ioctl VIDIOC_G_MODULATOR, VIDIOC_S

ioctl VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR
Prev	Appendix A. Function Reference	Next

Name

VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR — Get or set modulator attributes

Synopsis

`int ioctl(`	int `fd`,
	int `request`,
	struct v4l2_modulator *`argp)`;

`int ioctl(`	int `fd`,
	int `request`,
	const struct v4l2_modulator *`argp)`;

Arguments

fd: File descriptor returned by open().
request: VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR
argp

Description

To query the attributes of a modulator applications initialize the index field and zero out the reserved array of a struct v4l2_modulator and call the VIDIOC_G_MODULATOR ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the index is out of bounds. To enumerate all modulators applications shall begin at index zero, incrementing by one until the driver returns EINVAL.

Modulators have two writable properties, an audio modulation set and the radio frequency. To change the modulated audio subprograms, applications initialize the index and txsubchans fields and the reserved array and call the VIDIOC_S_MODULATOR ioctl. Drivers may choose a different audio modulation if the request cannot be satisfied. However this is a write-only ioctl, it does not return the actual audio modulation selected.

To change the radio frequency the VIDIOC_S_FREQUENCY ioctl is available.

Table A.76. struct v4l2_modulator

__u32	`index`	Identifies the modulator, set by the application.
__u8	`name`[32]	Name of the modulator, a NUL-terminated ASCII string. This information is intended for the user.
__u32	`capability`	Modulator capability flags. No flags are defined for this field, the tuner flags in struct v4l2_tuner are used accordingly. The audio flags indicate the ability to encode audio subprograms. They will not change for example with the current video standard.
__u32	`rangelow`	The lowest tunable frequency in units of 62.5 KHz, or if the `capability` flag `V4L2_TUNER_CAP_LOW` is set, in units of 62.5 Hz, or if the `capability` flag `V4L2_TUNER_CAP_1HZ` is set, in units of 1 Hz.
__u32	`rangehigh`	The highest tunable frequency in units of 62.5 KHz, or if the `capability` flag `V4L2_TUNER_CAP_LOW` is set, in units of 62.5 Hz, or if the `capability` flag `V4L2_TUNER_CAP_1HZ` is set, in units of 1 Hz.
__u32	`txsubchans`	With this field applications can determine how audio sub-carriers shall be modulated. It contains a set of flags as defined in Table A.77, “Modulator Audio Transmission Flags”. Note the tuner `rxsubchans` flags are reused, but the semantics are different. Video output devices are assumed to have an analog or PCM audio input with 1-3 channels. The `txsubchans` flags select one or more channels for modulation, together with some audio subprogram indicator, for example a stereo pilot tone.
__u32	`reserved`[4]	Reserved for future extensions. Drivers and applications must set the array to zero.

Table A.77. Modulator Audio Transmission Flags

`V4L2_TUNER_SUB_MONO`	0x0001	Modulate channel 1 as mono audio, when the input has more channels, a down-mix of channel 1 and 2. This flag does not combine with `V4L2_TUNER_SUB_STEREO` or `V4L2_TUNER_SUB_LANG1`.
`V4L2_TUNER_SUB_STEREO`	0x0002	Modulate channel 1 and 2 as left and right channel of a stereo audio signal. When the input has only one channel or two channels and `V4L2_TUNER_SUB_SAP` is also set, channel 1 is encoded as left and right channel. This flag does not combine with `V4L2_TUNER_SUB_MONO` or `V4L2_TUNER_SUB_LANG1`. When the driver does not support stereo audio it shall fall back to mono.
`V4L2_TUNER_SUB_LANG1`	0x0008	Modulate channel 1 and 2 as primary and secondary language of a bilingual audio signal. When the input has only one channel it is used for both languages. It is not possible to encode the primary or secondary language only. This flag does not combine with `V4L2_TUNER_SUB_MONO`, `V4L2_TUNER_SUB_STEREO` or `V4L2_TUNER_SUB_SAP`. If the hardware does not support the respective audio matrix, or the current video standard does not permit bilingual audio the `VIDIOC_S_MODULATOR` ioctl shall return an EINVAL error code and the driver shall fall back to mono or stereo mode.
`V4L2_TUNER_SUB_LANG2`	0x0004	Same effect as `V4L2_TUNER_SUB_SAP`.
`V4L2_TUNER_SUB_SAP`	0x0004	When combined with `V4L2_TUNER_SUB_MONO` the first channel is encoded as mono audio, the last channel as Second Audio Program. When the input has only one channel it is used for both audio tracks. When the input has three channels the mono track is a down-mix of channel 1 and 2. When combined with `V4L2_TUNER_SUB_STEREO` channel 1 and 2 are encoded as left and right stereo audio, channel 3 as Second Audio Program. When the input has only two channels, the first is encoded as left and right channel and the second as SAP. When the input has only one channel it is used for all audio tracks. It is not possible to encode a Second Audio Program only. This flag must combine with `V4L2_TUNER_SUB_MONO` or `V4L2_TUNER_SUB_STEREO`. If the hardware does not support the respective audio matrix, or the current video standard does not permit SAP the `VIDIOC_S_MODULATOR` ioctl shall return an EINVAL error code and driver shall fall back to mono or stereo mode.
`V4L2_TUNER_SUB_RDS`	0x0010	Enable the RDS encoder for a radio FM transmitter.

Return Value

On success 0 is returned, on error -1 and the errno variable is set appropriately. The generic error codes are described at the Generic Error Codes chapter.

EINVAL: The struct v4l2_modulator index is out of bounds.

Prev	Up	Next
ioctl VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP	Home	ioctl VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT