This source file includes following definitions.
- init_ioports
- mpc885ads_setup_arch
- mpc885ads_probe
- declare_of_platform_devices
- define_machine
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 #include <linux/init.h>
17 #include <linux/module.h>
18 #include <linux/param.h>
19 #include <linux/string.h>
20 #include <linux/ioport.h>
21 #include <linux/device.h>
22 #include <linux/delay.h>
23
24 #include <linux/fs_enet_pd.h>
25 #include <linux/fs_uart_pd.h>
26 #include <linux/fsl_devices.h>
27 #include <linux/mii.h>
28 #include <linux/of_address.h>
29 #include <linux/of_fdt.h>
30 #include <linux/of_platform.h>
31
32 #include <asm/delay.h>
33 #include <asm/io.h>
34 #include <asm/machdep.h>
35 #include <asm/page.h>
36 #include <asm/processor.h>
37 #include <asm/time.h>
38 #include <asm/8xx_immap.h>
39 #include <asm/cpm1.h>
40 #include <asm/fs_pd.h>
41 #include <asm/udbg.h>
42
43 #include "mpc885ads.h"
44 #include "mpc8xx.h"
45
46 static u32 __iomem *bcsr, *bcsr5;
47
48 struct cpm_pin {
49 int port, pin, flags;
50 };
51
52 static struct cpm_pin mpc885ads_pins[] = {
53
54 {CPM_PORTB, 24, CPM_PIN_INPUT},
55 {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
56
57
58 #ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
59 {CPM_PORTE, 21, CPM_PIN_INPUT},
60 {CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
61 #endif
62
63
64 {CPM_PORTA, 9, CPM_PIN_INPUT},
65 {CPM_PORTA, 8, CPM_PIN_INPUT},
66 {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
67 {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
68 {CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
69 {CPM_PORTE, 17, CPM_PIN_INPUT},
70 {CPM_PORTE, 16, CPM_PIN_INPUT},
71
72
73 {CPM_PORTA, 0, CPM_PIN_INPUT},
74 {CPM_PORTA, 1, CPM_PIN_INPUT},
75 {CPM_PORTA, 2, CPM_PIN_INPUT},
76 {CPM_PORTA, 3, CPM_PIN_INPUT},
77 {CPM_PORTA, 4, CPM_PIN_OUTPUT},
78 {CPM_PORTA, 10, CPM_PIN_OUTPUT},
79 {CPM_PORTA, 11, CPM_PIN_OUTPUT},
80 {CPM_PORTB, 19, CPM_PIN_INPUT},
81 {CPM_PORTB, 31, CPM_PIN_INPUT},
82 {CPM_PORTC, 12, CPM_PIN_INPUT},
83 {CPM_PORTC, 13, CPM_PIN_INPUT},
84 {CPM_PORTE, 30, CPM_PIN_OUTPUT},
85 {CPM_PORTE, 31, CPM_PIN_OUTPUT},
86
87
88 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
89 {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
90 {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
91 {CPM_PORTE, 16, CPM_PIN_OUTPUT},
92 {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
93 {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
94 {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
95 {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
96 {CPM_PORTE, 21, CPM_PIN_OUTPUT},
97 {CPM_PORTE, 22, CPM_PIN_OUTPUT},
98 {CPM_PORTE, 23, CPM_PIN_OUTPUT},
99 {CPM_PORTE, 24, CPM_PIN_OUTPUT},
100 {CPM_PORTE, 25, CPM_PIN_OUTPUT},
101 {CPM_PORTE, 26, CPM_PIN_OUTPUT},
102 {CPM_PORTE, 27, CPM_PIN_OUTPUT},
103 {CPM_PORTE, 28, CPM_PIN_OUTPUT},
104 {CPM_PORTE, 29, CPM_PIN_OUTPUT},
105 #endif
106
107 {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
108 {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
109 };
110
111 static void __init init_ioports(void)
112 {
113 int i;
114
115 for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
116 struct cpm_pin *pin = &mpc885ads_pins[i];
117 cpm1_set_pin(pin->port, pin->pin, pin->flags);
118 }
119
120 cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
121 cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
122 cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
123 cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
124
125
126 clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
127 }
128
129 static void __init mpc885ads_setup_arch(void)
130 {
131 struct device_node *np;
132
133 cpm_reset();
134 init_ioports();
135
136 np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
137 if (!np) {
138 printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
139 return;
140 }
141
142 bcsr = of_iomap(np, 0);
143 bcsr5 = of_iomap(np, 1);
144 of_node_put(np);
145
146 if (!bcsr || !bcsr5) {
147 printk(KERN_CRIT "Could not remap BCSR\n");
148 return;
149 }
150
151 clrbits32(&bcsr[1], BCSR1_RS232EN_1);
152 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
153 setbits32(&bcsr[1], BCSR1_RS232EN_2);
154 #else
155 clrbits32(&bcsr[1], BCSR1_RS232EN_2);
156 #endif
157
158 clrbits32(bcsr5, BCSR5_MII1_EN);
159 setbits32(bcsr5, BCSR5_MII1_RST);
160 udelay(1000);
161 clrbits32(bcsr5, BCSR5_MII1_RST);
162
163 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
164 clrbits32(bcsr5, BCSR5_MII2_EN);
165 setbits32(bcsr5, BCSR5_MII2_RST);
166 udelay(1000);
167 clrbits32(bcsr5, BCSR5_MII2_RST);
168 #else
169 setbits32(bcsr5, BCSR5_MII2_EN);
170 #endif
171
172 #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
173 clrbits32(&bcsr[4], BCSR4_ETH10_RST);
174 udelay(1000);
175 setbits32(&bcsr[4], BCSR4_ETH10_RST);
176
177 setbits32(&bcsr[1], BCSR1_ETHEN);
178
179 np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
180 #else
181 np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
182 #endif
183
184
185
186
187
188 if (np) {
189 of_detach_node(np);
190 of_node_put(np);
191 }
192 }
193
194 static int __init mpc885ads_probe(void)
195 {
196 return of_machine_is_compatible("fsl,mpc885ads");
197 }
198
199 static const struct of_device_id of_bus_ids[] __initconst = {
200 { .name = "soc", },
201 { .name = "cpm", },
202 { .name = "localbus", },
203 {},
204 };
205
206 static int __init declare_of_platform_devices(void)
207 {
208
209 of_platform_bus_probe(NULL, of_bus_ids, NULL);
210
211 return 0;
212 }
213 machine_device_initcall(mpc885_ads, declare_of_platform_devices);
214
215 define_machine(mpc885_ads) {
216 .name = "Freescale MPC885 ADS",
217 .probe = mpc885ads_probe,
218 .setup_arch = mpc885ads_setup_arch,
219 .init_IRQ = mpc8xx_pics_init,
220 .get_irq = mpc8xx_get_irq,
221 .restart = mpc8xx_restart,
222 .calibrate_decr = mpc8xx_calibrate_decr,
223 .progress = udbg_progress,
224 };