136 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_read_phy_reg_mdic()
162 		hw_dbg("MDI Read did not complete\n");  in igb_read_phy_reg_mdic()
167 		hw_dbg("MDI Error\n");  in igb_read_phy_reg_mdic()
192 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_write_phy_reg_mdic()
219 		hw_dbg("MDI Write did not complete\n");  in igb_write_phy_reg_mdic()
224 		hw_dbg("MDI Error\n");  in igb_write_phy_reg_mdic()
265 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_phy_reg_i2c()
269 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_phy_reg_i2c()
295 		hw_dbg("PHY I2C Address %d is out of range.\n",  in igb_write_phy_reg_i2c()
322 		hw_dbg("I2CCMD Write did not complete\n");  in igb_write_phy_reg_i2c()
326 		hw_dbg("I2CCMD Error bit set\n");  in igb_write_phy_reg_i2c()
353 		hw_dbg("I2CCMD command address exceeds upper limit\n");  in igb_read_sfp_data_byte()
374 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_sfp_data_byte()
378 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_sfp_data_byte()
485 			hw_dbg("Error resetting the PHY.\n");  in igb_copper_link_setup_82580()
627 		hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88()
704 			hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88_gen2()
720 		hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88_gen2()
750 		hw_dbg("Error resetting the PHY.\n");  in igb_copper_link_setup_igp()
767 			hw_dbg("Error Disabling LPLU D3\n");  in igb_copper_link_setup_igp()
775 		hw_dbg("Error Disabling LPLU D0\n");  in igb_copper_link_setup_igp()
892 	hw_dbg("Reconfiguring auto-neg advertisement params\n");  in igb_copper_link_autoneg()
895 		hw_dbg("Error Setting up Auto-Negotiation\n");  in igb_copper_link_autoneg()
898 	hw_dbg("Restarting Auto-Neg\n");  in igb_copper_link_autoneg()
918 			hw_dbg("Error while waiting for autoneg to complete\n");  in igb_copper_link_autoneg()
977 	hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);  in igb_phy_setup_autoneg()
981 		hw_dbg("Advertise 10mb Half duplex\n");  in igb_phy_setup_autoneg()
987 		hw_dbg("Advertise 10mb Full duplex\n");  in igb_phy_setup_autoneg()
993 		hw_dbg("Advertise 100mb Half duplex\n");  in igb_phy_setup_autoneg()
999 		hw_dbg("Advertise 100mb Full duplex\n");  in igb_phy_setup_autoneg()
1005 		hw_dbg("Advertise 1000mb Half duplex request denied!\n");  in igb_phy_setup_autoneg()
1009 		hw_dbg("Advertise 1000mb Full duplex\n");  in igb_phy_setup_autoneg()
1063 		hw_dbg("Flow control param set incorrectly\n");  in igb_phy_setup_autoneg()
1072 	hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);  in igb_phy_setup_autoneg()
1111 		hw_dbg("Forcing Speed and Duplex\n");  in igb_setup_copper_link()
1114 			hw_dbg("Error Forcing Speed and Duplex\n");  in igb_setup_copper_link()
1127 		hw_dbg("Valid link established!!!\n");  in igb_setup_copper_link()
1131 		hw_dbg("Unable to establish link!!!\n");  in igb_setup_copper_link()
1177 	hw_dbg("IGP PSCR: %X\n", phy_data);  in igb_phy_force_speed_duplex_igp()
1182 		hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");  in igb_phy_force_speed_duplex_igp()
1189 			hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_igp()
1234 		hw_dbg("M88E1000 PSCR: %X\n", phy_data);  in igb_phy_force_speed_duplex_m88()
1253 		hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");  in igb_phy_force_speed_duplex_m88()
1276 				hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_m88()
1370 		hw_dbg("Half Duplex\n");  in igb_phy_force_speed_duplex_setup()
1374 		hw_dbg("Full Duplex\n");  in igb_phy_force_speed_duplex_setup()
1382 		hw_dbg("Forcing 100mb\n");  in igb_phy_force_speed_duplex_setup()
1387 		hw_dbg("Forcing 10mb\n");  in igb_phy_force_speed_duplex_setup()
1915 		hw_dbg("Phy info is only valid for copper media\n");  in igb_get_phy_info_m88()
1925 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_m88()
1995 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_igp()
2121 	hw_dbg("Running IGP 3 PHY init script\n");  in igb_phy_init_script_igp3()
2270 		hw_dbg("Error committing the PHY changes\n");  in igb_initialize_M88E1512_phy()
2378 	hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);  in igb_phy_force_speed_duplex_82580()
2383 		hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");  in igb_phy_force_speed_duplex_82580()
2390 			hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_82580()
2423 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_82580()