baudrate 666 drivers/bluetooth/btmtkuart.c __le32 baudrate; baudrate 673 drivers/bluetooth/btmtkuart.c baudrate = cpu_to_le32(bdev->desired_speed); baudrate 677 drivers/bluetooth/btmtkuart.c wmt_params.data = &baudrate; baudrate 381 drivers/bluetooth/btqca.c int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, baudrate 391 drivers/bluetooth/btqca.c config.user_baud_rate = baudrate; baudrate 134 drivers/bluetooth/btqca.h int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, baudrate 151 drivers/bluetooth/btqca.h static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, baudrate 998 drivers/bluetooth/hci_qca.c static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate) baudrate 1005 drivers/bluetooth/hci_qca.c if (baudrate > QCA_BAUDRATE_3200000) baudrate 1008 drivers/bluetooth/hci_qca.c cmd[4] = baudrate; baudrate 99 drivers/net/hamradio/yam.c int baudrate; baudrate 463 drivers/net/hamradio/yam.c int divisor = 115200 / yp->baudrate; baudrate 805 drivers/net/hamradio/yam.c seq_printf(seq, " BaudRate %u\n", yp->baudrate); baudrate 998 drivers/net/hamradio/yam.c if (yi.cfg.baudrate > YAM_MAXBAUDRATE) baudrate 1000 drivers/net/hamradio/yam.c yp->baudrate = yi.cfg.baudrate; baudrate 1041 drivers/net/hamradio/yam.c yi.cfg.baudrate = yp->baudrate; baudrate 1087 drivers/net/hamradio/yam.c yp->baudrate = DEFAULT_BITRATE * 2; baudrate 204 drivers/nfc/nfcmrvl/fw_dnld.c &priv->fw_dnld.binary_config->uart.baudrate, baudrate 40 drivers/nfc/nfcmrvl/fw_dnld.h uint32_t baudrate; baudrate 59 drivers/nfc/nfcmrvl/uart.c nci_uart_set_config(nu, le32_to_cpu(config->baudrate), baudrate 209 drivers/tty/mxser.c long baudrate[32]; baudrate 1610 drivers/tty/mxser.c me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); baudrate 1614 drivers/tty/mxser.c me->baudrate[p] = tty_get_baud_rate(tty); baudrate 2693 drivers/tty/serial/amba-pl011.c int baudrate; baudrate 2702 drivers/tty/serial/amba-pl011.c ret = of_property_read_u32(np, "current-speed", &baudrate); baudrate 2706 drivers/tty/serial/amba-pl011.c baudrate = 115200; baudrate 2735 drivers/tty/serial/amba-pl011.c uap->fixed_baud = baudrate; baudrate 1783 drivers/tty/serial/fsl_lpuart.c lpuart32_serial_setbrg(struct lpuart_port *sport, unsigned int baudrate) baudrate 1797 drivers/tty/serial/fsl_lpuart.c baud_diff = baudrate; baudrate 1803 drivers/tty/serial/fsl_lpuart.c tmp_sbr = (clk / (baudrate * tmp_osr)); baudrate 1811 drivers/tty/serial/fsl_lpuart.c tmp_diff = clk / (tmp_osr * tmp_sbr) - baudrate; baudrate 1815 drivers/tty/serial/fsl_lpuart.c if (tmp_diff > (baudrate - tmp)) { baudrate 1816 drivers/tty/serial/fsl_lpuart.c tmp_diff = baudrate - tmp; baudrate 1831 drivers/tty/serial/fsl_lpuart.c if (baud_diff > ((baudrate / 100) * 3)) baudrate 79 drivers/usb/serial/f81232.c static int calc_baud_divisor(speed_t baudrate, speed_t clockrate) baudrate 81 drivers/usb/serial/f81232.c if (!baudrate) baudrate 84 drivers/usb/serial/f81232.c return DIV_ROUND_CLOSEST(clockrate, baudrate); baudrate 400 drivers/usb/serial/f81232.c static int f81232_find_clk(speed_t baudrate) baudrate 405 drivers/usb/serial/f81232.c if (baudrate <= baudrate_table[idx] && baudrate 406 drivers/usb/serial/f81232.c baudrate_table[idx] % baudrate == 0) baudrate 414 drivers/usb/serial/f81232.c struct usb_serial_port *port, speed_t baudrate, baudrate 423 drivers/usb/serial/f81232.c speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE }; baudrate 428 drivers/usb/serial/f81232.c baudrate = baud_list[i]; baudrate 429 drivers/usb/serial/f81232.c tty_encode_baud_rate(tty, baudrate, baudrate); baudrate 438 drivers/usb/serial/f81232.c divisor = calc_baud_divisor(baudrate, priv->baud_base); baudrate 536 drivers/usb/serial/f81232.c speed_t baudrate; baudrate 548 drivers/usb/serial/f81232.c baudrate = tty_get_baud_rate(tty); baudrate 549 drivers/usb/serial/f81232.c if (baudrate > 0) { baudrate 555 drivers/usb/serial/f81232.c f81232_set_baudrate(tty, port, baudrate, old_baud); baudrate 539 drivers/usb/serial/f81534.c static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate) baudrate 541 drivers/usb/serial/f81534.c if (!baudrate) baudrate 545 drivers/usb/serial/f81534.c return DIV_ROUND_CLOSEST(clockrate, baudrate); baudrate 548 drivers/usb/serial/f81534.c static int f81534_find_clk(u32 baudrate) baudrate 553 drivers/usb/serial/f81534.c if (baudrate <= baudrate_table[idx] && baudrate 554 drivers/usb/serial/f81534.c baudrate_table[idx] % baudrate == 0) baudrate 562 drivers/usb/serial/f81534.c struct tty_struct *tty, u32 baudrate, u32 old_baudrate, u8 lcr) baudrate 570 drivers/usb/serial/f81534.c u32 baud_list[] = {baudrate, old_baudrate, F81534_DEFAULT_BAUD_RATE}; baudrate 575 drivers/usb/serial/f81534.c baudrate = baud_list[i]; baudrate 576 drivers/usb/serial/f81534.c tty_encode_baud_rate(tty, baudrate, baudrate); baudrate 595 drivers/usb/serial/f81534.c if (baudrate <= 1200) baudrate 606 drivers/usb/serial/f81534.c if (baudrate <= 1200) baudrate 618 drivers/usb/serial/f81534.c divisor = f81534_calc_baud_divisor(baudrate, port_priv->baud_base); baudrate 2358 drivers/usb/serial/io_edgeport.c static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor) baudrate 2364 drivers/usb/serial/io_edgeport.c if (divisor_table[i].BaudRate == baudrate) { baudrate 2373 drivers/usb/serial/io_edgeport.c if (baudrate > 50 && baudrate < 230400) { baudrate 2375 drivers/usb/serial/io_edgeport.c custom = (__u16)((230400L + baudrate/2) / baudrate); baudrate 2379 drivers/usb/serial/io_edgeport.c dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom); baudrate 102 drivers/usb/serial/kl5kusb105.c u8 baudrate; baudrate 142 drivers/usb/serial/kl5kusb105.c settings->pktlen, settings->baudrate, settings->databits, baudrate 220 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b9600; baudrate 265 drivers/usb/serial/kl5kusb105.c cfg->baudrate = kl5kusb105a_sio_b9600; baudrate 273 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = cfg->baudrate; baudrate 428 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b1200; baudrate 431 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b2400; baudrate 434 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b4800; baudrate 437 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b9600; baudrate 440 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b19200; baudrate 443 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b38400; baudrate 446 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b57600; baudrate 449 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b115200; baudrate 453 drivers/usb/serial/kl5kusb105.c priv->cfg.baudrate = kl5kusb105a_sio_b9600; baudrate 1402 drivers/usb/serial/mos7720.c __u32 baudrate; baudrate 1433 drivers/usb/serial/mos7720.c static int calc_baud_rate_divisor(struct usb_serial_port *port, int baudrate, int *divisor) baudrate 1441 drivers/usb/serial/mos7720.c dev_dbg(&port->dev, "%s - %d\n", __func__, baudrate); baudrate 1444 drivers/usb/serial/mos7720.c if (divisor_table[i].baudrate == baudrate) { baudrate 1452 drivers/usb/serial/mos7720.c if (baudrate > 75 && baudrate < 230400) { baudrate 1454 drivers/usb/serial/mos7720.c custom = (__u16)(230400L / baudrate); baudrate 1457 drivers/usb/serial/mos7720.c round1 = (__u16)(2304000L / baudrate); baudrate 1463 drivers/usb/serial/mos7720.c dev_dbg(&port->dev, "Baud %d = %d\n", baudrate, custom); baudrate 1477 drivers/usb/serial/mos7720.c int baudrate) baudrate 1492 drivers/usb/serial/mos7720.c dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate); baudrate 1495 drivers/usb/serial/mos7720.c status = calc_baud_rate_divisor(port, baudrate, &divisor); baudrate 146 drivers/usb/serial/quatech2.c static inline int calc_baud_divisor(int baudrate) baudrate 150 drivers/usb/serial/quatech2.c divisor = MAX_BAUD_RATE / baudrate; baudrate 151 drivers/usb/serial/quatech2.c rem = MAX_BAUD_RATE % baudrate; baudrate 153 drivers/usb/serial/quatech2.c if (((rem * 2) >= baudrate) && (baudrate != 110)) baudrate 161 drivers/usb/serial/quatech2.c u16 baudrate, u16 lcr) baudrate 163 drivers/usb/serial/quatech2.c int divisor = calc_baud_divisor(baudrate); baudrate 237 include/linux/serdev.h static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev, unsigned int baudrate) baudrate 49 include/linux/yam.h unsigned int baudrate; /* Baud rate of the RS232 port */ baudrate 461 include/net/nfc/nci_core.h void nci_uart_set_config(struct nci_uart *nu, int baudrate, int flow_ctrl); baudrate 433 net/nfc/nci/uart.c void nci_uart_set_config(struct nci_uart *nu, int baudrate, int flow_ctrl) baudrate 443 net/nfc/nci/uart.c tty_termios_encode_baud_rate(&new_termios, baudrate, baudrate); baudrate 680 sound/soc/fsl/fsl_ssi.c unsigned long clkrate, baudrate, tmprate; baudrate 744 sound/soc/fsl/fsl_ssi.c baudrate = tmprate; baudrate 769 sound/soc/fsl/fsl_ssi.c ret = clk_set_rate(ssi->baudclk, baudrate);