Lines Matching refs:be
10 - #address-cells : should be <1>
11 - #size-cells : should be <0>
12 - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
16 - gpr : should be <&gpr> on i.MX53 and i.MX6q.
37 - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
41 be configured - one input will be distributed on both outputs in dual
52 - reg : should be <0> or <1>
56 limitations, only one input port (port@[0,1]) can be used for each channel
58 On i.MX6, there should be four input ports (port@[0-3]) that correspond
60 A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
61 to a panel input port. Optionally, the output port can be left out if
67 - fsl,data-mapping : should be "spwg" or "jeida"
70 - fsl,data-width : should be <18> or <24>