pscr              265 drivers/hwtracing/coresight/coresight-tmc.c coresight_tmc_reg(pscr, TMC_PSCR);
pscr             1587 drivers/net/ethernet/dlink/dl2k.c 	__u16 pscr;
pscr             1618 drivers/net/ethernet/dlink/dl2k.c 		pscr = mii_read (dev, phy_addr, MII_PHY_SCR);
pscr             1619 drivers/net/ethernet/dlink/dl2k.c 		pscr |= 3 << 5;	/* 11'b */
pscr             1620 drivers/net/ethernet/dlink/dl2k.c 		mii_write (dev, phy_addr, MII_PHY_SCR, pscr);
pscr             1630 drivers/net/ethernet/dlink/dl2k.c 		pscr = mii_read (dev, phy_addr, MII_PHY_SCR);
pscr             1631 drivers/net/ethernet/dlink/dl2k.c 		pscr &= ~(3 << 5);
pscr             1632 drivers/net/ethernet/dlink/dl2k.c 		mii_write (dev, phy_addr, MII_PHY_SCR, pscr);
pscr             1217 drivers/net/ethernet/marvell/mv643xx_eth.c 	u32 pscr = rdlp(mp, PORT_SERIAL_CONTROL);
pscr             1225 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr &= ~autoneg_disable;
pscr             1229 drivers/net/ethernet/marvell/mv643xx_eth.c 	pscr |= autoneg_disable;
pscr             1233 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr |= SET_GMII_SPEED_TO_1000;
pscr             1234 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr |= SET_FULL_DUPLEX_MODE;
pscr             1238 drivers/net/ethernet/marvell/mv643xx_eth.c 	pscr &= ~SET_GMII_SPEED_TO_1000;
pscr             1241 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr |= SET_MII_SPEED_TO_100;
pscr             1243 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr &= ~SET_MII_SPEED_TO_100;
pscr             1246 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr |= SET_FULL_DUPLEX_MODE;
pscr             1248 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr &= ~SET_FULL_DUPLEX_MODE;
pscr             1251 drivers/net/ethernet/marvell/mv643xx_eth.c 	wrlp(mp, PORT_SERIAL_CONTROL, pscr);
pscr             2315 drivers/net/ethernet/marvell/mv643xx_eth.c 	u32 pscr;
pscr             2334 drivers/net/ethernet/marvell/mv643xx_eth.c 	pscr = rdlp(mp, PORT_SERIAL_CONTROL);
pscr             2336 drivers/net/ethernet/marvell/mv643xx_eth.c 	pscr |= SERIAL_PORT_ENABLE;
pscr             2337 drivers/net/ethernet/marvell/mv643xx_eth.c 	wrlp(mp, PORT_SERIAL_CONTROL, pscr);
pscr             2339 drivers/net/ethernet/marvell/mv643xx_eth.c 	pscr |= DO_NOT_FORCE_LINK_FAIL;
pscr             2341 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr |= FORCE_LINK_PASS;
pscr             2342 drivers/net/ethernet/marvell/mv643xx_eth.c 	wrlp(mp, PORT_SERIAL_CONTROL, pscr);
pscr             3035 drivers/net/ethernet/marvell/mv643xx_eth.c 	u32 pscr;
pscr             3037 drivers/net/ethernet/marvell/mv643xx_eth.c 	pscr = rdlp(mp, PORT_SERIAL_CONTROL);
pscr             3038 drivers/net/ethernet/marvell/mv643xx_eth.c 	if (pscr & SERIAL_PORT_ENABLE) {
pscr             3039 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr &= ~SERIAL_PORT_ENABLE;
pscr             3040 drivers/net/ethernet/marvell/mv643xx_eth.c 		wrlp(mp, PORT_SERIAL_CONTROL, pscr);
pscr             3043 drivers/net/ethernet/marvell/mv643xx_eth.c 	pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED;
pscr             3045 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr |= DISABLE_AUTO_NEG_SPEED_GMII;
pscr             3047 drivers/net/ethernet/marvell/mv643xx_eth.c 			pscr |= SET_GMII_SPEED_TO_1000;
pscr             3049 drivers/net/ethernet/marvell/mv643xx_eth.c 			pscr |= SET_MII_SPEED_TO_100;
pscr             3051 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL;
pscr             3053 drivers/net/ethernet/marvell/mv643xx_eth.c 		pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX;
pscr             3055 drivers/net/ethernet/marvell/mv643xx_eth.c 			pscr |= SET_FULL_DUPLEX_MODE;
pscr             3058 drivers/net/ethernet/marvell/mv643xx_eth.c 	wrlp(mp, PORT_SERIAL_CONTROL, pscr);