| /linux-4.1.27/tools/usb/ |
| D | hcd-tests.sh | 67 CONFIG=''
71 if [ "$CONFIG" = "" ]; then
72 CONFIG=$1
73 echo "assuming $CONFIG configuration"
76 if [ "$CONFIG" = $1 ]; then
80 echo "** device must be in $1 config, but it's $CONFIG instead"
|
| /linux-4.1.27/Documentation/devicetree/bindings/pinctrl/ |
| D | fsl,imx51-pinctrl.txt | 9 setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
10 pin working on a specific function, CONFIG is the pad setting value like
14 CONFIG bits definition:
|
| D | fsl,imx6q-pinctrl.txt | 9 setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
10 pin working on a specific function, CONFIG is the pad setting value like
14 CONFIG bits definition:
|
| D | fsl,imx53-pinctrl.txt | 9 setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
10 pin working on a specific function, CONFIG is the pad setting value like
14 CONFIG bits definition:
|
| D | fsl,imx35-pinctrl.txt | 9 setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
10 pin working on a specific function, CONFIG is the pad setting value like
14 CONFIG bits definition:
|
| D | fsl,imx6dl-pinctrl.txt | 9 setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
10 pin working on a specific function, CONFIG is the pad setting value like
14 CONFIG bits definition:
|
| D | fsl,imx6sl-pinctrl.txt | 9 setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
10 pin working on a specific function, CONFIG is the pad setting value like
14 CONFIG bits definition:
|
| D | fsl,imx6sx-pinctrl.txt | 11 imx6sx-pinfunc.h under device tree source folder. The last integer CONFIG is
13 Reference Manual for detailed CONFIG settings.
15 CONFIG bits definition:
|
| D | fsl,vf610-pinctrl.txt | 9 setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is
10 a pin working on a specific function, CONFIG is the pad setting value
14 CONFIG bits definition:
|
| D | fsl,imx-pinctrl.txt | 28 imx*-pinfunc.h under device tree source folder. The last integer CONFIG is
30 looks like <PIN_FUNC_ID CONFIG> in the example below.
32 Bits used for CONFIG:
|
| D | fsl,imx25-pinctrl.txt | 6 CONFIG bits definition:
|
| D | fsl,imx27-pinctrl.txt | 10 setting. The format is fsl,pins = <PIN MUX_ID CONFIG>.
52 CONFIG can be 0 or 1, meaning Pullup disable/enable.
|
| D | atmel,at91-pinctrl.txt | 84 setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
88 Bits used for CONFIG:
|
| /linux-4.1.27/Documentation/ja_JP/ |
| D | SubmitChecklist | 33 1: 妥当なCONFIGオプションや変更されたCONFIGオプション、つまり =y, =m, =n
48 6: CONFIGオプションの追加・変更をした場合には、CONFIGメニューが壊れていない
|
| /linux-4.1.27/drivers/net/wireless/ath/ath9k/ |
| D | htc_drv_main.c | 272 ath_dbg(common, CONFIG, in ath9k_htc_set_channel()
425 ath_dbg(common, CONFIG, in ath9k_htc_add_monitor_interface()
462 ath_dbg(common, CONFIG, in ath9k_htc_remove_monitor_interface()
518 ath_dbg(common, CONFIG, in ath9k_htc_add_station()
522 ath_dbg(common, CONFIG, in ath9k_htc_add_station()
562 ath_dbg(common, CONFIG, in ath9k_htc_remove_station()
566 ath_dbg(common, CONFIG, in ath9k_htc_remove_station()
673 ath_dbg(common, CONFIG, in ath9k_htc_init_rate()
700 ath_dbg(common, CONFIG, in ath9k_htc_update_rate()
729 ath_dbg(common, CONFIG, in ath9k_htc_tx_aggr_oper()
[all …]
|
| D | htc_drv_beacon.c | 338 ath_dbg(common, CONFIG, "Added interface at beacon slot: %d\n", in ath9k_htc_assign_bslot()
352 ath_dbg(common, CONFIG, "Removed interface at beacon slot: %d\n", in ath9k_htc_remove_bslot()
379 ath_dbg(common, CONFIG, "tsfadjust is: %llu for bslot: %d\n", in ath9k_htc_set_tsfadjust()
410 ath_dbg(common, CONFIG, in ath9k_htc_check_beacon_config()
421 ath_dbg(common, CONFIG, in ath9k_htc_check_beacon_config()
439 ath_dbg(common, CONFIG, in ath9k_htc_check_beacon_config()
480 ath_dbg(common, CONFIG, "Unsupported beaconing mode\n"); in ath9k_htc_beacon_config()
502 ath_dbg(common, CONFIG, "Unsupported beaconing mode\n"); in ath9k_htc_beacon_reconfig()
|
| D | beacon.c | 213 ath_dbg(common, CONFIG, "Added interface at beacon slot: %d\n", in ath9k_beacon_assign_slot()
224 ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n", in ath9k_beacon_remove_slot()
290 ath_dbg(common, CONFIG, "tsfadjust is: %llu for bslot: %d\n", in ath9k_set_tsfadjust()
528 ath_dbg(common, CONFIG, in ath9k_allow_beacon_config()
538 ath_dbg(common, CONFIG, in ath9k_allow_beacon_config()
683 ath_dbg(common, CONFIG, "Unsupported beaconing mode\n"); in ath9k_set_beacon()
|
| D | main.c | 315 ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", in ath_reset_internal()
657 ath_dbg(common, CONFIG, in ath9k_start()
899 ath_dbg(common, CONFIG, "Driver halt\n"); in ath9k_stop()
1033 ath_dbg(common, CONFIG, in ath9k_set_assoc_state()
1170 ath_dbg(common, CONFIG, in ath9k_calculate_summary_state()
1246 ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type); in ath9k_add_interface()
1290 ath_dbg(common, CONFIG, "Change Interface\n"); in ath9k_change_interface()
1317 ath_dbg(common, CONFIG, "Detach Interface\n"); in ath9k_remove_interface()
1427 ath_dbg(common, CONFIG, "Monitor mode is enabled\n"); in ath9k_config()
1430 ath_dbg(common, CONFIG, "Monitor mode is disabled\n"); in ath9k_config()
[all …]
|
| D | common-spectral.c | 332 ath_dbg(common, CONFIG, "spectral scan: background mode enabled\n"); in write_file_spec_scan_ctl()
335 ath_dbg(common, CONFIG, "spectral scan: channel scan mode enabled\n"); in write_file_spec_scan_ctl()
338 ath_dbg(common, CONFIG, "spectral scan: manual mode enabled\n"); in write_file_spec_scan_ctl()
341 ath_dbg(common, CONFIG, "spectral scan: disabled\n"); in write_file_spec_scan_ctl()
|
| D | common-init.c | 214 ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n", in ath9k_cmn_setup_ht_cap()
|
| D | init.c | 233 ath_dbg(common, CONFIG, "%s DMA: %u buffers %u desc/buf\n", in ath_descdma_setup()
277 ath_dbg(common, CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n", in ath_descdma_setup()
|
| D | htc_drv_init.c | 889 ath_dbg(common, CONFIG, in ath9k_init_device()
|
| D | recv.c | 286 ath_dbg(common, CONFIG, "cachelsz %u rxbufsize %u\n", in ath_rx_init()
|
| D | ar5008_phy.c | 166 ath_dbg(common, CONFIG, "Force rf_pwd_icsyndiv to %1d on %4d\n", in ar5008_hw_force_bias()
|
| D | channel.c | 41 ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n", in ath_set_channel()
|
| D | debug.c | 268 ath_dbg(common, CONFIG, "Enable WLAN/BT RX Antenna diversity: %d\n", in write_file_bt_ant_diversity()
|
| D | hw.c | 522 ath_dbg(ath9k_hw_common(ah), CONFIG, "Eeprom VER: %d, REV: %d\n", in ath9k_hw_post_init()
|
| /linux-4.1.27/drivers/media/usb/dvb-usb-v2/ |
| D | ec168.h | 40 CONFIG = 0x01, enumerator
|
| D | ec168.c | 49 request = CONFIG; in ec168_ctrl_msg()
53 request = CONFIG; in ec168_ctrl_msg()
|
| /linux-4.1.27/arch/um/kernel/ |
| D | config.c.in | 11 "CONFIG"
|
| /linux-4.1.27/drivers/staging/ozwpan/ |
| D | TODO | 6 - Modify Kconfig to add CONFIG option for enabling/disabling event
|
| /linux-4.1.27/drivers/media/dvb-frontends/ |
| D | mt352_priv.h | 117 CONFIG = 0x8A, enumerator
|
| D | mt312.c | 253 ret = mt312_writereg(state, CONFIG, in mt312_initfe()
582 ret = mt312_readreg(state, CONFIG, &config_val); in mt312_set_frontend()
720 ret = mt312_readreg(state, CONFIG, &config); in mt312_sleep()
725 ret = mt312_writereg(state, CONFIG, config & 0x7f); in mt312_sleep()
|
| D | mt312_priv.h | 156 CONFIG = 127 enumerator
|
| D | mt352.c | 525 (mt352_read_register(state, CONFIG) & 0x20) == 0) { in mt352_init()
|
| /linux-4.1.27/Documentation/hwmon/ |
| D | smsc47b397 | 92 to the CONFIG PORT (0x2E).
95 In configuration mode, the INDEX PORT is located at the CONFIG PORT address and
110 To exit the Configuration State the write 0xAA to the CONFIG PORT (0x2E).
|
| /linux-4.1.27/drivers/staging/media/dt3155v4l/ |
| D | dt3155v4l.h | 62 #define CONFIG 0x13 macro
|
| D | dt3155v4l.c | 208 write_i2c_reg(pd->regs, CONFIG, pd->config); in dt3155_start_acq()
776 write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM); in dt3155_init_board()
781 write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM | PM_LUT_SEL); in dt3155_init_board()
786 write_i2c_reg(pd->regs, CONFIG, pd->config); /* ACQ_MODE_EVEN */ in dt3155_init_board()
805 write_i2c_reg(pd->regs, CONFIG, pd->config); in dt3155_init_board()
|
| /linux-4.1.27/drivers/net/ethernet/smsc/ |
| D | smc9194.c | 957 configuration_register = inw( ioaddr + CONFIG ); in smc_probe()
1093 outw( inw( ioaddr + CONFIG ) & ~CFG_AUI_SELECT, in smc_open()
1094 ioaddr + CONFIG ); in smc_open()
1097 outw( inw( ioaddr + CONFIG ) | CFG_AUI_SELECT, in smc_open()
1098 ioaddr + CONFIG ); in smc_open()
|
| D | smc9194.h | 97 #define CONFIG 0 macro
|
| D | smc91c92_cs.c | 176 #define CONFIG 0 macro
778 s = inb(ioaddr + CONFIG); in check_sig()
783 outb(s, ioaddr + CONFIG); in check_sig()
895 smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT; in smc91c92_config()
1620 outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG); in smc_set_xcvr()
1626 outw(smc->cfg, ioaddr + CONFIG); in smc_set_xcvr()
1737 media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1; in media_check()
1854 tmp = inw(ioaddr + CONFIG); in smc_netdev_get_ecmd()
|
| /linux-4.1.27/Documentation/ |
| D | SubmitChecklist | 16 2: Builds cleanly with applicable or modified CONFIG options =y, =m, and
35 6: Any new or modified CONFIG options don't muck up the config menu.
|
| /linux-4.1.27/Documentation/sound/oss/ |
| D | mwave | 76 if "%CONFIG%" == "W95" goto W95
87 c:\linux\boot\loadlin.exe @c:\linux\boot\parms\%CONFIG%.par
|
| /linux-4.1.27/drivers/scsi/ |
| D | ultrastor.c | 207 #define CONFIG(port) ((port) + 0x6) macro
454 *(char *)&config_1 = inb(CONFIG(config.port_address + 0)); in ultrastor_14f_detect()
455 *(char *)&config_2 = inb(CONFIG(config.port_address + 1)); in ultrastor_14f_detect()
|
| /linux-4.1.27/Documentation/fmc/ |
| D | identifiers.txt | 124 in the file called -SDB-CONFIG-). Reading documentation for gensdbfs
148 -rw-rw-r-- 1 rubini staff 975 Nov 19 18:08 --SDB-CONFIG--
|
| /linux-4.1.27/Documentation/s390/ |
| D | monreader.txt | 37 You can use the CP command DEF STOR CONFIG to define a "memory hole" in your
40 Example: DEF STOR CONFIG 0.140M 200M.200M
|
| /linux-4.1.27/fs/nfsd/ |
| D | Kconfig | 64 related CONFIG options for your local file systems of choice.
|
| /linux-4.1.27/Documentation/locking/ |
| D | locktorture.txt | 5 The CONFIG LOCK_TORTURE_TEST config option provides a kernel module
|
| D | mutex-design.txt | 102 These semantics are fully enforced when CONFIG DEBUG_MUTEXES is enabled.
|
| /linux-4.1.27/drivers/staging/dgap/ |
| D | dgap.h | 223 #define CONFIG 0x0CD0L /* Concentrator configuration info */ macro
|
| D | dgap.c | 6124 config = addr + CONFIG; in dgap_do_fep_load()
|
| /linux-4.1.27/Documentation/kbuild/ |
| D | kconfig.txt | 150 SEARCHING for CONFIG symbols
|
| D | makefiles.txt | 740 when no CONFIG symbols are involved.
|
| /linux-4.1.27/Documentation/networking/ |
| D | de4x5.txt | 171 For a compiled in driver, in linux/drivers/net/CONFIG, place e.g.
|
| /linux-4.1.27/drivers/media/usb/dvb-usb/ |
| D | m920x.c | 488 u8 config[] = { CONFIG, 0x3d }; in m920x_mt352_demod_init()
|
| /linux-4.1.27/Documentation/sound/alsa/ |
| D | OSS-Emulation.txt | 38 even if "NOT ENABLED IN CONFIG" is shown in it.
|
| D | ALSA-Configuration.txt | 324 their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
358 their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
|
| /linux-4.1.27/Documentation/laptops/ |
| D | laptop-mode.txt | 236 --------------------CONFIG FILE BEGIN-------------------------------------------
312 --------------------CONFIG FILE END---------------------------------------------
|
| /linux-4.1.27/arch/blackfin/kernel/ |
| D | debug-mmrs.c | 220 __DMA(CONFIG, config); in bfin_debug_mmrs_dma()
278 __GPTIMER(CONFIG, config); in bfin_debug_mmrs_gptimer()
|
| /linux-4.1.27/tools/perf/util/ |
| D | parse-events.c | 127 #define PERF_EVENT_CONFIG(config) __PERF_EVENT_FIELD(config, CONFIG)
|
| /linux-4.1.27/drivers/video/fbdev/omap2/dss/ |
| D | dispc.c | 292 SR(CONFIG); in dispc_save_context()
402 RR(CONFIG); in dispc_restore_context()
|
| /linux-4.1.27/Documentation/RCU/ |
| D | RTFP.txt | 1301 ,Title="{[RFC]} {RCU} and {CONFIG\_PREEMPT\_RT} progress"
1383 ,Title="{[RFC,PATCH] RCU} and {CONFIG\_PREEMPT\_RT} sane patch"
|
| /linux-4.1.27/Documentation/filesystems/ |
| D | proc.txt | 203 (for SMP CONFIG users)
|