1 /*
2  *  64-bit pSeries and RS/6000 setup code.
3  *
4  *  Copyright (C) 1995  Linus Torvalds
5  *  Adapted from 'alpha' version by Gary Thomas
6  *  Modified by Cort Dougan (cort@cs.nmt.edu)
7  *  Modified by PPC64 Team, IBM Corp
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License
11  * as published by the Free Software Foundation; either version
12  * 2 of the License, or (at your option) any later version.
13  */
14 
15 /*
16  * bootup setup stuff..
17  */
18 
19 #include <linux/cpu.h>
20 #include <linux/errno.h>
21 #include <linux/sched.h>
22 #include <linux/kernel.h>
23 #include <linux/mm.h>
24 #include <linux/stddef.h>
25 #include <linux/unistd.h>
26 #include <linux/user.h>
27 #include <linux/tty.h>
28 #include <linux/major.h>
29 #include <linux/interrupt.h>
30 #include <linux/reboot.h>
31 #include <linux/init.h>
32 #include <linux/ioport.h>
33 #include <linux/console.h>
34 #include <linux/pci.h>
35 #include <linux/utsname.h>
36 #include <linux/adb.h>
37 #include <linux/export.h>
38 #include <linux/delay.h>
39 #include <linux/irq.h>
40 #include <linux/seq_file.h>
41 #include <linux/root_dev.h>
42 #include <linux/of.h>
43 #include <linux/kexec.h>
44 
45 #include <asm/mmu.h>
46 #include <asm/processor.h>
47 #include <asm/io.h>
48 #include <asm/pgtable.h>
49 #include <asm/prom.h>
50 #include <asm/rtas.h>
51 #include <asm/pci-bridge.h>
52 #include <asm/iommu.h>
53 #include <asm/dma.h>
54 #include <asm/machdep.h>
55 #include <asm/irq.h>
56 #include <asm/time.h>
57 #include <asm/nvram.h>
58 #include <asm/pmc.h>
59 #include <asm/mpic.h>
60 #include <asm/xics.h>
61 #include <asm/ppc-pci.h>
62 #include <asm/i8259.h>
63 #include <asm/udbg.h>
64 #include <asm/smp.h>
65 #include <asm/firmware.h>
66 #include <asm/eeh.h>
67 #include <asm/reg.h>
68 #include <asm/plpar_wrappers.h>
69 
70 #include "pseries.h"
71 
72 int CMO_PrPSP = -1;
73 int CMO_SecPSP = -1;
74 unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K);
75 EXPORT_SYMBOL(CMO_PageSize);
76 
77 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
78 
79 static struct device_node *pSeries_mpic_node;
80 
pSeries_show_cpuinfo(struct seq_file * m)81 static void pSeries_show_cpuinfo(struct seq_file *m)
82 {
83 	struct device_node *root;
84 	const char *model = "";
85 
86 	root = of_find_node_by_path("/");
87 	if (root)
88 		model = of_get_property(root, "model", NULL);
89 	seq_printf(m, "machine\t\t: CHRP %s\n", model);
90 	of_node_put(root);
91 }
92 
93 /* Initialize firmware assisted non-maskable interrupts if
94  * the firmware supports this feature.
95  */
fwnmi_init(void)96 static void __init fwnmi_init(void)
97 {
98 	unsigned long system_reset_addr, machine_check_addr;
99 
100 	int ibm_nmi_register = rtas_token("ibm,nmi-register");
101 	if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
102 		return;
103 
104 	/* If the kernel's not linked at zero we point the firmware at low
105 	 * addresses anyway, and use a trampoline to get to the real code. */
106 	system_reset_addr  = __pa(system_reset_fwnmi) - PHYSICAL_START;
107 	machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START;
108 
109 	if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr,
110 				machine_check_addr))
111 		fwnmi_active = 1;
112 }
113 
pseries_8259_cascade(unsigned int irq,struct irq_desc * desc)114 static void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
115 {
116 	struct irq_chip *chip = irq_desc_get_chip(desc);
117 	unsigned int cascade_irq = i8259_irq();
118 
119 	if (cascade_irq != NO_IRQ)
120 		generic_handle_irq(cascade_irq);
121 
122 	chip->irq_eoi(&desc->irq_data);
123 }
124 
pseries_setup_i8259_cascade(void)125 static void __init pseries_setup_i8259_cascade(void)
126 {
127 	struct device_node *np, *old, *found = NULL;
128 	unsigned int cascade;
129 	const u32 *addrp;
130 	unsigned long intack = 0;
131 	int naddr;
132 
133 	for_each_node_by_type(np, "interrupt-controller") {
134 		if (of_device_is_compatible(np, "chrp,iic")) {
135 			found = np;
136 			break;
137 		}
138 	}
139 
140 	if (found == NULL) {
141 		printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
142 		return;
143 	}
144 
145 	cascade = irq_of_parse_and_map(found, 0);
146 	if (cascade == NO_IRQ) {
147 		printk(KERN_ERR "pic: failed to map cascade interrupt");
148 		return;
149 	}
150 	pr_debug("pic: cascade mapped to irq %d\n", cascade);
151 
152 	for (old = of_node_get(found); old != NULL ; old = np) {
153 		np = of_get_parent(old);
154 		of_node_put(old);
155 		if (np == NULL)
156 			break;
157 		if (strcmp(np->name, "pci") != 0)
158 			continue;
159 		addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
160 		if (addrp == NULL)
161 			continue;
162 		naddr = of_n_addr_cells(np);
163 		intack = addrp[naddr-1];
164 		if (naddr > 1)
165 			intack |= ((unsigned long)addrp[naddr-2]) << 32;
166 	}
167 	if (intack)
168 		printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
169 	i8259_init(found, intack);
170 	of_node_put(found);
171 	irq_set_chained_handler(cascade, pseries_8259_cascade);
172 }
173 
pseries_mpic_init_IRQ(void)174 static void __init pseries_mpic_init_IRQ(void)
175 {
176 	struct device_node *np;
177 	const unsigned int *opprop;
178 	unsigned long openpic_addr = 0;
179 	int naddr, n, i, opplen;
180 	struct mpic *mpic;
181 
182 	np = of_find_node_by_path("/");
183 	naddr = of_n_addr_cells(np);
184 	opprop = of_get_property(np, "platform-open-pic", &opplen);
185 	if (opprop != NULL) {
186 		openpic_addr = of_read_number(opprop, naddr);
187 		printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
188 	}
189 	of_node_put(np);
190 
191 	BUG_ON(openpic_addr == 0);
192 
193 	/* Setup the openpic driver */
194 	mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
195 			MPIC_NO_RESET, 16, 0, " MPIC     ");
196 	BUG_ON(mpic == NULL);
197 
198 	/* Add ISUs */
199 	opplen /= sizeof(u32);
200 	for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
201 		unsigned long isuaddr = of_read_number(opprop + i, naddr);
202 		mpic_assign_isu(mpic, n, isuaddr);
203 	}
204 
205 	/* Setup top-level get_irq */
206 	ppc_md.get_irq = mpic_get_irq;
207 
208 	/* All ISUs are setup, complete initialization */
209 	mpic_init(mpic);
210 
211 	/* Look for cascade */
212 	pseries_setup_i8259_cascade();
213 }
214 
pseries_xics_init_IRQ(void)215 static void __init pseries_xics_init_IRQ(void)
216 {
217 	xics_init();
218 	pseries_setup_i8259_cascade();
219 }
220 
pseries_lpar_enable_pmcs(void)221 static void pseries_lpar_enable_pmcs(void)
222 {
223 	unsigned long set, reset;
224 
225 	set = 1UL << 63;
226 	reset = 0;
227 	plpar_hcall_norets(H_PERFMON, set, reset);
228 }
229 
pseries_discover_pic(void)230 static void __init pseries_discover_pic(void)
231 {
232 	struct device_node *np;
233 	const char *typep;
234 
235 	for_each_node_by_name(np, "interrupt-controller") {
236 		typep = of_get_property(np, "compatible", NULL);
237 		if (strstr(typep, "open-pic")) {
238 			pSeries_mpic_node = of_node_get(np);
239 			ppc_md.init_IRQ       = pseries_mpic_init_IRQ;
240 			setup_kexec_cpu_down_mpic();
241 			smp_init_pseries_mpic();
242 			return;
243 		} else if (strstr(typep, "ppc-xicp")) {
244 			ppc_md.init_IRQ       = pseries_xics_init_IRQ;
245 			setup_kexec_cpu_down_xics();
246 			smp_init_pseries_xics();
247 			return;
248 		}
249 	}
250 	printk(KERN_ERR "pSeries_discover_pic: failed to recognize"
251 	       " interrupt-controller\n");
252 }
253 
pci_dn_reconfig_notifier(struct notifier_block * nb,unsigned long action,void * data)254 static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data)
255 {
256 	struct of_reconfig_data *rd = data;
257 	struct device_node *np = rd->dn;
258 	struct pci_dn *pci = NULL;
259 	int err = NOTIFY_OK;
260 
261 	switch (action) {
262 	case OF_RECONFIG_ATTACH_NODE:
263 		pci = np->parent->data;
264 		if (pci) {
265 			update_dn_pci_info(np, pci->phb);
266 
267 			/* Create EEH device for the OF node */
268 			eeh_dev_init(PCI_DN(np), pci->phb);
269 		}
270 		break;
271 	case OF_RECONFIG_DETACH_NODE:
272 		pci = PCI_DN(np);
273 		if (pci)
274 			list_del(&pci->list);
275 		break;
276 	default:
277 		err = NOTIFY_DONE;
278 		break;
279 	}
280 	return err;
281 }
282 
283 static struct notifier_block pci_dn_reconfig_nb = {
284 	.notifier_call = pci_dn_reconfig_notifier,
285 };
286 
287 struct kmem_cache *dtl_cache;
288 
289 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
290 /*
291  * Allocate space for the dispatch trace log for all possible cpus
292  * and register the buffers with the hypervisor.  This is used for
293  * computing time stolen by the hypervisor.
294  */
alloc_dispatch_logs(void)295 static int alloc_dispatch_logs(void)
296 {
297 	int cpu, ret;
298 	struct paca_struct *pp;
299 	struct dtl_entry *dtl;
300 
301 	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
302 		return 0;
303 
304 	if (!dtl_cache)
305 		return 0;
306 
307 	for_each_possible_cpu(cpu) {
308 		pp = &paca[cpu];
309 		dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL);
310 		if (!dtl) {
311 			pr_warn("Failed to allocate dispatch trace log for cpu %d\n",
312 				cpu);
313 			pr_warn("Stolen time statistics will be unreliable\n");
314 			break;
315 		}
316 
317 		pp->dtl_ridx = 0;
318 		pp->dispatch_log = dtl;
319 		pp->dispatch_log_end = dtl + N_DISPATCH_LOG;
320 		pp->dtl_curr = dtl;
321 	}
322 
323 	/* Register the DTL for the current (boot) cpu */
324 	dtl = get_paca()->dispatch_log;
325 	get_paca()->dtl_ridx = 0;
326 	get_paca()->dtl_curr = dtl;
327 	get_paca()->lppaca_ptr->dtl_idx = 0;
328 
329 	/* hypervisor reads buffer length from this field */
330 	dtl->enqueue_to_dispatch_time = cpu_to_be32(DISPATCH_LOG_BYTES);
331 	ret = register_dtl(hard_smp_processor_id(), __pa(dtl));
332 	if (ret)
333 		pr_err("WARNING: DTL registration of cpu %d (hw %d) failed "
334 		       "with %d\n", smp_processor_id(),
335 		       hard_smp_processor_id(), ret);
336 	get_paca()->lppaca_ptr->dtl_enable_mask = 2;
337 
338 	return 0;
339 }
340 #else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
alloc_dispatch_logs(void)341 static inline int alloc_dispatch_logs(void)
342 {
343 	return 0;
344 }
345 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
346 
alloc_dispatch_log_kmem_cache(void)347 static int alloc_dispatch_log_kmem_cache(void)
348 {
349 	dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
350 						DISPATCH_LOG_BYTES, 0, NULL);
351 	if (!dtl_cache) {
352 		pr_warn("Failed to create dispatch trace log buffer cache\n");
353 		pr_warn("Stolen time statistics will be unreliable\n");
354 		return 0;
355 	}
356 
357 	return alloc_dispatch_logs();
358 }
359 machine_early_initcall(pseries, alloc_dispatch_log_kmem_cache);
360 
pseries_lpar_idle(void)361 static void pseries_lpar_idle(void)
362 {
363 	/*
364 	 * Default handler to go into low thread priority and possibly
365 	 * low power mode by cedeing processor to hypervisor
366 	 */
367 
368 	/* Indicate to hypervisor that we are idle. */
369 	get_lppaca()->idle = 1;
370 
371 	/*
372 	 * Yield the processor to the hypervisor.  We return if
373 	 * an external interrupt occurs (which are driven prior
374 	 * to returning here) or if a prod occurs from another
375 	 * processor. When returning here, external interrupts
376 	 * are enabled.
377 	 */
378 	cede_processor();
379 
380 	get_lppaca()->idle = 0;
381 }
382 
383 /*
384  * Enable relocation on during exceptions. This has partition wide scope and
385  * may take a while to complete, if it takes longer than one second we will
386  * just give up rather than wasting any more time on this - if that turns out
387  * to ever be a problem in practice we can move this into a kernel thread to
388  * finish off the process later in boot.
389  */
pSeries_enable_reloc_on_exc(void)390 long pSeries_enable_reloc_on_exc(void)
391 {
392 	long rc;
393 	unsigned int delay, total_delay = 0;
394 
395 	while (1) {
396 		rc = enable_reloc_on_exceptions();
397 		if (!H_IS_LONG_BUSY(rc))
398 			return rc;
399 
400 		delay = get_longbusy_msecs(rc);
401 		total_delay += delay;
402 		if (total_delay > 1000) {
403 			pr_warn("Warning: Giving up waiting to enable "
404 				"relocation on exceptions (%u msec)!\n",
405 				total_delay);
406 			return rc;
407 		}
408 
409 		mdelay(delay);
410 	}
411 }
412 EXPORT_SYMBOL(pSeries_enable_reloc_on_exc);
413 
pSeries_disable_reloc_on_exc(void)414 long pSeries_disable_reloc_on_exc(void)
415 {
416 	long rc;
417 
418 	while (1) {
419 		rc = disable_reloc_on_exceptions();
420 		if (!H_IS_LONG_BUSY(rc))
421 			return rc;
422 		mdelay(get_longbusy_msecs(rc));
423 	}
424 }
425 EXPORT_SYMBOL(pSeries_disable_reloc_on_exc);
426 
427 #ifdef CONFIG_KEXEC
pSeries_machine_kexec(struct kimage * image)428 static void pSeries_machine_kexec(struct kimage *image)
429 {
430 	long rc;
431 
432 	if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
433 		rc = pSeries_disable_reloc_on_exc();
434 		if (rc != H_SUCCESS)
435 			pr_warning("Warning: Failed to disable relocation on "
436 				   "exceptions: %ld\n", rc);
437 	}
438 
439 	default_machine_kexec(image);
440 }
441 #endif
442 
443 #ifdef __LITTLE_ENDIAN__
pseries_big_endian_exceptions(void)444 long pseries_big_endian_exceptions(void)
445 {
446 	long rc;
447 
448 	while (1) {
449 		rc = enable_big_endian_exceptions();
450 		if (!H_IS_LONG_BUSY(rc))
451 			return rc;
452 		mdelay(get_longbusy_msecs(rc));
453 	}
454 }
455 
pseries_little_endian_exceptions(void)456 static long pseries_little_endian_exceptions(void)
457 {
458 	long rc;
459 
460 	while (1) {
461 		rc = enable_little_endian_exceptions();
462 		if (!H_IS_LONG_BUSY(rc))
463 			return rc;
464 		mdelay(get_longbusy_msecs(rc));
465 	}
466 }
467 #endif
468 
find_and_init_phbs(void)469 static void __init find_and_init_phbs(void)
470 {
471 	struct device_node *node;
472 	struct pci_controller *phb;
473 	struct device_node *root = of_find_node_by_path("/");
474 
475 	for_each_child_of_node(root, node) {
476 		if (node->type == NULL || (strcmp(node->type, "pci") != 0 &&
477 					   strcmp(node->type, "pciex") != 0))
478 			continue;
479 
480 		phb = pcibios_alloc_controller(node);
481 		if (!phb)
482 			continue;
483 		rtas_setup_phb(phb);
484 		pci_process_bridge_OF_ranges(phb, node, 0);
485 		isa_bridge_find_early(phb);
486 		phb->controller_ops = pseries_pci_controller_ops;
487 	}
488 
489 	of_node_put(root);
490 	pci_devs_phb_init();
491 
492 	/*
493 	 * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
494 	 * in chosen.
495 	 */
496 	if (of_chosen) {
497 		const int *prop;
498 
499 		prop = of_get_property(of_chosen,
500 				"linux,pci-probe-only", NULL);
501 		if (prop) {
502 			if (*prop)
503 				pci_add_flags(PCI_PROBE_ONLY);
504 			else
505 				pci_clear_flags(PCI_PROBE_ONLY);
506 		}
507 	}
508 }
509 
pSeries_setup_arch(void)510 static void __init pSeries_setup_arch(void)
511 {
512 	set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
513 
514 	/* Discover PIC type and setup ppc_md accordingly */
515 	pseries_discover_pic();
516 
517 	/* openpic global configuration register (64-bit format). */
518 	/* openpic Interrupt Source Unit pointer (64-bit format). */
519 	/* python0 facility area (mmio) (64-bit format) REAL address. */
520 
521 	/* init to some ~sane value until calibrate_delay() runs */
522 	loops_per_jiffy = 50000000;
523 
524 	fwnmi_init();
525 
526 	/* By default, only probe PCI (can be overriden by rtas_pci) */
527 	pci_add_flags(PCI_PROBE_ONLY);
528 
529 	/* Find and initialize PCI host bridges */
530 	init_pci_config_tokens();
531 	find_and_init_phbs();
532 	of_reconfig_notifier_register(&pci_dn_reconfig_nb);
533 
534 	pSeries_nvram_init();
535 
536 	if (firmware_has_feature(FW_FEATURE_LPAR)) {
537 		vpa_init(boot_cpuid);
538 		ppc_md.power_save = pseries_lpar_idle;
539 		ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
540 	} else {
541 		/* No special idle routine */
542 		ppc_md.enable_pmcs = power4_enable_pmcs;
543 	}
544 
545 	ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
546 
547 	if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
548 		long rc;
549 
550 		rc = pSeries_enable_reloc_on_exc();
551 		if (rc == H_P2) {
552 			pr_info("Relocation on exceptions not supported\n");
553 		} else if (rc != H_SUCCESS) {
554 			pr_warn("Unable to enable relocation on exceptions: "
555 				"%ld\n", rc);
556 		}
557 	}
558 }
559 
pSeries_init_panel(void)560 static int __init pSeries_init_panel(void)
561 {
562 	/* Manually leave the kernel version on the panel. */
563 #ifdef __BIG_ENDIAN__
564 	ppc_md.progress("Linux ppc64\n", 0);
565 #else
566 	ppc_md.progress("Linux ppc64le\n", 0);
567 #endif
568 	ppc_md.progress(init_utsname()->version, 0);
569 
570 	return 0;
571 }
572 machine_arch_initcall(pseries, pSeries_init_panel);
573 
pseries_set_dabr(unsigned long dabr,unsigned long dabrx)574 static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx)
575 {
576 	return plpar_hcall_norets(H_SET_DABR, dabr);
577 }
578 
pseries_set_xdabr(unsigned long dabr,unsigned long dabrx)579 static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
580 {
581 	/* Have to set at least one bit in the DABRX according to PAPR */
582 	if (dabrx == 0 && dabr == 0)
583 		dabrx = DABRX_USER;
584 	/* PAPR says we can only set kernel and user bits */
585 	dabrx &= DABRX_KERNEL | DABRX_USER;
586 
587 	return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
588 }
589 
pseries_set_dawr(unsigned long dawr,unsigned long dawrx)590 static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx)
591 {
592 	/* PAPR says we can't set HYP */
593 	dawrx &= ~DAWRX_HYP;
594 
595 	return  plapr_set_watchpoint0(dawr, dawrx);
596 }
597 
598 #define CMO_CHARACTERISTICS_TOKEN 44
599 #define CMO_MAXLENGTH 1026
600 
pSeries_coalesce_init(void)601 void pSeries_coalesce_init(void)
602 {
603 	struct hvcall_mpp_x_data mpp_x_data;
604 
605 	if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data))
606 		powerpc_firmware_features |= FW_FEATURE_XCMO;
607 	else
608 		powerpc_firmware_features &= ~FW_FEATURE_XCMO;
609 }
610 
611 /**
612  * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
613  * handle that here. (Stolen from parse_system_parameter_string)
614  */
pSeries_cmo_feature_init(void)615 static void pSeries_cmo_feature_init(void)
616 {
617 	char *ptr, *key, *value, *end;
618 	int call_status;
619 	int page_order = IOMMU_PAGE_SHIFT_4K;
620 
621 	pr_debug(" -> fw_cmo_feature_init()\n");
622 	spin_lock(&rtas_data_buf_lock);
623 	memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
624 	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
625 				NULL,
626 				CMO_CHARACTERISTICS_TOKEN,
627 				__pa(rtas_data_buf),
628 				RTAS_DATA_BUF_SIZE);
629 
630 	if (call_status != 0) {
631 		spin_unlock(&rtas_data_buf_lock);
632 		pr_debug("CMO not available\n");
633 		pr_debug(" <- fw_cmo_feature_init()\n");
634 		return;
635 	}
636 
637 	end = rtas_data_buf + CMO_MAXLENGTH - 2;
638 	ptr = rtas_data_buf + 2;	/* step over strlen value */
639 	key = value = ptr;
640 
641 	while (*ptr && (ptr <= end)) {
642 		/* Separate the key and value by replacing '=' with '\0' and
643 		 * point the value at the string after the '='
644 		 */
645 		if (ptr[0] == '=') {
646 			ptr[0] = '\0';
647 			value = ptr + 1;
648 		} else if (ptr[0] == '\0' || ptr[0] == ',') {
649 			/* Terminate the string containing the key/value pair */
650 			ptr[0] = '\0';
651 
652 			if (key == value) {
653 				pr_debug("Malformed key/value pair\n");
654 				/* Never found a '=', end processing */
655 				break;
656 			}
657 
658 			if (0 == strcmp(key, "CMOPageSize"))
659 				page_order = simple_strtol(value, NULL, 10);
660 			else if (0 == strcmp(key, "PrPSP"))
661 				CMO_PrPSP = simple_strtol(value, NULL, 10);
662 			else if (0 == strcmp(key, "SecPSP"))
663 				CMO_SecPSP = simple_strtol(value, NULL, 10);
664 			value = key = ptr + 1;
665 		}
666 		ptr++;
667 	}
668 
669 	/* Page size is returned as the power of 2 of the page size,
670 	 * convert to the page size in bytes before returning
671 	 */
672 	CMO_PageSize = 1 << page_order;
673 	pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
674 
675 	if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
676 		pr_info("CMO enabled\n");
677 		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
678 		         CMO_SecPSP);
679 		powerpc_firmware_features |= FW_FEATURE_CMO;
680 		pSeries_coalesce_init();
681 	} else
682 		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
683 		         CMO_SecPSP);
684 	spin_unlock(&rtas_data_buf_lock);
685 	pr_debug(" <- fw_cmo_feature_init()\n");
686 }
687 
688 /*
689  * Early initialization.  Relocation is on but do not reference unbolted pages
690  */
pSeries_init_early(void)691 static void __init pSeries_init_early(void)
692 {
693 	pr_debug(" -> pSeries_init_early()\n");
694 
695 #ifdef CONFIG_HVC_CONSOLE
696 	if (firmware_has_feature(FW_FEATURE_LPAR))
697 		hvc_vio_init_early();
698 #endif
699 	if (firmware_has_feature(FW_FEATURE_XDABR))
700 		ppc_md.set_dabr = pseries_set_xdabr;
701 	else if (firmware_has_feature(FW_FEATURE_DABR))
702 		ppc_md.set_dabr = pseries_set_dabr;
703 
704 	if (firmware_has_feature(FW_FEATURE_SET_MODE))
705 		ppc_md.set_dawr = pseries_set_dawr;
706 
707 	pSeries_cmo_feature_init();
708 	iommu_init_early_pSeries();
709 
710 	pr_debug(" <- pSeries_init_early()\n");
711 }
712 
713 /**
714  * pseries_power_off - tell firmware about how to power off the system.
715  *
716  * This function calls either the power-off rtas token in normal cases
717  * or the ibm,power-off-ups token (if present & requested) in case of
718  * a power failure. If power-off token is used, power on will only be
719  * possible with power button press. If ibm,power-off-ups token is used
720  * it will allow auto poweron after power is restored.
721  */
pseries_power_off(void)722 static void pseries_power_off(void)
723 {
724 	int rc;
725 	int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
726 
727 	if (rtas_flash_term_hook)
728 		rtas_flash_term_hook(SYS_POWER_OFF);
729 
730 	if (rtas_poweron_auto == 0 ||
731 		rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) {
732 		rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1);
733 		printk(KERN_INFO "RTAS power-off returned %d\n", rc);
734 	} else {
735 		rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL);
736 		printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
737 	}
738 	for (;;);
739 }
740 
741 /*
742  * Called very early, MMU is off, device-tree isn't unflattened
743  */
744 
pseries_probe_fw_features(unsigned long node,const char * uname,int depth,void * data)745 static int __init pseries_probe_fw_features(unsigned long node,
746 					    const char *uname, int depth,
747 					    void *data)
748 {
749 	const char *prop;
750 	int len;
751 	static int hypertas_found;
752 	static int vec5_found;
753 
754 	if (depth != 1)
755 		return 0;
756 
757 	if (!strcmp(uname, "rtas") || !strcmp(uname, "rtas@0")) {
758 		prop = of_get_flat_dt_prop(node, "ibm,hypertas-functions",
759 					   &len);
760 		if (prop) {
761 			powerpc_firmware_features |= FW_FEATURE_LPAR;
762 			fw_hypertas_feature_init(prop, len);
763 		}
764 
765 		hypertas_found = 1;
766 	}
767 
768 	if (!strcmp(uname, "chosen")) {
769 		prop = of_get_flat_dt_prop(node, "ibm,architecture-vec-5",
770 					   &len);
771 		if (prop)
772 			fw_vec5_feature_init(prop, len);
773 
774 		vec5_found = 1;
775 	}
776 
777 	return hypertas_found && vec5_found;
778 }
779 
pSeries_probe(void)780 static int __init pSeries_probe(void)
781 {
782 	unsigned long root = of_get_flat_dt_root();
783 	const char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
784 
785  	if (dtype == NULL)
786  		return 0;
787  	if (strcmp(dtype, "chrp"))
788 		return 0;
789 
790 	/* Cell blades firmware claims to be chrp while it's not. Until this
791 	 * is fixed, we need to avoid those here.
792 	 */
793 	if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0") ||
794 	    of_flat_dt_is_compatible(root, "IBM,CBEA"))
795 		return 0;
796 
797 	pr_debug("pSeries detected, looking for LPAR capability...\n");
798 
799 	/* Now try to figure out if we are running on LPAR */
800 	of_scan_flat_dt(pseries_probe_fw_features, NULL);
801 
802 #ifdef __LITTLE_ENDIAN__
803 	if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
804 		long rc;
805 		/*
806 		 * Tell the hypervisor that we want our exceptions to
807 		 * be taken in little endian mode. If this fails we don't
808 		 * want to use BUG() because it will trigger an exception.
809 		 */
810 		rc = pseries_little_endian_exceptions();
811 		if (rc) {
812 			ppc_md.progress("H_SET_MODE LE exception fail", 0);
813 			panic("Could not enable little endian exceptions");
814 		}
815 	}
816 #endif
817 
818 	if (firmware_has_feature(FW_FEATURE_LPAR))
819 		hpte_init_lpar();
820 	else
821 		hpte_init_native();
822 
823 	pm_power_off = pseries_power_off;
824 
825 	pr_debug("Machine is%s LPAR !\n",
826 	         (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
827 
828 	return 1;
829 }
830 
pSeries_pci_probe_mode(struct pci_bus * bus)831 static int pSeries_pci_probe_mode(struct pci_bus *bus)
832 {
833 	if (firmware_has_feature(FW_FEATURE_LPAR))
834 		return PCI_PROBE_DEVTREE;
835 	return PCI_PROBE_NORMAL;
836 }
837 
838 #ifndef CONFIG_PCI
pSeries_final_fixup(void)839 void pSeries_final_fixup(void) { }
840 #endif
841 
842 struct pci_controller_ops pseries_pci_controller_ops = {
843 	.probe_mode		= pSeries_pci_probe_mode,
844 };
845 
define_machine(pseries)846 define_machine(pseries) {
847 	.name			= "pSeries",
848 	.probe			= pSeries_probe,
849 	.setup_arch		= pSeries_setup_arch,
850 	.init_early		= pSeries_init_early,
851 	.show_cpuinfo		= pSeries_show_cpuinfo,
852 	.log_error		= pSeries_log_error,
853 	.pcibios_fixup		= pSeries_final_fixup,
854 	.restart		= rtas_restart,
855 	.halt			= rtas_halt,
856 	.panic			= rtas_os_term,
857 	.get_boot_time		= rtas_get_boot_time,
858 	.get_rtc_time		= rtas_get_rtc_time,
859 	.set_rtc_time		= rtas_set_rtc_time,
860 	.calibrate_decr		= generic_calibrate_decr,
861 	.progress		= rtas_progress,
862 	.system_reset_exception = pSeries_system_reset_exception,
863 	.machine_check_exception = pSeries_machine_check_exception,
864 #ifdef CONFIG_KEXEC
865 	.machine_kexec          = pSeries_machine_kexec,
866 #endif
867 #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
868 	.memory_block_size	= pseries_memory_block_size,
869 #endif
870 };
871