81 #define DPRINTK(level, format, args...)  do { if (CONFIG_ATM_FORE200E_DEBUG >= (level)) \  macro
84 #define DPRINTK(level, format, args...)  do {} while (0)  macro
430 …DPRINTK(3, "PCI DVMA mapping: virt_addr = 0x%p, size = %d, direction = %d,  --> dma_addr = 0x%08x\…  in fore200e_pca_dma_map()
440     DPRINTK(3, "PCI DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d\n",  in fore200e_pca_dma_unmap()
450 …DPRINTK(3, "PCI DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direct…  in fore200e_pca_dma_sync_for_cpu()
458 …DPRINTK(3, "PCI DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direct…  in fore200e_pca_dma_sync_for_device()
507 	DPRINTK(2,"FIFO OUT full, device %d\n", fore200e->atm_dev->number);  in fore200e_pca_irq_check()
533     DPRINTK(2, "device %s being mapped in memory\n", fore200e->name);  in fore200e_pca_map()
542     DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base);  in fore200e_pca_map()
557     DPRINTK(2, "device %s being unmapped from memory\n", fore200e->name);  in fore200e_pca_unmap()
569     DPRINTK(2, "device %s being configured\n", fore200e->name);  in fore200e_pca_configure()
681 …DPRINTK(3, "SBUS DVMA mapping: virt_addr = 0x%p, size = %d, direction = %d --> dma_addr = 0x%08x\n…  in fore200e_sba_dma_map()
691 	DPRINTK(3, "SBUS DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d,\n",  in fore200e_sba_dma_unmap()
701 …DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direc…  in fore200e_sba_dma_sync_for_cpu()
710 …DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direc…  in fore200e_sba_dma_sync_for_device()
786 	DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base);  in fore200e_sba_map()
872 	DPRINTK(3, "TX COMPLETED: entry = %p [tail = %d], vc_map = %p, skb = %p\n",   in fore200e_tx_irq()
888 	    DPRINTK(1, "no ready vcc found for PDU sent on device %d\n",  in fore200e_tx_irq()
911 		DPRINTK(1, "vcc closed-then-re-opened; dropping PDU sent on device %d\n",  in fore200e_tx_irq()
1011 		DPRINTK(2, "supplying %d rx buffers to queue %d / %d, freebuf_count = %d\n",  in fore200e_supply()
1084 	DPRINTK(2, "unable to alloc new skb, rx PDU length = %d\n", pdu_len);  in fore200e_push_rpd()
1113     DPRINTK(3, "rx skb: len = %d, truesize = %d\n", skb->len, skb->truesize);  in fore200e_push_rpd()
1124 	DPRINTK(2, "receive buffers saturated for %d.%d.%d - PDU dropped\n",  in fore200e_push_rpd()
1198 	    DPRINTK(1, "no ready VC found for PDU received on %d.%d.%d\n",  in fore200e_rx_irq()
1211 		DPRINTK(2, "damaged PDU on %d.%d.%d\n",  in fore200e_rx_irq()
1255 	DPRINTK(3, "interrupt NOT triggered by device %d\n", fore200e->atm_dev->number);  in fore200e_interrupt()
1258     DPRINTK(3, "interrupt triggered by device %d\n", fore200e->atm_dev->number);  in fore200e_interrupt()
1279     DPRINTK(3, "tx tasklet scheduled for device %d\n", fore200e->atm_dev->number);  in fore200e_tx_tasklet()
1293     DPRINTK(3, "rx tasklet scheduled for device %d\n", fore200e->atm_dev->number);  in fore200e_rx_tasklet()
1308     DPRINTK(1, "VC %d.%d.%d uses buffer scheme %d\n",  in fore200e_select_scheme()
1371     DPRINTK(1, "VC %d.%d.%d %sed\n", vcc->itf, vcc->vpi, vcc->vci,   in fore200e_activate_vcin()
1432     DPRINTK(2, "opening %d.%d.%d:%d QoS = (tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; "  in fore200e_open()
1485 	DPRINTK(3, "tx on %d.%d.%d:%d, tx PCR = %d, rx PCR = %d, data_cells = %u, idle_cells = %u\n",  in fore200e_open()
1517 …DPRINTK(2, "closing %d.%d.%d:%d\n", vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.a…  in fore200e_close()
1580 	DPRINTK(1, "VC %d.%d.%d not ready for tx\n", vcc->itf, vcc->vpi, vcc->vpi);  in fore200e_send()
1591 	DPRINTK(3, "user-supplied cell header = 0x%08x\n", *cell_header);  in fore200e_send()
1602 	DPRINTK(2, "misaligned tx PDU on device %s\n", fore200e->name);  in fore200e_send()
1610 	DPRINTK(2, "incomplete tx AAL0 PDU on device %s\n", fore200e->name);  in fore200e_send()
1662 	    DPRINTK(2, "tx queue of device %s is saturated, PDU dropped - heartbeat is %08x\n",  in fore200e_send()
1694     DPRINTK(3, "tx on %d.%d.%d:%d, len = %u (%u)\n",   in fore200e_send()
1791     DPRINTK(2, "getsockopt %d.%d.%d, level = %d, optname = 0x%x, optval = 0x%p, optlen = %d\n",  in fore200e_getsockopt()
1803     DPRINTK(2, "setsockopt %d.%d.%d, level = %d, optname = 0x%x, optval = 0x%p, optlen = %d\n",  in fore200e_setsockopt()
1859     DPRINTK(2, "set OC-3 reg = 0x%02x, value = 0x%02x, mask = 0x%02x\n", reg, value, mask);  in fore200e_set_oc3()
1957     DPRINTK(2, "ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg);  in fore200e_ioctl()
1988 	DPRINTK(1, "VC %d.%d.%d not ready for QoS change\n", vcc->itf, vcc->vpi, vcc->vpi);  in fore200e_change_qos()
1992     DPRINTK(2, "change_qos %d.%d.%d, "  in fore200e_change_qos()
2096 	    DPRINTK(2, "rx buffers %d / %d are being allocated\n", scheme, magn);  in fore200e_alloc_rx_buf()
2155 	    DPRINTK(2, "buffer supply queue %d / %d is being initialized\n", scheme, magn);  in fore200e_init_bs_queue()
2213     DPRINTK(2, "receive queue is being initialized\n");  in fore200e_init_rx_queue()
2272     DPRINTK(2, "transmit queue is being initialized\n");  in fore200e_init_tx_queue()
2334     DPRINTK(2, "command queue is being initialized\n");  in fore200e_init_cmd_queue()
2388     DPRINTK(2, "device %s being initialized\n", fore200e->name);  in fore200e_initialize()
2519     DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n",  in fore200e_load_and_start_fw()
2530     DPRINTK(2, "device %s firmware being started\n", fore200e->name);  in fore200e_load_and_start_fw()
2560     DPRINTK(2, "device %s being registered\n", fore200e->name);  in fore200e_register()