arch/powerpc/platforms/embedded6xx/mpc10x.h

/* [<][>][^][v][top][bottom][index][help] */
   1 /*
   2  * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
   3  * ctlr/EPIC/etc.
   4  *
   5  * Author: Mark A. Greer
   6  *         mgreer@mvista.com
   7  *
   8  * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
   9  * the terms of the GNU General Public License version 2.  This program
  10  * is licensed "as is" without any warranty of any kind, whether express
  11  * or implied.
  12  */
  13 #ifndef __PPC_KERNEL_MPC10X_H
  14 #define __PPC_KERNEL_MPC10X_H
  15 
  16 #include <linux/pci_ids.h>
  17 #include <asm/pci-bridge.h>
  18 
  19 /*
  20  * The values here don't completely map everything but should work in most
  21  * cases.
  22  *
  23  * MAP A (PReP Map)
  24  *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
  25  *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
  26  *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
  27  *
  28  * MAP B (CHRP Map)
  29  *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
  30  *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
  31  *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
  32  */
  33 
  34 /*
  35  * Define the vendor/device IDs for the various bridges--should be added to
  36  * <linux/pci_ids.h>
  37  */
  38 #define MPC10X_BRIDGE_106       ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) |  \
  39                                   PCI_VENDOR_ID_MOTOROLA)
  40 #define MPC10X_BRIDGE_8240      ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
  41 #define MPC10X_BRIDGE_107       ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
  42 #define MPC10X_BRIDGE_8245      ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
  43 
  44 /* Define the type of map to use */
  45 #define MPC10X_MEM_MAP_A                1
  46 #define MPC10X_MEM_MAP_B                2
  47 
  48 /* Map A (PReP Map) Defines */
  49 #define MPC10X_MAPA_CNFG_ADDR           0x80000cf8
  50 #define MPC10X_MAPA_CNFG_DATA           0x80000cfc
  51 
  52 #define MPC10X_MAPA_ISA_IO_BASE         0x80000000
  53 #define MPC10X_MAPA_ISA_MEM_BASE        0xc0000000
  54 #define MPC10X_MAPA_DRAM_OFFSET         0x80000000
  55 
  56 #define MPC10X_MAPA_PCI_INTACK_ADDR     0xbffffff0
  57 #define MPC10X_MAPA_PCI_IO_START        0x00000000
  58 #define MPC10X_MAPA_PCI_IO_END         (0x00800000 - 1)
  59 #define MPC10X_MAPA_PCI_MEM_START       0x00000000
  60 #define MPC10X_MAPA_PCI_MEM_END        (0x20000000 - 1)
  61 
  62 #define MPC10X_MAPA_PCI_MEM_OFFSET      (MPC10X_MAPA_ISA_MEM_BASE -     \
  63                                          MPC10X_MAPA_PCI_MEM_START)
  64 
  65 /* Map B (CHRP Map) Defines */
  66 #define MPC10X_MAPB_CNFG_ADDR           0xfec00000
  67 #define MPC10X_MAPB_CNFG_DATA           0xfee00000
  68 
  69 #define MPC10X_MAPB_ISA_IO_BASE         0xfe000000
  70 #define MPC10X_MAPB_ISA_MEM_BASE        0x80000000
  71 #define MPC10X_MAPB_DRAM_OFFSET         0x00000000
  72 
  73 #define MPC10X_MAPB_PCI_INTACK_ADDR     0xfef00000
  74 #define MPC10X_MAPB_PCI_IO_START        0x00000000
  75 #define MPC10X_MAPB_PCI_IO_END         (0x00c00000 - 1)
  76 #define MPC10X_MAPB_PCI_MEM_START       0x80000000
  77 #define MPC10X_MAPB_PCI_MEM_END        (0xc0000000 - 1)
  78 
  79 #define MPC10X_MAPB_PCI_MEM_OFFSET      (MPC10X_MAPB_ISA_MEM_BASE -     \
  80                                          MPC10X_MAPB_PCI_MEM_START)
  81 
  82 /* Miscellaneous Configuration register offsets */
  83 #define MPC10X_CFG_PIR_REG              0x09
  84 #define MPC10X_CFG_PIR_HOST_BRIDGE      0x00
  85 #define MPC10X_CFG_PIR_AGENT            0x01
  86 
  87 #define MPC10X_CFG_EUMBBAR              0x78
  88 
  89 #define MPC10X_CFG_PICR1_REG            0xa8
  90 #define MPC10X_CFG_PICR1_ADDR_MAP_MASK  0x00010000
  91 #define MPC10X_CFG_PICR1_ADDR_MAP_A     0x00010000
  92 #define MPC10X_CFG_PICR1_ADDR_MAP_B     0x00000000
  93 #define MPC10X_CFG_PICR1_SPEC_PCI_RD    0x00000004
  94 #define MPC10X_CFG_PICR1_ST_GATH_EN     0x00000040
  95 
  96 #define MPC10X_CFG_PICR2_REG            0xac
  97 #define MPC10X_CFG_PICR2_COPYBACK_OPT   0x00000001
  98 
  99 #define MPC10X_CFG_MAPB_OPTIONS_REG     0xe0
 100 #define MPC10X_CFG_MAPB_OPTIONS_CFAE    0x80    /* CPU_FD_ALIAS_EN */
 101 #define MPC10X_CFG_MAPB_OPTIONS_PFAE    0x40    /* PCI_FD_ALIAS_EN */
 102 #define MPC10X_CFG_MAPB_OPTIONS_DR      0x20    /* DLL_RESET */
 103 #define MPC10X_CFG_MAPB_OPTIONS_PCICH   0x08    /* PCI_COMPATIBILITY_HOLE */
 104 #define MPC10X_CFG_MAPB_OPTIONS_PROCCH  0x04    /* PROC_COMPATIBILITY_HOLE */
 105 
 106 /* Define offsets for the memory controller registers in the config space */
 107 #define MPC10X_MCTLR_MEM_START_1        0x80    /* Banks 0-3 */
 108 #define MPC10X_MCTLR_MEM_START_2        0x84    /* Banks 4-7 */
 109 #define MPC10X_MCTLR_EXT_MEM_START_1    0x88    /* Banks 0-3 */
 110 #define MPC10X_MCTLR_EXT_MEM_START_2    0x8c    /* Banks 4-7 */
 111 
 112 #define MPC10X_MCTLR_MEM_END_1          0x90    /* Banks 0-3 */
 113 #define MPC10X_MCTLR_MEM_END_2          0x94    /* Banks 4-7 */
 114 #define MPC10X_MCTLR_EXT_MEM_END_1      0x98    /* Banks 0-3 */
 115 #define MPC10X_MCTLR_EXT_MEM_END_2      0x9c    /* Banks 4-7 */
 116 
 117 #define MPC10X_MCTLR_MEM_BANK_ENABLES   0xa0
 118 
 119 /* Define some offset in the EUMB */
 120 #define MPC10X_EUMB_SIZE                0x00100000 /* Total EUMB size (1MB) */
 121 
 122 #define MPC10X_EUMB_MU_OFFSET           0x00000000 /* Msg Unit reg offset */
 123 #define MPC10X_EUMB_MU_SIZE             0x00001000 /* Msg Unit reg size */
 124 #define MPC10X_EUMB_DMA_OFFSET          0x00001000 /* DMA Unit reg offset */
 125 #define MPC10X_EUMB_DMA_SIZE            0x00001000 /* DMA Unit reg size  */
 126 #define MPC10X_EUMB_ATU_OFFSET          0x00002000 /* Addr xlate reg offset */
 127 #define MPC10X_EUMB_ATU_SIZE            0x00001000 /* Addr xlate reg size  */
 128 #define MPC10X_EUMB_I2C_OFFSET          0x00003000 /* I2C Unit reg offset */
 129 #define MPC10X_EUMB_I2C_SIZE            0x00001000 /* I2C Unit reg size  */
 130 #define MPC10X_EUMB_DUART_OFFSET        0x00004000 /* DUART Unit reg offset (8245) */
 131 #define MPC10X_EUMB_DUART_SIZE          0x00001000 /* DUART Unit reg size (8245) */
 132 #define MPC10X_EUMB_EPIC_OFFSET         0x00040000 /* EPIC offset in EUMB */
 133 #define MPC10X_EUMB_EPIC_SIZE           0x00030000 /* EPIC size */
 134 #define MPC10X_EUMB_PM_OFFSET           0x000fe000 /* Performance Monitor reg offset (8245) */
 135 #define MPC10X_EUMB_PM_SIZE             0x00001000 /* Performance Monitor reg size (8245) */
 136 #define MPC10X_EUMB_WP_OFFSET           0x000ff000 /* Data path diagnostic, watchpoint reg offset */
 137 #define MPC10X_EUMB_WP_SIZE             0x00001000 /* Data path diagnostic, watchpoint reg size */
 138 
 139 enum ppc_sys_devices {
 140         MPC10X_IIC1,
 141         MPC10X_DMA0,
 142         MPC10X_DMA1,
 143         MPC10X_UART0,
 144         MPC10X_UART1,
 145         NUM_PPC_SYS_DEVS,
 146 };
 147 
 148 int mpc10x_bridge_init(struct pci_controller *hose,
 149                        uint current_map,
 150                        uint new_map,
 151                        uint phys_eumb_base);
 152 unsigned long mpc10x_get_mem_size(uint mem_map);
 153 int mpc10x_enable_store_gathering(struct pci_controller *hose);
 154 int mpc10x_disable_store_gathering(struct pci_controller *hose);
 155 
 156 /* For MPC107 boards that use the built-in openpic */
 157 void mpc10x_set_openpic(void);
 158 
 159 #endif  /* __PPC_KERNEL_MPC10X_H */
/* [<][>][^][v][top][bottom][index][help] */
root/arch/powerpc/platforms/embedded6xx/mpc10x.h

INCLUDED FROM
