex, ext4_ext_convert_to_initialized()
3518 ((map->m_lblk + map_len) == next_lblk) && /*C2*/ ext4_ext_convert_to_initialized()
/linux-4.4.14/arch/x86/kernel/apic/
H A Dapic.c165 /* Local APIC timer works in C2 */
/linux-4.4.14/arch/m68k/ifpsp060/src/
H A Dfplsp.S6411 #--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
6413 #--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
6436 fadd.d ATANC2(%pc),%fp2 # C2+Z*C4
6439 fmul.x %fp0,%fp2 # Y*(C2+Z*C4)
6444 fadd.x %fp2,%fp1 # [Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
H A Dfpsp.S6517 #--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
6519 #--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
6542 fadd.d ATANC2(%pc),%fp2 # C2+Z*C4
6545 fmul.x %fp0,%fp2 # Y*(C2+Z*C4)
6550 fadd.x %fp2,%fp1 # [Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
/linux-4.4.14/drivers/mfd/
H A Ddb8500-prcmu.c2624 return "U8500 C2"; fw_project_name()
/linux-4.4.14/drivers/net/ethernet/broadcom/bnx2x/
H A Dbnx2x_reg.h2211 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
2380 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
2492 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
2528 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
/linux-4.4.14/drivers/isdn/hardware/eicon/
H A Dmessage.c370 0x83 /* Ext, BR , res, res, C2 , C1 , B , F */
377 0xc3 | V120_HEADER_BREAK_BIT /* Ext, BR , res, res, C2 , C1 , B , F */
/linux-4.4.14/drivers/message/fusion/
H A Dmptbase.c1621 product_str = "LSISAS1078 C2"; mpt_get_product_name()

Completed in 2269 milliseconds