root/arch/powerpc/platforms/cell/spider-pci.c

DEFINITIONS

1. spiderpci_io_flush
2. SPIDER_PCI_MMIO_READ
3. spiderpci_pci_setup_chip
4. spiderpci_iowa_init

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * IO workarounds for PCI on Celleb/Cell platform
   4  *
   5  * (C) Copyright 2006-2007 TOSHIBA CORPORATION
   6  */
   7 
   8 #undef DEBUG
   9 
  10 #include <linux/kernel.h>
  11 #include <linux/of_platform.h>
  12 #include <linux/slab.h>
  13 #include <linux/io.h>
  14 
  15 #include <asm/ppc-pci.h>
  16 #include <asm/pci-bridge.h>
  17 #include <asm/io-workarounds.h>
  18 
  19 #define SPIDER_PCI_DISABLE_PREFETCH
  20 
  21 struct spiderpci_iowa_private {
  22         void __iomem *regs;
  23 };
  24 
  25 static void spiderpci_io_flush(struct iowa_bus *bus)
  26 {
  27         struct spiderpci_iowa_private *priv;
  28         u32 val;
  29 
  30         priv = bus->private;
  31         val = in_be32(priv->regs + SPIDER_PCI_DUMMY_READ);
  32         iosync();
  33 }
  34 
  35 #define SPIDER_PCI_MMIO_READ(name, ret)                                 \
  36 static ret spiderpci_##name(const PCI_IO_ADDR addr)                     \
  37 {                                                                       \
  38         ret val = __do_##name(addr);                                    \
  39         spiderpci_io_flush(iowa_mem_find_bus(addr));                    \
  40         return val;                                                     \
  41 }
  42 
  43 #define SPIDER_PCI_MMIO_READ_STR(name)                                  \
  44 static void spiderpci_##name(const PCI_IO_ADDR addr, void *buf,         \
  45                              unsigned long count)                       \
  46 {                                                                       \
  47         __do_##name(addr, buf, count);                                  \
  48         spiderpci_io_flush(iowa_mem_find_bus(addr));                    \
  49 }
  50 
  51 SPIDER_PCI_MMIO_READ(readb, u8)
  52 SPIDER_PCI_MMIO_READ(readw, u16)
  53 SPIDER_PCI_MMIO_READ(readl, u32)
  54 SPIDER_PCI_MMIO_READ(readq, u64)
  55 SPIDER_PCI_MMIO_READ(readw_be, u16)
  56 SPIDER_PCI_MMIO_READ(readl_be, u32)
  57 SPIDER_PCI_MMIO_READ(readq_be, u64)
  58 SPIDER_PCI_MMIO_READ_STR(readsb)
  59 SPIDER_PCI_MMIO_READ_STR(readsw)
  60 SPIDER_PCI_MMIO_READ_STR(readsl)
  61 
  62 static void spiderpci_memcpy_fromio(void *dest, const PCI_IO_ADDR src,
  63                                     unsigned long n)
  64 {
  65         __do_memcpy_fromio(dest, src, n);
  66         spiderpci_io_flush(iowa_mem_find_bus(src));
  67 }
  68 
  69 static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
  70                                            void __iomem *regs)
  71 {
  72         void *dummy_page_va;
  73         dma_addr_t dummy_page_da;
  74 
  75 #ifdef SPIDER_PCI_DISABLE_PREFETCH
  76         u32 val = in_be32(regs + SPIDER_PCI_VCI_CNTL_STAT);
  77         pr_debug("SPIDER_IOWA:PVCI_Control_Status was 0x%08x\n", val);
  78         out_be32(regs + SPIDER_PCI_VCI_CNTL_STAT, val | 0x8);
  79 #endif /* SPIDER_PCI_DISABLE_PREFETCH */
  80 
  81         /* setup dummy read */
  82         /*
  83          * On CellBlade, we can't know that which XDR memory is used by
  84          * kmalloc() to allocate dummy_page_va.
  85          * In order to imporve the performance, the XDR which is used to
  86          * allocate dummy_page_va is the nearest the spider-pci.
  87          * We have to select the CBE which is the nearest the spider-pci
  88          * to allocate memory from the best XDR, but I don't know that
  89          * how to do.
  90          *
  91          * Celleb does not have this problem, because it has only one XDR.
  92          */
  93         dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL);
  94         if (!dummy_page_va) {
  95                 pr_err("SPIDERPCI-IOWA:Alloc dummy_page_va failed.\n");
  96                 return -1;
  97         }
  98 
  99         dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
 100                                        PAGE_SIZE, DMA_FROM_DEVICE);
 101         if (dma_mapping_error(phb->parent, dummy_page_da)) {
 102                 pr_err("SPIDER-IOWA:Map dummy page filed.\n");
 103                 kfree(dummy_page_va);
 104                 return -1;
 105         }
 106 
 107         out_be32(regs + SPIDER_PCI_DUMMY_READ_BASE, dummy_page_da);
 108 
 109         return 0;
 110 }
 111 
 112 int __init spiderpci_iowa_init(struct iowa_bus *bus, void *data)
 113 {
 114         void __iomem *regs = NULL;
 115         struct spiderpci_iowa_private *priv;
 116         struct device_node *np = bus->phb->dn;
 117         struct resource r;
 118         unsigned long offset = (unsigned long)data;
 119 
 120         pr_debug("SPIDERPCI-IOWA:Bus initialize for spider(%pOF)\n",
 121                  np);
 122 
 123         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 124         if (!priv) {
 125                 pr_err("SPIDERPCI-IOWA:"
 126                        "Can't allocate struct spiderpci_iowa_private");
 127                 return -1;
 128         }
 129 
 130         if (of_address_to_resource(np, 0, &r)) {
 131                 pr_err("SPIDERPCI-IOWA:Can't get resource.\n");
 132                 goto error;
 133         }
 134 
 135         regs = ioremap(r.start + offset, SPIDER_PCI_REG_SIZE);
 136         if (!regs) {
 137                 pr_err("SPIDERPCI-IOWA:ioremap failed.\n");
 138                 goto error;
 139         }
 140         priv->regs = regs;
 141         bus->private = priv;
 142 
 143         if (spiderpci_pci_setup_chip(bus->phb, regs))
 144                 goto error;
 145 
 146         return 0;
 147 
 148 error:
 149         kfree(priv);
 150         bus->private = NULL;
 151 
 152         if (regs)
 153                 iounmap(regs);
 154 
 155         return -1;
 156 }
 157 
 158 struct ppc_pci_io spiderpci_ops = {
 159         .readb = spiderpci_readb,
 160         .readw = spiderpci_readw,
 161         .readl = spiderpci_readl,
 162         .readq = spiderpci_readq,
 163         .readw_be = spiderpci_readw_be,
 164         .readl_be = spiderpci_readl_be,
 165         .readq_be = spiderpci_readq_be,
 166         .readsb = spiderpci_readsb,
 167         .readsw = spiderpci_readsw,
 168         .readsl = spiderpci_readsl,
 169         .memcpy_fromio = spiderpci_memcpy_fromio,
 170 };
 171