Lines Matching refs:its

109 - cooling-device:	A phandle of a cooling device with its specifier,
133 for describing a thermal zone, including its cooling device bindings. The
134 thermal zone node must contain, apart from its own properties, one sub-node
205 	 * capable CPU. The CPU node describes its four OPPs.
297 used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
300 the thermal zone 'cpu-thermal' using its cooling states
301 from its minimum to 4, when it reaches trip point 'cpu_alert0'
303 'cpu_alert1', but from 5 to its maximum state. The cpu@0 device is also
305 using all its cooling states at trip point 'cpu_alert1',
340 			/* each zone within the SoC may have its own trips */
354 			/* each zone within the SoC may have its own cooling */
367 			/* each zone within the SoC may have its own trips */
381 			/* each zone within the SoC may have its own cooling */
394 			/* each zone within the SoC may have its own trips */
408 			/* each zone within the SoC may have its own cooling */
426 may be uncorrelated, having its own dT/dt requirements, trips