34 #define DRV_NAME	"enc28j60"  macro
111 		printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",  in spi_read_buf()
132 			printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",  in spi_write_buf()
157 		printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",  in spi_read_op()
177 		printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",  in spi_write_op()
185 		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);  in enc28j60_soft_reset()
374 			printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "  in enc28j60_mem_read()
396 			printk(KERN_DEBUG DRV_NAME  in enc28j60_packet_write()
406 		printk(KERN_DEBUG DRV_NAME  in enc28j60_packet_write()
412 		printk(KERN_DEBUG DRV_NAME  in enc28j60_packet_write()
496 			printk(KERN_INFO DRV_NAME  in enc28j60_set_hw_macaddr()
509 			printk(KERN_DEBUG DRV_NAME  in enc28j60_set_hw_macaddr()
540 	printk(KERN_DEBUG DRV_NAME " %s\n"  in enc28j60_dump_regs()
601 			printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "  in nolock_rxfifo_init()
617 			printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "  in nolock_txfifo_init()
657 		printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,  in enc28j60_hw_init()
684 		printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);  in enc28j60_hw_init()
687 			printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",  in enc28j60_hw_init()
750 		printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",  in enc28j60_hw_enable()
813 		printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",  in enc28j60_read_tsv()
823 	printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);  in enc28j60_dump_tsv()
832 	printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"  in enc28j60_dump_tsv()
834 	printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"  in enc28j60_dump_tsv()
839 	printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "  in enc28j60_dump_tsv()
845 	printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "  in enc28j60_dump_tsv()
850 	printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "  in enc28j60_dump_tsv()
864 	printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",  in enc28j60_dump_rsv()
866 	printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,  in enc28j60_dump_rsv()
868 	printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"  in enc28j60_dump_rsv()
873 	printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "  in enc28j60_dump_rsv()
879 	printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"  in enc28j60_dump_rsv()
889 	printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);  in dump_packet()
908 		printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",  in enc28j60_hw_rx()
985 		printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",  in enc28j60_hw_rx()
995 			printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "  in enc28j60_hw_rx()
1033 		printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",  in enc28j60_get_free_rxfifo()
1049 		printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "  in enc28j60_check_link_status()
1100 		printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);  in enc28j60_rx_interrupt()
1105 			printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",  in enc28j60_rx_interrupt()
1123 		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);  in enc28j60_irq_work_handler()
1134 				printk(KERN_DEBUG DRV_NAME  in enc28j60_irq_work_handler()
1142 				printk(KERN_DEBUG DRV_NAME  in enc28j60_irq_work_handler()
1153 				printk(KERN_DEBUG DRV_NAME  in enc28j60_irq_work_handler()
1176 				printk(KERN_DEBUG DRV_NAME  in enc28j60_irq_work_handler()
1191 					printk(KERN_DEBUG DRV_NAME  in enc28j60_irq_work_handler()
1207 				printk(KERN_DEBUG DRV_NAME  in enc28j60_irq_work_handler()
1212 					printk(KERN_DEBUG DRV_NAME  in enc28j60_irq_work_handler()
1226 		printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);  in enc28j60_irq_work_handler()
1237 		printk(KERN_DEBUG DRV_NAME  in enc28j60_hw_tx()
1261 				printk(KERN_DEBUG DRV_NAME  in enc28j60_hw_tx()
1269 			printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "  in enc28j60_hw_tx()
1283 		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);  in enc28j60_send_packet()
1332 		dev_err(&ndev->dev, DRV_NAME " tx timeout\n");  in enc28j60_tx_timeout()
1352 		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);  in enc28j60_net_open()
1388 		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);  in enc28j60_net_close()
1434 			printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");  in enc28j60_setrx_work_handler()
1438 			printk(KERN_DEBUG DRV_NAME ": multicast mode\n");  in enc28j60_setrx_work_handler()
1444 			printk(KERN_DEBUG DRV_NAME ": normal mode\n");  in enc28j60_setrx_work_handler()
1475 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));  in enc28j60_get_drvinfo()
1550 		dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",  in enc28j60_probe()
1574 			dev_info(&spi->dev, DRV_NAME " chip not found\n");  in enc28j60_probe()
1584 	ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);  in enc28j60_probe()
1587 			dev_err(&spi->dev, DRV_NAME ": request irq %d failed "  in enc28j60_probe()
1603 			dev_err(&spi->dev, "register netdev " DRV_NAME  in enc28j60_probe()
1607 	dev_info(&dev->dev, DRV_NAME " driver registered\n");  in enc28j60_probe()
1624 		printk(KERN_DEBUG DRV_NAME ": remove\n");  in enc28j60_remove()
1635 		   .name = DRV_NAME,
1657 MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1662 MODULE_ALIAS("spi:" DRV_NAME);