ifcfg 3549 drivers/ata/sata_mv.c u32 ifcfg = readl(port_mmio + SATA_IFCFG); ifcfg 3551 drivers/ata/sata_mv.c ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */ ifcfg 3553 drivers/ata/sata_mv.c ifcfg |= (1 << 7); /* enable gen2i speed */ ifcfg 3554 drivers/ata/sata_mv.c writelfl(ifcfg, port_mmio + SATA_IFCFG); ifcfg 284 drivers/scsi/arm/arxescsi.c info->info.ifcfg.clockrate = 24; /* MHz */ ifcfg 285 drivers/scsi/arm/arxescsi.c info->info.ifcfg.select_timeout = 255; ifcfg 286 drivers/scsi/arm/arxescsi.c info->info.ifcfg.asyncperiod = 200; /* ns */ ifcfg 287 drivers/scsi/arm/arxescsi.c info->info.ifcfg.sync_max_depth = 0; ifcfg 288 drivers/scsi/arm/arxescsi.c info->info.ifcfg.cntl3 = CNTL3_FASTSCSI | CNTL3_FASTCLK; ifcfg 289 drivers/scsi/arm/arxescsi.c info->info.ifcfg.disconnect_ok = 0; ifcfg 290 drivers/scsi/arm/arxescsi.c info->info.ifcfg.wide_max_size = 0; ifcfg 291 drivers/scsi/arm/arxescsi.c info->info.ifcfg.capabilities = FASCAP_PSEUDODMA; ifcfg 407 drivers/scsi/arm/cumana_2.c info->info.ifcfg.clockrate = 40; /* MHz */ ifcfg 408 drivers/scsi/arm/cumana_2.c info->info.ifcfg.select_timeout = 255; ifcfg 409 drivers/scsi/arm/cumana_2.c info->info.ifcfg.asyncperiod = 200; /* ns */ ifcfg 410 drivers/scsi/arm/cumana_2.c info->info.ifcfg.sync_max_depth = 7; ifcfg 411 drivers/scsi/arm/cumana_2.c info->info.ifcfg.cntl3 = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK; ifcfg 412 drivers/scsi/arm/cumana_2.c info->info.ifcfg.disconnect_ok = 1; ifcfg 413 drivers/scsi/arm/cumana_2.c info->info.ifcfg.wide_max_size = 0; ifcfg 414 drivers/scsi/arm/cumana_2.c info->info.ifcfg.capabilities = FASCAP_PSEUDODMA; ifcfg 443 drivers/scsi/arm/cumana_2.c info->info.ifcfg.capabilities |= FASCAP_DMA; ifcfg 526 drivers/scsi/arm/eesox.c info->info.ifcfg.clockrate = 40; /* MHz */ ifcfg 527 drivers/scsi/arm/eesox.c info->info.ifcfg.select_timeout = 255; ifcfg 528 drivers/scsi/arm/eesox.c info->info.ifcfg.asyncperiod = 200; /* ns */ ifcfg 529 drivers/scsi/arm/eesox.c info->info.ifcfg.sync_max_depth = 7; ifcfg 530 drivers/scsi/arm/eesox.c info->info.ifcfg.cntl3 = CNTL3_FASTSCSI | CNTL3_FASTCLK; ifcfg 531 drivers/scsi/arm/eesox.c info->info.ifcfg.disconnect_ok = 1; ifcfg 532 drivers/scsi/arm/eesox.c info->info.ifcfg.wide_max_size = 0; ifcfg 533 drivers/scsi/arm/eesox.c info->info.ifcfg.capabilities = FASCAP_PSEUDODMA; ifcfg 563 drivers/scsi/arm/eesox.c info->info.ifcfg.capabilities |= FASCAP_DMA; ifcfg 564 drivers/scsi/arm/eesox.c info->info.ifcfg.cntl3 |= CNTL3_BS8; ifcfg 211 drivers/scsi/arm/fas216.c info->ifcfg.clockrate, info->ifcfg.select_timeout, ifcfg 212 drivers/scsi/arm/fas216.c info->ifcfg.asyncperiod, info->ifcfg.sync_max_depth); ifcfg 446 drivers/scsi/arm/fas216.c int value = (info->ifcfg.clockrate * ns) / 1000; ifcfg 555 drivers/scsi/arm/fas216.c if (msg[4] > info->ifcfg.sync_max_depth) ifcfg 556 drivers/scsi/arm/fas216.c msg[4] = info->ifcfg.sync_max_depth; ifcfg 557 drivers/scsi/arm/fas216.c if (msg[3] < 1000 / info->ifcfg.clockrate) ifcfg 558 drivers/scsi/arm/fas216.c msg[3] = 1000 / info->ifcfg.clockrate; ifcfg 581 drivers/scsi/arm/fas216.c if (msg[4] <= info->ifcfg.sync_max_depth && ifcfg 582 drivers/scsi/arm/fas216.c msg[3] >= 1000 / info->ifcfg.clockrate) { ifcfg 609 drivers/scsi/arm/fas216.c dev->period = info->ifcfg.asyncperiod / 4; ifcfg 1603 drivers/scsi/arm/fas216.c if (info->ifcfg.capabilities & (FASCAP_DMA|FASCAP_PSEUDODMA)) ifcfg 1612 drivers/scsi/arm/fas216.c info->device[i].disconnect_ok = info->ifcfg.disconnect_ok; ifcfg 1614 drivers/scsi/arm/fas216.c info->device[i].period = info->ifcfg.asyncperiod / 4; ifcfg 1682 drivers/scsi/arm/fas216.c fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout); ifcfg 1805 drivers/scsi/arm/fas216.c 1000 / info->ifcfg.clockrate, ifcfg 1806 drivers/scsi/arm/fas216.c info->ifcfg.sync_max_depth); ifcfg 1877 drivers/scsi/arm/fas216.c fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout); ifcfg 2639 drivers/scsi/arm/fas216.c unsigned int clock = ((info->ifcfg.clockrate - 1) / 5 + 1) & 7; ifcfg 2644 drivers/scsi/arm/fas216.c fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout); ifcfg 2850 drivers/scsi/arm/fas216.c info->scsi.cfg[2] = info->ifcfg.cntl3 | ifcfg 2852 drivers/scsi/arm/fas216.c info->scsi.async_stp = fas216_syncperiod(info, info->ifcfg.asyncperiod); ifcfg 2889 drivers/scsi/arm/fas216.c if (info->ifcfg.clockrate <= 10 || info->ifcfg.clockrate > 40) { ifcfg 2891 drivers/scsi/arm/fas216.c info->ifcfg.clockrate); ifcfg 277 drivers/scsi/arm/fas216.h } ifcfg; ifcfg 135 drivers/scsi/arm/powertec.c if (info->info.ifcfg.capabilities & FASCAP_DMA && ifcfg 333 drivers/scsi/arm/powertec.c info->info.ifcfg.clockrate = 40; /* MHz */ ifcfg 334 drivers/scsi/arm/powertec.c info->info.ifcfg.select_timeout = 255; ifcfg 335 drivers/scsi/arm/powertec.c info->info.ifcfg.asyncperiod = 200; /* ns */ ifcfg 336 drivers/scsi/arm/powertec.c info->info.ifcfg.sync_max_depth = 7; ifcfg 337 drivers/scsi/arm/powertec.c info->info.ifcfg.cntl3 = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK; ifcfg 338 drivers/scsi/arm/powertec.c info->info.ifcfg.disconnect_ok = 1; ifcfg 339 drivers/scsi/arm/powertec.c info->info.ifcfg.wide_max_size = 0; ifcfg 340 drivers/scsi/arm/powertec.c info->info.ifcfg.capabilities = 0; ifcfg 371 drivers/scsi/arm/powertec.c info->info.ifcfg.capabilities |= FASCAP_DMA;