arch/powerpc/include/asm/mpic.h

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
fsl_mpic_primary_get_version
   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #ifndef _ASM_POWERPC_MPIC_H
   3 #define _ASM_POWERPC_MPIC_H
   4 #ifdef __KERNEL__
   5 
   6 #include <linux/irq.h>
   7 #include <asm/dcr.h>
   8 #include <asm/msi_bitmap.h>
   9 
  10 /*
  11  * Global registers
  12  */
  13 
  14 #define MPIC_GREG_BASE                  0x01000
  15 
  16 #define MPIC_GREG_FEATURE_0             0x00000
  17 #define         MPIC_GREG_FEATURE_LAST_SRC_MASK         0x07ff0000
  18 #define         MPIC_GREG_FEATURE_LAST_SRC_SHIFT        16
  19 #define         MPIC_GREG_FEATURE_LAST_CPU_MASK         0x00001f00
  20 #define         MPIC_GREG_FEATURE_LAST_CPU_SHIFT        8
  21 #define         MPIC_GREG_FEATURE_VERSION_MASK          0xff
  22 #define MPIC_GREG_FEATURE_1             0x00010
  23 #define MPIC_GREG_GLOBAL_CONF_0         0x00020
  24 #define         MPIC_GREG_GCONF_RESET                   0x80000000
  25 /* On the FSL mpic implementations the Mode field is expand to be
  26  * 2 bits wide:
  27  *      0b00 = pass through (interrupts routed to IRQ0)
  28  *      0b01 = Mixed mode
  29  *      0b10 = reserved
  30  *      0b11 = External proxy / coreint
  31  */
  32 #define         MPIC_GREG_GCONF_COREINT                 0x60000000
  33 #define         MPIC_GREG_GCONF_8259_PTHROU_DIS         0x20000000
  34 #define         MPIC_GREG_GCONF_NO_BIAS                 0x10000000
  35 #define         MPIC_GREG_GCONF_BASE_MASK               0x000fffff
  36 #define         MPIC_GREG_GCONF_MCK                     0x08000000
  37 #define MPIC_GREG_GLOBAL_CONF_1         0x00030
  38 #define MPIC_GREG_VENDOR_0              0x00040
  39 #define MPIC_GREG_VENDOR_1              0x00050
  40 #define MPIC_GREG_VENDOR_2              0x00060
  41 #define MPIC_GREG_VENDOR_3              0x00070
  42 #define MPIC_GREG_VENDOR_ID             0x00080
  43 #define         MPIC_GREG_VENDOR_ID_STEPPING_MASK       0x00ff0000
  44 #define         MPIC_GREG_VENDOR_ID_STEPPING_SHIFT      16
  45 #define         MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK      0x0000ff00
  46 #define         MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT     8
  47 #define         MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK      0x000000ff
  48 #define MPIC_GREG_PROCESSOR_INIT        0x00090
  49 #define MPIC_GREG_IPI_VECTOR_PRI_0      0x000a0
  50 #define MPIC_GREG_IPI_VECTOR_PRI_1      0x000b0
  51 #define MPIC_GREG_IPI_VECTOR_PRI_2      0x000c0
  52 #define MPIC_GREG_IPI_VECTOR_PRI_3      0x000d0
  53 #define MPIC_GREG_IPI_STRIDE            0x10
  54 #define MPIC_GREG_SPURIOUS              0x000e0
  55 #define MPIC_GREG_TIMER_FREQ            0x000f0
  56 
  57 /*
  58  *
  59  * Timer registers
  60  */
  61 #define MPIC_TIMER_BASE                 0x01100
  62 #define MPIC_TIMER_STRIDE               0x40
  63 #define MPIC_TIMER_GROUP_STRIDE         0x1000
  64 
  65 #define MPIC_TIMER_CURRENT_CNT          0x00000
  66 #define MPIC_TIMER_BASE_CNT             0x00010
  67 #define MPIC_TIMER_VECTOR_PRI           0x00020
  68 #define MPIC_TIMER_DESTINATION          0x00030
  69 
  70 /*
  71  * Per-Processor registers
  72  */
  73 
  74 #define MPIC_CPU_THISBASE               0x00000
  75 #define MPIC_CPU_BASE                   0x20000
  76 #define MPIC_CPU_STRIDE                 0x01000
  77 
  78 #define MPIC_CPU_IPI_DISPATCH_0         0x00040
  79 #define MPIC_CPU_IPI_DISPATCH_1         0x00050
  80 #define MPIC_CPU_IPI_DISPATCH_2         0x00060
  81 #define MPIC_CPU_IPI_DISPATCH_3         0x00070
  82 #define MPIC_CPU_IPI_DISPATCH_STRIDE    0x00010
  83 #define MPIC_CPU_CURRENT_TASK_PRI       0x00080
  84 #define         MPIC_CPU_TASKPRI_MASK                   0x0000000f
  85 #define MPIC_CPU_WHOAMI                 0x00090
  86 #define         MPIC_CPU_WHOAMI_MASK                    0x0000001f
  87 #define MPIC_CPU_INTACK                 0x000a0
  88 #define MPIC_CPU_EOI                    0x000b0
  89 #define MPIC_CPU_MCACK                  0x000c0
  90 
  91 /*
  92  * Per-source registers
  93  */
  94 
  95 #define MPIC_IRQ_BASE                   0x10000
  96 #define MPIC_IRQ_STRIDE                 0x00020
  97 #define MPIC_IRQ_VECTOR_PRI             0x00000
  98 #define         MPIC_VECPRI_MASK                        0x80000000
  99 #define         MPIC_VECPRI_ACTIVITY                    0x40000000      /* Read Only */
 100 #define         MPIC_VECPRI_PRIORITY_MASK               0x000f0000
 101 #define         MPIC_VECPRI_PRIORITY_SHIFT              16
 102 #define         MPIC_VECPRI_VECTOR_MASK                 0x000007ff
 103 #define         MPIC_VECPRI_POLARITY_POSITIVE           0x00800000
 104 #define         MPIC_VECPRI_POLARITY_NEGATIVE           0x00000000
 105 #define         MPIC_VECPRI_POLARITY_MASK               0x00800000
 106 #define         MPIC_VECPRI_SENSE_LEVEL                 0x00400000
 107 #define         MPIC_VECPRI_SENSE_EDGE                  0x00000000
 108 #define         MPIC_VECPRI_SENSE_MASK                  0x00400000
 109 #define MPIC_IRQ_DESTINATION            0x00010
 110 
 111 #define MPIC_FSL_BRR1                   0x00000
 112 #define         MPIC_FSL_BRR1_VER                       0x0000ffff
 113 
 114 #define MPIC_MAX_IRQ_SOURCES    2048
 115 #define MPIC_MAX_CPUS           32
 116 #define MPIC_MAX_ISU            32
 117 
 118 #define MPIC_MAX_ERR      32
 119 #define MPIC_FSL_ERR_INT  16
 120 
 121 /*
 122  * Tsi108 implementation of MPIC has many differences from the original one
 123  */
 124 
 125 /*
 126  * Global registers
 127  */
 128 
 129 #define TSI108_GREG_BASE                0x00000
 130 #define TSI108_GREG_FEATURE_0           0x00000
 131 #define TSI108_GREG_GLOBAL_CONF_0       0x00004
 132 #define TSI108_GREG_VENDOR_ID           0x0000c
 133 #define TSI108_GREG_IPI_VECTOR_PRI_0    0x00204         /* Doorbell 0 */
 134 #define TSI108_GREG_IPI_STRIDE          0x0c
 135 #define TSI108_GREG_SPURIOUS            0x00010
 136 #define TSI108_GREG_TIMER_FREQ          0x00014
 137 
 138 /*
 139  * Timer registers
 140  */
 141 #define TSI108_TIMER_BASE               0x0030
 142 #define TSI108_TIMER_STRIDE             0x10
 143 #define TSI108_TIMER_CURRENT_CNT        0x00000
 144 #define TSI108_TIMER_BASE_CNT           0x00004
 145 #define TSI108_TIMER_VECTOR_PRI         0x00008
 146 #define TSI108_TIMER_DESTINATION        0x0000c
 147 
 148 /*
 149  * Per-Processor registers
 150  */
 151 #define TSI108_CPU_BASE                 0x00300
 152 #define TSI108_CPU_STRIDE               0x00040
 153 #define TSI108_CPU_IPI_DISPATCH_0       0x00200
 154 #define TSI108_CPU_IPI_DISPATCH_STRIDE  0x00000
 155 #define TSI108_CPU_CURRENT_TASK_PRI     0x00000
 156 #define TSI108_CPU_WHOAMI               0xffffffff
 157 #define TSI108_CPU_INTACK               0x00004
 158 #define TSI108_CPU_EOI                  0x00008
 159 #define TSI108_CPU_MCACK                0x00004 /* Doesn't really exist here */
 160 
 161 /*
 162  * Per-source registers
 163  */
 164 #define TSI108_IRQ_BASE                 0x00100
 165 #define TSI108_IRQ_STRIDE               0x00008
 166 #define TSI108_IRQ_VECTOR_PRI           0x00000
 167 #define TSI108_VECPRI_VECTOR_MASK       0x000000ff
 168 #define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000
 169 #define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000
 170 #define TSI108_VECPRI_SENSE_LEVEL       0x02000000
 171 #define TSI108_VECPRI_SENSE_EDGE        0x00000000
 172 #define TSI108_VECPRI_POLARITY_MASK     0x01000000
 173 #define TSI108_VECPRI_SENSE_MASK        0x02000000
 174 #define TSI108_IRQ_DESTINATION          0x00004
 175 
 176 /* weird mpic register indices and mask bits in the HW info array */
 177 enum {
 178         MPIC_IDX_GREG_BASE = 0,
 179         MPIC_IDX_GREG_FEATURE_0,
 180         MPIC_IDX_GREG_GLOBAL_CONF_0,
 181         MPIC_IDX_GREG_VENDOR_ID,
 182         MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
 183         MPIC_IDX_GREG_IPI_STRIDE,
 184         MPIC_IDX_GREG_SPURIOUS,
 185         MPIC_IDX_GREG_TIMER_FREQ,
 186 
 187         MPIC_IDX_TIMER_BASE,
 188         MPIC_IDX_TIMER_STRIDE,
 189         MPIC_IDX_TIMER_CURRENT_CNT,
 190         MPIC_IDX_TIMER_BASE_CNT,
 191         MPIC_IDX_TIMER_VECTOR_PRI,
 192         MPIC_IDX_TIMER_DESTINATION,
 193 
 194         MPIC_IDX_CPU_BASE,
 195         MPIC_IDX_CPU_STRIDE,
 196         MPIC_IDX_CPU_IPI_DISPATCH_0,
 197         MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
 198         MPIC_IDX_CPU_CURRENT_TASK_PRI,
 199         MPIC_IDX_CPU_WHOAMI,
 200         MPIC_IDX_CPU_INTACK,
 201         MPIC_IDX_CPU_EOI,
 202         MPIC_IDX_CPU_MCACK,
 203 
 204         MPIC_IDX_IRQ_BASE,
 205         MPIC_IDX_IRQ_STRIDE,
 206         MPIC_IDX_IRQ_VECTOR_PRI,
 207 
 208         MPIC_IDX_VECPRI_VECTOR_MASK,
 209         MPIC_IDX_VECPRI_POLARITY_POSITIVE,
 210         MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
 211         MPIC_IDX_VECPRI_SENSE_LEVEL,
 212         MPIC_IDX_VECPRI_SENSE_EDGE,
 213         MPIC_IDX_VECPRI_POLARITY_MASK,
 214         MPIC_IDX_VECPRI_SENSE_MASK,
 215         MPIC_IDX_IRQ_DESTINATION,
 216         MPIC_IDX_END
 217 };
 218 
 219 
 220 #ifdef CONFIG_MPIC_U3_HT_IRQS
 221 /* Fixup table entry */
 222 struct mpic_irq_fixup
 223 {
 224         u8 __iomem      *base;
 225         u8 __iomem      *applebase;
 226         u32             data;
 227         unsigned int    index;
 228 };
 229 #endif /* CONFIG_MPIC_U3_HT_IRQS */
 230 
 231 
 232 enum mpic_reg_type {
 233         mpic_access_mmio_le,
 234         mpic_access_mmio_be,
 235 #ifdef CONFIG_PPC_DCR
 236         mpic_access_dcr
 237 #endif
 238 };
 239 
 240 struct mpic_reg_bank {
 241         u32 __iomem     *base;
 242 #ifdef CONFIG_PPC_DCR
 243         dcr_host_t      dhost;
 244 #endif /* CONFIG_PPC_DCR */
 245 };
 246 
 247 struct mpic_irq_save {
 248         u32             vecprio,
 249                         dest;
 250 #ifdef CONFIG_MPIC_U3_HT_IRQS
 251         u32             fixup_data;
 252 #endif
 253 };
 254 
 255 /* The instance data of a given MPIC */
 256 struct mpic
 257 {
 258         /* The OpenFirmware dt node for this MPIC */
 259         struct device_node *node;
 260 
 261         /* The remapper for this MPIC */
 262         struct irq_domain       *irqhost;
 263 
 264         /* The "linux" controller struct */
 265         struct irq_chip         hc_irq;
 266 #ifdef CONFIG_MPIC_U3_HT_IRQS
 267         struct irq_chip         hc_ht_irq;
 268 #endif
 269 #ifdef CONFIG_SMP
 270         struct irq_chip         hc_ipi;
 271 #endif
 272         struct irq_chip         hc_tm;
 273         struct irq_chip         hc_err;
 274         const char              *name;
 275         /* Flags */
 276         unsigned int            flags;
 277         /* How many irq sources in a given ISU */
 278         unsigned int            isu_size;
 279         unsigned int            isu_shift;
 280         unsigned int            isu_mask;
 281         /* Number of sources */
 282         unsigned int            num_sources;
 283 
 284         /* vector numbers used for internal sources (ipi/timers) */
 285         unsigned int            ipi_vecs[4];
 286         unsigned int            timer_vecs[8];
 287         /* vector numbers used for FSL MPIC error interrupts */
 288         unsigned int            err_int_vecs[MPIC_MAX_ERR];
 289 
 290         /* Spurious vector to program into unused sources */
 291         unsigned int            spurious_vec;
 292 
 293 #ifdef CONFIG_MPIC_U3_HT_IRQS
 294         /* The fixup table */
 295         struct mpic_irq_fixup   *fixups;
 296         raw_spinlock_t  fixup_lock;
 297 #endif
 298 
 299         /* Register access method */
 300         enum mpic_reg_type      reg_type;
 301 
 302         /* The physical base address of the MPIC */
 303         phys_addr_t paddr;
 304 
 305         /* The various ioremap'ed bases */
 306         struct mpic_reg_bank    thiscpuregs;
 307         struct mpic_reg_bank    gregs;
 308         struct mpic_reg_bank    tmregs;
 309         struct mpic_reg_bank    cpuregs[MPIC_MAX_CPUS];
 310         struct mpic_reg_bank    isus[MPIC_MAX_ISU];
 311 
 312         /* ioremap'ed base for error interrupt registers */
 313         u32 __iomem     *err_regs;
 314 
 315         /* Protected sources */
 316         unsigned long           *protected;
 317 
 318 #ifdef CONFIG_MPIC_WEIRD
 319         /* Pointer to HW info array */
 320         u32                     *hw_set;
 321 #endif
 322 
 323 #ifdef CONFIG_PCI_MSI
 324         struct msi_bitmap       msi_bitmap;
 325 #endif
 326 
 327 #ifdef CONFIG_MPIC_BROKEN_REGREAD
 328         u32                     isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];
 329 #endif
 330 
 331         /* link */
 332         struct mpic             *next;
 333 
 334 #ifdef CONFIG_PM
 335         struct mpic_irq_save    *save_data;
 336 #endif
 337 };
 338 
 339 extern struct bus_type mpic_subsys;
 340 
 341 /*
 342  * MPIC flags (passed to mpic_alloc)
 343  *
 344  * The top 4 bits contain an MPIC bhw id that is used to index the
 345  * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
 346  * Note setting any ID (leaving those bits to 0) means standard MPIC
 347  */
 348 
 349 /*
 350  * This is a secondary ("chained") controller; it only uses the CPU0
 351  * registers.  Primary controllers have IPIs and affinity control.
 352  */
 353 #define MPIC_SECONDARY                  0x00000001
 354 
 355 /* Set this for a big-endian MPIC */
 356 #define MPIC_BIG_ENDIAN                 0x00000002
 357 /* Broken U3 MPIC */
 358 #define MPIC_U3_HT_IRQS                 0x00000004
 359 /* Broken IPI registers (autodetected) */
 360 #define MPIC_BROKEN_IPI                 0x00000008
 361 /* Spurious vector requires EOI */
 362 #define MPIC_SPV_EOI                    0x00000020
 363 /* No passthrough disable */
 364 #define MPIC_NO_PTHROU_DIS              0x00000040
 365 /* DCR based MPIC */
 366 #define MPIC_USES_DCR                   0x00000080
 367 /* MPIC has 11-bit vector fields (or larger) */
 368 #define MPIC_LARGE_VECTORS              0x00000100
 369 /* Enable delivery of prio 15 interrupts as MCK instead of EE */
 370 #define MPIC_ENABLE_MCK                 0x00000200
 371 /* Disable bias among target selection, spread interrupts evenly */
 372 #define MPIC_NO_BIAS                    0x00000400
 373 /* Destination only supports a single CPU at a time */
 374 #define MPIC_SINGLE_DEST_CPU            0x00001000
 375 /* Enable CoreInt delivery of interrupts */
 376 #define MPIC_ENABLE_COREINT             0x00002000
 377 /* Do not reset the MPIC during initialization */
 378 #define MPIC_NO_RESET                   0x00004000
 379 /* Freescale MPIC (compatible includes "fsl,mpic") */
 380 #define MPIC_FSL                        0x00008000
 381 /* Freescale MPIC supports EIMR (error interrupt mask register).
 382  * This flag is set for MPIC version >= 4.1 (version determined
 383  * from the BRR1 register).
 384 */
 385 #define MPIC_FSL_HAS_EIMR               0x00010000
 386 
 387 /* MPIC HW modification ID */
 388 #define MPIC_REGSET_MASK                0xf0000000
 389 #define MPIC_REGSET(val)                (((val) & 0xf ) << 28)
 390 #define MPIC_GET_REGSET(flags)          (((flags) >> 28) & 0xf)
 391 
 392 #define MPIC_REGSET_STANDARD            MPIC_REGSET(0)  /* Original MPIC */
 393 #define MPIC_REGSET_TSI108              MPIC_REGSET(1)  /* Tsi108/109 PIC */
 394 
 395 /* Get the version of primary MPIC */
 396 #ifdef CONFIG_MPIC
 397 extern u32 fsl_mpic_primary_get_version(void);
 398 #else
 399 static inline u32 fsl_mpic_primary_get_version(void)
 400 {
 401         return 0;
 402 }
 403 #endif
 404 
 405 /* Allocate the controller structure and setup the linux irq descs
 406  * for the range if interrupts passed in. No HW initialization is
 407  * actually performed.
 408  * 
 409  * @phys_addr:  physial base address of the MPIC
 410  * @flags:      flags, see constants above
 411  * @isu_size:   number of interrupts in an ISU. Use 0 to use a
 412  *              standard ISU-less setup (aka powermac)
 413  * @irq_offset: first irq number to assign to this mpic
 414  * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
 415  *              to match the number of sources
 416  * @ipi_offset: first irq number to assign to this mpic IPI sources,
 417  *              used only on primary mpic
 418  * @senses:     array of sense values
 419  * @senses_num: number of entries in the array
 420  *
 421  * Note about the sense array. If none is passed, all interrupts are
 422  * setup to be level negative unless MPIC_U3_HT_IRQS is set in which
 423  * case they are edge positive (and the array is ignored anyway).
 424  * The values in the array start at the first source of the MPIC,
 425  * that is senses[0] correspond to linux irq "irq_offset".
 426  */
 427 extern struct mpic *mpic_alloc(struct device_node *node,
 428                                phys_addr_t phys_addr,
 429                                unsigned int flags,
 430                                unsigned int isu_size,
 431                                unsigned int irq_count,
 432                                const char *name);
 433 
 434 /* Assign ISUs, to call before mpic_init()
 435  *
 436  * @mpic:       controller structure as returned by mpic_alloc()
 437  * @isu_num:    ISU number
 438  * @phys_addr:  physical address of the ISU
 439  */
 440 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 441                             phys_addr_t phys_addr);
 442 
 443 
 444 /* Initialize the controller. After this has been called, none of the above
 445  * should be called again for this mpic
 446  */
 447 extern void mpic_init(struct mpic *mpic);
 448 
 449 /*
 450  * All of the following functions must only be used after the
 451  * ISUs have been assigned and the controller fully initialized
 452  * with mpic_init()
 453  */
 454 
 455 
 456 /* Change the priority of an interrupt. Default is 8 for irqs and
 457  * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
 458  * IPI number is then the offset'ed (linux irq number mapped to the IPI)
 459  */
 460 extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
 461 
 462 /* Setup a non-boot CPU */
 463 extern void mpic_setup_this_cpu(void);
 464 
 465 /* Clean up for kexec (or cpu offline or ...) */
 466 extern void mpic_teardown_this_cpu(int secondary);
 467 
 468 /* Get the current cpu priority for this cpu (0..15) */
 469 extern int mpic_cpu_get_priority(void);
 470 
 471 /* Set the current cpu priority for this cpu */
 472 extern void mpic_cpu_set_priority(int prio);
 473 
 474 /* Request IPIs on primary mpic */
 475 extern void mpic_request_ipis(void);
 476 
 477 /* Send a message (IPI) to a given target (cpu number or MSG_*) */
 478 void smp_mpic_message_pass(int target, int msg);
 479 
 480 /* Unmask a specific virq */
 481 extern void mpic_unmask_irq(struct irq_data *d);
 482 /* Mask a specific virq */
 483 extern void mpic_mask_irq(struct irq_data *d);
 484 /* EOI a specific virq */
 485 extern void mpic_end_irq(struct irq_data *d);
 486 
 487 /* Fetch interrupt from a given mpic */
 488 extern unsigned int mpic_get_one_irq(struct mpic *mpic);
 489 /* This one gets from the primary mpic */
 490 extern unsigned int mpic_get_irq(void);
 491 /* This one gets from the primary mpic via CoreInt*/
 492 extern unsigned int mpic_get_coreint_irq(void);
 493 /* Fetch Machine Check interrupt from primary mpic */
 494 extern unsigned int mpic_get_mcirq(void);
 495 
 496 #endif /* __KERNEL__ */
 497 #endif  /* _ASM_POWERPC_MPIC_H */
/* [<][>][^][v][top][bottom][index][help] */
root/arch/powerpc/include/asm/mpic.h

INCLUDED FROM

DEFINITIONS
