csr2              172 drivers/media/pci/dt3155/dt3155.c 	write_i2c_reg(pd->regs, CSR2, pd->csr2 | BUSY_EVEN | BUSY_ODD);
csr2              183 drivers/media/pci/dt3155/dt3155.c 	write_i2c_reg_nowait(pd->regs, CSR2, pd->csr2);
csr2              344 drivers/media/pci/dt3155/dt3155.c 		pd->csr2 = VT_60HZ;
csr2              348 drivers/media/pci/dt3155/dt3155.c 		pd->csr2 = VT_50HZ;
csr2              513 drivers/media/pci/dt3155/dt3155.c 	pd->csr2 = VT_50HZ;
csr2              184 drivers/media/pci/dt3155/dt3155.h 	u8 csr2, config;
csr2             1020 drivers/usb/gadget/udc/s3c2410_udc.c 	u32			csr1, csr2;
csr2             1049 drivers/usb/gadget/udc/s3c2410_udc.c 		csr2 = S3C2410_UDC_ICSR2_MODEIN|S3C2410_UDC_ICSR2_DMAIEN;
csr2             1054 drivers/usb/gadget/udc/s3c2410_udc.c 		udc_write(csr2, S3C2410_UDC_IN_CSR2_REG);
csr2             1058 drivers/usb/gadget/udc/s3c2410_udc.c 		csr2 = S3C2410_UDC_ICSR2_DMAIEN;
csr2             1063 drivers/usb/gadget/udc/s3c2410_udc.c 		udc_write(csr2, S3C2410_UDC_IN_CSR2_REG);
csr2             1066 drivers/usb/gadget/udc/s3c2410_udc.c 		csr2 = S3C2410_UDC_OCSR2_DMAIEN;
csr2             1071 drivers/usb/gadget/udc/s3c2410_udc.c 		udc_write(csr2, S3C2410_UDC_OUT_CSR2_REG);
csr2              307 drivers/usb/mtu3/mtu3_core.c 	u32 csr0, csr1, csr2;
csr2              328 drivers/usb/mtu3/mtu3_core.c 		csr2 = TX_FIFOADDR(fifo_addr >> 4);
csr2              329 drivers/usb/mtu3/mtu3_core.c 		csr2 |= TX_FIFOSEGSIZE(fifo_sgsz);
csr2              337 drivers/usb/mtu3/mtu3_core.c 			csr2 |= TX_BINTERVAL(interval);
csr2              341 drivers/usb/mtu3/mtu3_core.c 			csr2 |= TX_BINTERVAL(interval);
csr2              350 drivers/usb/mtu3/mtu3_core.c 		mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), csr2);
csr2              364 drivers/usb/mtu3/mtu3_core.c 		csr2 = RX_FIFOADDR(fifo_addr >> 4);
csr2              365 drivers/usb/mtu3/mtu3_core.c 		csr2 |= RX_FIFOSEGSIZE(fifo_sgsz);
csr2              373 drivers/usb/mtu3/mtu3_core.c 			csr2 |= RX_BINTERVAL(interval);
csr2              377 drivers/usb/mtu3/mtu3_core.c 			csr2 |= RX_BINTERVAL(interval);
csr2              386 drivers/usb/mtu3/mtu3_core.c 		mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), csr2);
csr2              394 drivers/usb/mtu3/mtu3_core.c 	dev_dbg(mtu->dev, "csr0:%#x, csr1:%#x, csr2:%#x\n", csr0, csr1, csr2);