root/arch/x86/kernel/topology.c

DEFINITIONS

1. enable_cpu0_hotplug
2. _debug_hotplug_cpu
3. debug_hotplug_cpu
4. arch_register_cpu
5. arch_unregister_cpu
6. arch_register_cpu
7. topology_init

   1 /*
   2  * Populate sysfs with topology information
   3  *
   4  * Written by: Matthew Dobson, IBM Corporation
   5  * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
   6  *
   7  * Copyright (C) 2002, IBM Corp.
   8  *
   9  * All rights reserved.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful, but
  17  * WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  19  * NON INFRINGEMENT.  See the GNU General Public License for more
  20  * details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25  *
  26  * Send feedback to <colpatch@us.ibm.com>
  27  */
  28 #include <linux/nodemask.h>
  29 #include <linux/export.h>
  30 #include <linux/mmzone.h>
  31 #include <linux/init.h>
  32 #include <linux/smp.h>
  33 #include <linux/irq.h>
  34 #include <asm/cpu.h>
  35 
  36 static DEFINE_PER_CPU(struct x86_cpu, cpu_devices);
  37 
  38 #ifdef CONFIG_HOTPLUG_CPU
  39 
  40 #ifdef CONFIG_BOOTPARAM_HOTPLUG_CPU0
  41 static int cpu0_hotpluggable = 1;
  42 #else
  43 static int cpu0_hotpluggable;
  44 static int __init enable_cpu0_hotplug(char *str)
  45 {
  46         cpu0_hotpluggable = 1;
  47         return 1;
  48 }
  49 
  50 __setup("cpu0_hotplug", enable_cpu0_hotplug);
  51 #endif
  52 
  53 #ifdef CONFIG_DEBUG_HOTPLUG_CPU0
  54 /*
  55  * This function offlines a CPU as early as possible and allows userspace to
  56  * boot up without the CPU. The CPU can be onlined back by user after boot.
  57  *
  58  * This is only called for debugging CPU offline/online feature.
  59  */
  60 int _debug_hotplug_cpu(int cpu, int action)
  61 {
  62         struct device *dev = get_cpu_device(cpu);
  63         int ret;
  64 
  65         if (!cpu_is_hotpluggable(cpu))
  66                 return -EINVAL;
  67 
  68         lock_device_hotplug();
  69 
  70         switch (action) {
  71         case 0:
  72                 ret = cpu_down(cpu);
  73                 if (!ret) {
  74                         pr_info("DEBUG_HOTPLUG_CPU0: CPU %u is now offline\n", cpu);
  75                         dev->offline = true;
  76                         kobject_uevent(&dev->kobj, KOBJ_OFFLINE);
  77                 } else
  78                         pr_debug("Can't offline CPU%d.\n", cpu);
  79                 break;
  80         case 1:
  81                 ret = cpu_up(cpu);
  82                 if (!ret) {
  83                         dev->offline = false;
  84                         kobject_uevent(&dev->kobj, KOBJ_ONLINE);
  85                 } else {
  86                         pr_debug("Can't online CPU%d.\n", cpu);
  87                 }
  88                 break;
  89         default:
  90                 ret = -EINVAL;
  91         }
  92 
  93         unlock_device_hotplug();
  94 
  95         return ret;
  96 }
  97 
  98 static int __init debug_hotplug_cpu(void)
  99 {
 100         _debug_hotplug_cpu(0, 0);
 101         return 0;
 102 }
 103 
 104 late_initcall_sync(debug_hotplug_cpu);
 105 #endif /* CONFIG_DEBUG_HOTPLUG_CPU0 */
 106 
 107 int arch_register_cpu(int num)
 108 {
 109         struct cpuinfo_x86 *c = &cpu_data(num);
 110 
 111         /*
 112          * Currently CPU0 is only hotpluggable on Intel platforms. Other
 113          * vendors can add hotplug support later.
 114          * Xen PV guests don't support CPU0 hotplug at all.
 115          */
 116         if (c->x86_vendor != X86_VENDOR_INTEL ||
 117             boot_cpu_has(X86_FEATURE_XENPV))
 118                 cpu0_hotpluggable = 0;
 119 
 120         /*
 121          * Two known BSP/CPU0 dependencies: Resume from suspend/hibernate
 122          * depends on BSP. PIC interrupts depend on BSP.
 123          *
 124          * If the BSP depencies are under control, one can tell kernel to
 125          * enable BSP hotplug. This basically adds a control file and
 126          * one can attempt to offline BSP.
 127          */
 128         if (num == 0 && cpu0_hotpluggable) {
 129                 unsigned int irq;
 130                 /*
 131                  * We won't take down the boot processor on i386 if some
 132                  * interrupts only are able to be serviced by the BSP in PIC.
 133                  */
 134                 for_each_active_irq(irq) {
 135                         if (!IO_APIC_IRQ(irq) && irq_has_action(irq)) {
 136                                 cpu0_hotpluggable = 0;
 137                                 break;
 138                         }
 139                 }
 140         }
 141         if (num || cpu0_hotpluggable)
 142                 per_cpu(cpu_devices, num).cpu.hotpluggable = 1;
 143 
 144         return register_cpu(&per_cpu(cpu_devices, num).cpu, num);
 145 }
 146 EXPORT_SYMBOL(arch_register_cpu);
 147 
 148 void arch_unregister_cpu(int num)
 149 {
 150         unregister_cpu(&per_cpu(cpu_devices, num).cpu);
 151 }
 152 EXPORT_SYMBOL(arch_unregister_cpu);
 153 #else /* CONFIG_HOTPLUG_CPU */
 154 
 155 static int __init arch_register_cpu(int num)
 156 {
 157         return register_cpu(&per_cpu(cpu_devices, num).cpu, num);
 158 }
 159 #endif /* CONFIG_HOTPLUG_CPU */
 160 
 161 static int __init topology_init(void)
 162 {
 163         int i;
 164 
 165 #ifdef CONFIG_NUMA
 166         for_each_online_node(i)
 167                 register_one_node(i);
 168 #endif
 169 
 170         for_each_present_cpu(i)
 171                 arch_register_cpu(i);
 172 
 173         return 0;
 174 }
 175 subsys_initcall(topology_init);