Lines Matching refs:temperature
25 inputs from thermal zone attributes (the current temperature and trip point
26 temperature) and throttle appropriate devices.
51 .get_temp: get the current temperature of the thermal zone.
58 .get_trip_temp: get the temperature above which the certain trip point
60 .set_emul_temp: set the emulation temperature which helps in debugging
61 different threshold temperature points.
172 |---temp: Current temperature
175 |---trip_point_[0-*]_temp: Trip point temperature
178 |---emul_temp: Emulated temperature set node
204 |---temp[1-*]_input: The current temperature of thermal zone [1-*]
222 Current temperature as reported by thermal zone (sensor).
242 The temperature above which trip point will be fired.
271 and can be set to a temperature (in millidegrees) to enable a
279 Interface to set the emulated temperature method in thermal zone
280 (sensor). After setting this temperature, the thermal zone may pass
281 this temperature to platform emulation function if registered or
282 cache it locally. This is useful in debugging different temperature
290 flooding this sysfs node with low temperature values.
373 THERMAL_DEV_FAULT}. Notification can be sent when the current temperature
380 of temperature of the thermal zone. Ideally, the thermal sensor drivers
383 temperature values.