Lines Matching refs:be

8 - compatible : shall be one of the following:
25 		All at91 specific clocks (clocks defined below) must be child
85 - #size-cells : shall be 0 (reg is used to encode clk id).
86 - #address-cells : shall be 1 (reg is used to encode clk id).
101 - #clock-cells : from common clock binding; shall be set to 0.
115 - #clock-cells : from common clock binding; shall be set to 0.
130 - #clock-cells : from common clock binding; shall be set to 0.
142 - #size-cells : shall be 0 (reg is used to encode clk id).
143 - #address-cells : shall be 1 (reg is used to encode clk id).
144 - interrupts : shall be set to PMC interrupt line.
146 - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
173 - interrupts : shall be set to "<0>".
190 - interrupts : shall be set to "<0>".
191 - #clock-cells : from common clock binding; shall be set to 0.
211 - interrupts : shall be set to "<0>".
212 - #clock-cells : from common clock binding; shall be set to 0.
226 - interrupts : shall be set to "<3>".
227 - #clock-cells : from common clock binding; shall be set to 0.
228 - clocks : shall be the master clock sources (see atmel datasheet) phandles.
250 - #size-cells : shall be 0 (reg is used to encode clk id).
251 - #address-cells : shall be 1 (reg is used to encode clk id).
252 - clocks : shall be the master clock phandle.
255 	* #clock-cells : from common clock binding; shall be set to 0.
285 - interrupts : shall be set to "<1>".
286 - #clock-cells : from common clock binding; shall be set to 0.
287 - clocks : shall be the main clock phandle.
295 				      range description. Sould be set to 2, 3
327 - #clock-cells : from common clock binding; shall be set to 0.
328 - clocks : shall be the plla clock phandle.
330 The pll divisor is equal to 2 and cannot be changed.
341 - #size-cells : shall be 0 (reg is used to encode clk id).
342 - #address-cells : shall be 1 (reg is used to encode clk id).
343 - clocks : shall be the programmable clock source phandles.
346 	* #clock-cells : from common clock binding; shall be set to 0.
349 	* interrupts : shall be set to "<(8 + id)>".
374 - #clock-cells : from common clock binding; shall be set to 0.
375 - clocks : shall be the smd clock source phandles.
386 - #size-cells : shall be 0 (reg is used to encode clk id).
387 - #address-cells : shall be 1 (reg is used to encode clk id).
389 	* #clock-cells : from common clock binding; shall be set to 0.
420 - #clock-cells : from common clock binding; shall be set to 0.
421 - clocks : shall be the smd clock source phandles.
444 - interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
445 - #clock-cells : from common clock binding; shall be set to 0.
446 - clocks : shall be the main clock source phandle.
458 - #clock-cells : from common clock binding; shall be set to 0.
459 - clocks : shall be the master clock source phandle.
469 - #size-cells : shall be 0 (reg is used to encode clk id).
470 - #address-cells : shall be 1 (reg is used to encode clk id).
471 - clocks : shall be the generated clock source phandles.
474 	* #clock-cells : from common clock binding; shall be set to 0.