27       KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";
280 	printk (KERN_INFO "%s: %s, %pM, IRQ %d\n",  in rio_probe1()
283 		printk(KERN_INFO "tx_coalesce:\t%d packets\n",  in rio_probe1()
286 		printk(KERN_INFO  in rio_probe1()
291 		printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);  in rio_probe1()
500 		printk(KERN_INFO "Try to recover rx ring exhausted...\n");  in rio_timer()
511 					printk (KERN_INFO  in rio_timer()
538 	printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n",  in rio_tx_timeout()
900 				printk (KERN_INFO  in receive_packet()
932 			printk (KERN_INFO "%s: Link up\n", dev->name);  in rio_error()
952 			printk (KERN_INFO "%s: Link off\n", dev->name);  in rio_error()
1424 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");  in mii_get_media()
1428 			printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");  in mii_get_media()
1432 			printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");  in mii_get_media()
1436 			printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");  in mii_get_media()
1440 			printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");  in mii_get_media()
1444 			printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");  in mii_get_media()
1458 			printk (KERN_INFO "Operating at 1000 Mbps, ");  in mii_get_media()
1461 			printk (KERN_INFO "Operating at 100 Mbps, ");  in mii_get_media()
1464 			printk (KERN_INFO "Operating at 10 Mbps, ");  in mii_get_media()
1473 		printk(KERN_INFO "Enable Tx Flow Control\n");  in mii_get_media()
1475 		printk(KERN_INFO "Disable Tx Flow Control\n");  in mii_get_media()
1477 		printk(KERN_INFO "Enable Rx Flow Control\n");  in mii_get_media()
1479 		printk(KERN_INFO "Disable Rx Flow Control\n");  in mii_get_media()
1551 			printk (KERN_INFO "Manual 100 Mbps, ");  in mii_set_media()
1553 			printk (KERN_INFO "Manual 10 Mbps, ");  in mii_set_media()
1594 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");  in mii_get_media_pcs()
1597 			printk (KERN_INFO "Auto 1000 Mbps, half duplex\n");  in mii_get_media_pcs()
1610 		printk (KERN_INFO "Operating at 1000 Mbps, ");  in mii_get_media_pcs()
1618 		printk(KERN_INFO "Enable Tx Flow Control\n");  in mii_get_media_pcs()
1620 		printk(KERN_INFO "Disable Tx Flow Control\n");  in mii_get_media_pcs()
1622 		printk(KERN_INFO "Enable Rx Flow Control\n");  in mii_get_media_pcs()
1624 		printk(KERN_INFO "Disable Rx Flow Control\n");  in mii_get_media_pcs()
1667 			printk (KERN_INFO "Manual full duplex\n");  in mii_set_media_pcs()
1670 			printk (KERN_INFO "Manual half duplex\n");  in mii_set_media_pcs()