Lines Matching refs:one
30 control one or more internal sensors.
35 Size: one cell nodes with only one sensor, and at least 1 on nodes
65 Size: one cell
69 Size: one cell
73 Size: one cell to specify minimum and maximum cooling state used
89 Size: one cell
93 Size: one cell
121 Size: one cell The contribution is a ratio of the sum
134 thermal zone node must contain, apart from its own properties, one sub-node
135 containing trip nodes and one sub-node containing all the zone cooling maps.
140 Size: one cell
144 Size: one cell
159 - coefficients: An array of integers (one signed cell) containing
161 Elem size: one cell the sensors listed in the thermal-sensors property.
196 The CPU thermal zone example below describes how to setup one thermal zone
197 using one single sensor as temperature source and many cooling devices and
414 In the example above, there is one bandgap IC which has the capability to
417 hotspots: one for CPU thermal zone, one for GPU thermal zone and the
430 (c) - Several sensors within one single thermal zone
432 The example below illustrates how to use more than one sensor within
433 one thermal zone.
480 In some cases, there is a need to use more than one sensor to extrapolate
501 The board thermal example below illustrates how to setup one thermal zone
594 sensors used to monitor different zones, one of them is composed by several sensors and