240 	dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count,  in keyspan_write()
254 			dev_dbg(&port->dev, "%s - no output urb :(\n", __func__);  in keyspan_write()
258 		dev_dbg(&port->dev, "%s - endpoint %d flip %d\n",  in keyspan_write()
281 			dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err);  in keyspan_write()
303 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",  in usa26_indat_callback()
323 			dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);  in usa26_indat_callback()
348 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa26_indat_callback()
359 	dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]);  in usa2x_outdat_callback()
377 		dev_dbg(&port->dev, "%s - sending setup\n", __func__);  in usa26_outcont_callback()
396 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);  in usa26_instat_callback()
400 		dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);  in usa26_instat_callback()
408 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);  in usa26_instat_callback()
429 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa26_instat_callback()
455 			dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",  in usa28_indat_callback()
473 			dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n",  in usa28_indat_callback()
494 		dev_dbg(&port->dev, "%s - sending setup\n", __func__);  in usa28_outcont_callback()
514 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);  in usa28_instat_callback()
519 		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);  in usa28_instat_callback()
527 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);  in usa28_instat_callback()
548 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa28_instat_callback()
570 			dev_dbg(&port->dev, "%s - sending setup\n", __func__);  in usa49_glocont_callback()
594 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);  in usa49_instat_callback()
600 		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);  in usa49_instat_callback()
608 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",  in usa49_instat_callback()
630 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa49_instat_callback()
649 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",  in usa49_indat_callback()
687 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa49_indat_callback()
701 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);  in usa49wg_indat_callback()
713 			dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",  in usa49wg_indat_callback()
757 		dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa49wg_indat_callback()
777 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",  in usa90_indat_callback()
806 				dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);  in usa90_indat_callback()
833 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa90_indat_callback()
850 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);  in usa90_instat_callback()
854 		dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);  in usa90_instat_callback()
880 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa90_instat_callback()
894 		dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__);  in usa90_outcont_callback()
915 		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);  in usa67_instat_callback()
921 		dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);  in usa67_instat_callback()
931 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);  in usa67_instat_callback()
951 		dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);  in usa67_instat_callback()
967 			dev_dbg(&port->dev, "%s - sending setup\n", __func__);  in usa67_glocont_callback()
1046 			dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err);  in keyspan_open()
1129 	dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n",  in keyspan_fake_startup()
1135 		dev_dbg(&serial->dev->dev, "Firmware already loaded.  Quitting.\n");  in keyspan_fake_startup()
1195 	dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);  in keyspan_fake_startup()
1240 	dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint);  in keyspan_setup_urb()
1274 	dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n",  in keyspan_setup_urb()
1371 	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);  in keyspan_usa19_calc_baud()
1398 		dev_dbg(&port->dev, "%s - %d %02x %02x.\n",  in keyspan_usa19_calc_baud()
1411 	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);  in keyspan_usa19hs_calc_baud()
1434 		dev_dbg(&port->dev, "%s - %d %02x %02x.\n",  in keyspan_usa19hs_calc_baud()
1453 	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);  in keyspan_usa19w_calc_baud()
1512 	dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);  in keyspan_usa28_calc_baud()
1545 	dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate);  in keyspan_usa28_calc_baud()
1560 	dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port);  in keyspan_usa26_send_setup()
1571 		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);  in keyspan_usa26_send_setup()
1575 	dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));  in keyspan_usa26_send_setup()
1596 			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",  in keyspan_usa26_send_setup()
1691 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);  in keyspan_usa26_send_setup()
1714 		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);  in keyspan_usa28_send_setup()
1723 		dev_dbg(&port->dev, "%s already writing\n", __func__);  in keyspan_usa28_send_setup()
1734 		dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n",  in keyspan_usa28_send_setup()
1809 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__);  in keyspan_usa28_send_setup()
1837 		dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);  in keyspan_usa49_send_setup()
1841 	dev_dbg(&port->dev, "%s - endpoint %d (%d)\n",  in keyspan_usa49_send_setup()
1866 			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",  in keyspan_usa49_send_setup()
1986 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);  in keyspan_usa49_send_setup()
2010 		dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);  in keyspan_usa90_send_setup()
2019 		dev_dbg(&port->dev, "%s already writing\n", __func__);  in keyspan_usa90_send_setup()
2032 			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",  in keyspan_usa90_send_setup()
2117 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);  in keyspan_usa90_send_setup()
2143 		dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);  in keyspan_usa67_send_setup()
2168 			dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",  in keyspan_usa67_send_setup()
2260 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);  in keyspan_usa67_send_setup()
2340 			dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err);  in keyspan_startup()
2345 			dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err);  in keyspan_startup()