Lines Matching refs:example

54 of heat dissipation). For example a fan's cooling states correspond to
60 For more examples of cooling devices, refer to the example sections below.
196 The CPU thermal zone example below describes how to setup one thermal zone
204 	 * Here is an example of describing a cooling device for a DVFS
296 In the example above, the ADC sensor (bandgap0) at address 0x0000ED00 is
302 at 90C, as an example of active cooling. The same cooling device is used at
312 The example below describes how to deploy several thermal zones based off a
414 In the example above, there is one bandgap IC which has the capability to
423 specifier as sensor ID. In the example, then, <bandgap 0> is used to
432 The example below illustrates how to use more than one sensor within
481 a thermal hotspot in the silicon. The above example illustrates this situation.
484 to determine the hotspot. Assuming this is the case for the above example,
501 The board thermal example below illustrates how to setup one thermal zone
593 The above example is a mix of previous examples, a sensor IP with several internal