Lines Matching refs:A
5 A thermal structure includes thermal zones and their components,
46 cooling. A typical passive cooling is a CPU that has dynamic voltage and
91 - hysteresis: A low hysteresis value on temperature property (above).
96 "active": A trip point to enable active cooling
97 "passive": A trip point to enable passive cooling
98 "hot": A trip point to notify emergency
109 - cooling-device: A phandle of a cooling device with its specifier,
114 - trip: A phandle of a trip point node within the same thermal
146 - thermal-sensors: A list of thermal sensor phandles and sensor specifier
151 - trips: A sub-node which is a container of only trip point nodes
154 - cooling-maps: A sub-node which is a container of only cooling device
163 is not specified. A simple linear polynomial is used:
231 * A simple fan controller which supports 10 speeds of operation
245 * A simple IC with a single bandgap temperature sensor.
297 used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
323 * A simple IC with several bandgap temperature sensors.
440 * A simple IC with a single temperature sensor.
451 * A simple IC with a single bandgap temperature sensor.