root/arch/powerpc/platforms/85xx/p1022_rdk.c

DEFINITIONS

1. p1022rdk_set_pixel_clock
2. p1022rdk_valid_monitor_port
3. p1022_rdk_pic_init
4. p1022_rdk_setup_arch
5. p1022_rdk_probe
6. define_machine

   1 /*
   2  * P1022 RDK board specific routines
   3  *
   4  * Copyright 2012 Freescale Semiconductor, Inc.
   5  *
   6  * Author: Timur Tabi <timur@freescale.com>
   7  *
   8  * Based on p1022_ds.c
   9  *
  10  * This file is licensed under the terms of the GNU General Public License
  11  * version 2.  This program is licensed "as is" without any warranty of any
  12  * kind, whether express or implied.
  13  */
  14 
  15 #include <linux/fsl/guts.h>
  16 #include <linux/pci.h>
  17 #include <linux/of_platform.h>
  18 #include <asm/div64.h>
  19 #include <asm/mpic.h>
  20 #include <asm/swiotlb.h>
  21 
  22 #include <sysdev/fsl_soc.h>
  23 #include <sysdev/fsl_pci.h>
  24 #include <asm/udbg.h>
  25 #include "smp.h"
  26 
  27 #include "mpc85xx.h"
  28 
  29 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
  30 
  31 /* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
  32 #define CLKDVDR_PXCKEN          0x80000000
  33 #define CLKDVDR_PXCKINV         0x10000000
  34 #define CLKDVDR_PXCKDLY         0x06000000
  35 #define CLKDVDR_PXCLK_MASK      0x00FF0000
  36 
  37 /**
  38  * p1022rdk_set_pixel_clock: program the DIU's clock
  39  *
  40  * @pixclock: the wavelength, in picoseconds, of the clock
  41  */
  42 void p1022rdk_set_pixel_clock(unsigned int pixclock)
  43 {
  44         struct device_node *guts_np = NULL;
  45         struct ccsr_guts __iomem *guts;
  46         unsigned long freq;
  47         u64 temp;
  48         u32 pxclk;
  49 
  50         /* Map the global utilities registers. */
  51         guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
  52         if (!guts_np) {
  53                 pr_err("p1022rdk: missing global utilities device node\n");
  54                 return;
  55         }
  56 
  57         guts = of_iomap(guts_np, 0);
  58         of_node_put(guts_np);
  59         if (!guts) {
  60                 pr_err("p1022rdk: could not map global utilities device\n");
  61                 return;
  62         }
  63 
  64         /* Convert pixclock from a wavelength to a frequency */
  65         temp = 1000000000000ULL;
  66         do_div(temp, pixclock);
  67         freq = temp;
  68 
  69         /*
  70          * 'pxclk' is the ratio of the platform clock to the pixel clock.
  71          * This number is programmed into the CLKDVDR register, and the valid
  72          * range of values is 2-255.
  73          */
  74         pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
  75         pxclk = clamp_t(u32, pxclk, 2, 255);
  76 
  77         /* Disable the pixel clock, and set it to non-inverted and no delay */
  78         clrbits32(&guts->clkdvdr,
  79                   CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
  80 
  81         /* Enable the clock and set the pxclk */
  82         setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
  83 
  84         iounmap(guts);
  85 }
  86 
  87 /**
  88  * p1022rdk_valid_monitor_port: set the monitor port for sysfs
  89  */
  90 enum fsl_diu_monitor_port
  91 p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
  92 {
  93         return FSL_DIU_PORT_DVI;
  94 }
  95 
  96 #endif
  97 
  98 void __init p1022_rdk_pic_init(void)
  99 {
 100         struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 101                 MPIC_SINGLE_DEST_CPU,
 102                 0, 256, " OpenPIC  ");
 103         BUG_ON(mpic == NULL);
 104         mpic_init(mpic);
 105 }
 106 
 107 /*
 108  * Setup the architecture
 109  */
 110 static void __init p1022_rdk_setup_arch(void)
 111 {
 112         if (ppc_md.progress)
 113                 ppc_md.progress("p1022_rdk_setup_arch()", 0);
 114 
 115 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 116         diu_ops.set_pixel_clock         = p1022rdk_set_pixel_clock;
 117         diu_ops.valid_monitor_port      = p1022rdk_valid_monitor_port;
 118 #endif
 119 
 120         mpc85xx_smp_init();
 121 
 122         fsl_pci_assign_primary();
 123 
 124         swiotlb_detect_4g();
 125 
 126         pr_info("Freescale / iVeia P1022 RDK reference board\n");
 127 }
 128 
 129 machine_arch_initcall(p1022_rdk, mpc85xx_common_publish_devices);
 130 
 131 /*
 132  * Called very early, device-tree isn't unflattened
 133  */
 134 static int __init p1022_rdk_probe(void)
 135 {
 136         return of_machine_is_compatible("fsl,p1022rdk");
 137 }
 138 
 139 define_machine(p1022_rdk) {
 140         .name                   = "P1022 RDK",
 141         .probe                  = p1022_rdk_probe,
 142         .setup_arch             = p1022_rdk_setup_arch,
 143         .init_IRQ               = p1022_rdk_pic_init,
 144 #ifdef CONFIG_PCI
 145         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 146         .pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 147 #endif
 148         .get_irq                = mpic_get_irq,
 149         .calibrate_decr         = generic_calibrate_decr,
 150         .progress               = udbg_progress,
 151 };