Lines Matching refs:nand
6 marvell,pxa3xx-nand
7 marvell,armada370-nand
14 - marvell,nand-enable-arbiter: Set to enable the bus arbiter
15 - marvell,nand-keep-config: Set to keep the NAND controller config as set
18 - nand-on-flash-bbt: boolean to enable on flash bbt option if
20 - nand-ecc-strength: number of bits to correct per ECC step
21 - nand-ecc-step-size: number of data bytes covered by a single ECC step
25 - nand-ecc-strength = <1>, nand-ecc-step-size = <512>
26 - nand-ecc-strength = <4>, nand-ecc-step-size = <512>
27 - nand-ecc-strength = <8>, nand-ecc-step-size = <512>
31 nand0: nand@43100000 {
32 compatible = "marvell,pxa3xx-nand";
37 marvell,nand-enable-arbiter;
38 marvell,nand-keep-config;