Lines Matching refs:DBG_QOS
602 PRINTD (DBG_QOS|DBG_FLOW, "make_rate b=%lu, c=%u, %s", br, c, in make_rate()
607 PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!"); in make_rate()
640 PRINTD (DBG_QOS, "A: p=%u, d=%u", pre, div); in make_rate()
664 PRINTD (DBG_QOS, "B: p=%u, d=%u", pre, div); in make_rate()
675 PRINTD (DBG_QOS, "C: p=%u, d=%u", pre, div); in make_rate()
679 PRINTD (DBG_QOS, "set_cr internal failure: d=%u p=%u", in make_rate()
687 PRINTD (DBG_QOS, "actual rate: %u", *actual); in make_rate()
697 PRINTD (DBG_QOS|DBG_FLOW, "make_rate_with_tolerance c=%u, %s, tol=%u", in make_rate_with_tolerance()
1530 PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal0"); in setup_idle_tx_channel()
1535 PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal34"); in setup_idle_tx_channel()
2046 PRINTD (DBG_FLOW|DBG_QOS, "check_max_sdu"); in check_max_sdu()
2051 PRINTD (DBG_QOS, "defaulting max_sdu"); in check_max_sdu()
2054 PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu"); in check_max_sdu()
2060 PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default"); in check_max_sdu()
2066 PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default"); in check_max_sdu()
2080 PRINTD (DBG_QOS, "luser gave min_pcr = ATM_MAX_PCR"); in atm_pcr_check()
2082 PRINTD (DBG_QOS, "luser gave negative min_pcr"); in atm_pcr_check()
2084 PRINTD (DBG_QOS, "pcr less than min_pcr"); in atm_pcr_check()
2090 PRINTD (DBG_QOS, "luser gave max_pcr = ATM_MAX_PCR"); in atm_pcr_check()
2092 PRINTD (DBG_QOS, "luser gave negative max_pcr"); in atm_pcr_check()
2094 PRINTD (DBG_QOS, "pcr greater than max_pcr"); in atm_pcr_check()
2097 PRINTD (DBG_QOS, "xBR(pcr) OK"); in atm_pcr_check()
2100 PRINTD (DBG_QOS, "pcr=%u, tp: min_pcr=%d, pcr=%d, max_pcr=%d", in atm_pcr_check()
2147 PRINTD (DBG_QOS|DBG_VCC, "AAL0"); in hrz_open()
2152 PRINTD (DBG_QOS|DBG_VCC, "AAL3/4"); in hrz_open()
2156 PRINTD (DBG_QOS|DBG_VCC, "AAL5"); in hrz_open()
2160 PRINTD (DBG_QOS|DBG_VCC, "Bad AAL!"); in hrz_open()
2198 PRINTD (DBG_QOS, "TX:"); in hrz_open()
2215 PRINTD (DBG_QOS, "TX max_sdu check failed"); in hrz_open()
2249 PRINTD (DBG_QOS, "snatching all remaining TX bandwidth"); in hrz_open()
2260 PRINTD (DBG_QOS, "could not make rate from TX PCR"); in hrz_open()
2266 PRINTD (DBG_QOS, "TX PCR failed consistency check"); in hrz_open()
2297 PRINTD (DBG_QOS, "snatching all remaining TX bandwidth"); in hrz_open()
2308 PRINTD (DBG_QOS, "could not make rate from TX SCR"); in hrz_open()
2314 PRINTD (DBG_QOS, "TX SCR failed consistency check"); in hrz_open()
2324 PRINTD (DBG_QOS, "shrinking bucket from %u to %u", in hrz_open()
2334 PRINTD (DBG_QOS, "unsupported TX traffic class"); in hrz_open()
2342 PRINTD (DBG_QOS, "RX:"); in hrz_open()
2352 PRINTD (DBG_QOS, "RX max_sdu check failed"); in hrz_open()
2372 PRINTD (DBG_QOS, "snatching all remaining RX bandwidth"); in hrz_open()
2381 PRINTD (DBG_QOS, "RX PCR failed consistency check"); in hrz_open()
2393 PRINTD (DBG_QOS, "snatching all remaining RX bandwidth"); in hrz_open()
2402 PRINTD (DBG_QOS, "RX SCR failed consistency check"); in hrz_open()
2409 PRINTD (DBG_QOS, "unsupported RX traffic class"); in hrz_open()
2418 PRINTD (DBG_QOS, "AAL not supported"); in hrz_open()
2435 PRINTD (DBG_QOS, "not enough TX PCR left"); in hrz_open()
2440 PRINTD (DBG_QOS, "not enough RX PCR left"); in hrz_open()
2448 PRINTD (DBG_QOS|DBG_VCC, "reserving %u TX PCR and %u RX PCR", in hrz_open()
2455 PRINTD (DBG_QOS|DBG_VCC, "insufficient cell rate resources"); in hrz_open()
2532 PRINTD (DBG_QOS|DBG_VCC, "releasing %u TX PCR and %u RX PCR", in hrz_close()