This source file includes following definitions.
- scsi_is_sas_rphy
- sas_protocol_ata
- sas_port_put_phy
- scsi_is_sas_expander_device
1
2 #ifndef SCSI_TRANSPORT_SAS_H
3 #define SCSI_TRANSPORT_SAS_H
4
5 #include <linux/transport_class.h>
6 #include <linux/types.h>
7 #include <linux/mutex.h>
8 #include <scsi/sas.h>
9 #include <linux/bsg-lib.h>
10
11 struct scsi_transport_template;
12 struct sas_rphy;
13 struct request;
14
15 #if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
16 static inline int scsi_is_sas_rphy(const struct device *sdev)
17 {
18 return 0;
19 }
20 #else
21 extern int scsi_is_sas_rphy(const struct device *);
22 #endif
23
24 static inline int sas_protocol_ata(enum sas_protocol proto)
25 {
26 return ((proto & SAS_PROTOCOL_SATA) ||
27 (proto & SAS_PROTOCOL_STP))? 1 : 0;
28 }
29
30 enum sas_linkrate {
31
32 SAS_LINK_RATE_UNKNOWN = 0,
33 SAS_PHY_DISABLED = 1,
34 SAS_PHY_RESET_PROBLEM = 2,
35 SAS_SATA_SPINUP_HOLD = 3,
36 SAS_SATA_PORT_SELECTOR = 4,
37 SAS_PHY_RESET_IN_PROGRESS = 5,
38 SAS_LINK_RATE_1_5_GBPS = 8,
39 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
40 SAS_LINK_RATE_3_0_GBPS = 9,
41 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
42 SAS_LINK_RATE_6_0_GBPS = 10,
43 SAS_LINK_RATE_12_0_GBPS = 11,
44
45
46
47 SAS_LINK_RATE_FAILED = 0x10,
48 SAS_PHY_VIRTUAL = 0x11,
49 };
50
51 struct sas_identify {
52 enum sas_device_type device_type;
53 enum sas_protocol initiator_port_protocols;
54 enum sas_protocol target_port_protocols;
55 u64 sas_address;
56 u8 phy_identifier;
57 };
58
59 struct sas_phy {
60 struct device dev;
61 int number;
62 int enabled;
63
64
65 struct sas_identify identify;
66
67
68 enum sas_linkrate negotiated_linkrate;
69 enum sas_linkrate minimum_linkrate_hw;
70 enum sas_linkrate minimum_linkrate;
71 enum sas_linkrate maximum_linkrate_hw;
72 enum sas_linkrate maximum_linkrate;
73
74
75 u32 invalid_dword_count;
76 u32 running_disparity_error_count;
77 u32 loss_of_dword_sync_count;
78 u32 phy_reset_problem_count;
79
80
81 struct list_head port_siblings;
82
83
84 void *hostdata;
85 };
86
87 #define dev_to_phy(d) \
88 container_of((d), struct sas_phy, dev)
89 #define transport_class_to_phy(dev) \
90 dev_to_phy((dev)->parent)
91 #define phy_to_shost(phy) \
92 dev_to_shost((phy)->dev.parent)
93
94 struct request_queue;
95 struct sas_rphy {
96 struct device dev;
97 struct sas_identify identify;
98 struct list_head list;
99 struct request_queue *q;
100 u32 scsi_target_id;
101 };
102
103 #define dev_to_rphy(d) \
104 container_of((d), struct sas_rphy, dev)
105 #define transport_class_to_rphy(dev) \
106 dev_to_rphy((dev)->parent)
107 #define rphy_to_shost(rphy) \
108 dev_to_shost((rphy)->dev.parent)
109 #define target_to_rphy(targ) \
110 dev_to_rphy((targ)->dev.parent)
111
112 struct sas_end_device {
113 struct sas_rphy rphy;
114
115 unsigned ready_led_meaning:1;
116 unsigned tlr_supported:1;
117 unsigned tlr_enabled:1;
118
119 u16 I_T_nexus_loss_timeout;
120 u16 initiator_response_timeout;
121 };
122 #define rphy_to_end_device(r) \
123 container_of((r), struct sas_end_device, rphy)
124
125 struct sas_expander_device {
126 int level;
127 int next_port_id;
128
129 #define SAS_EXPANDER_VENDOR_ID_LEN 8
130 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
131 #define SAS_EXPANDER_PRODUCT_ID_LEN 16
132 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
133 #define SAS_EXPANDER_PRODUCT_REV_LEN 4
134 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
135 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
136 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
137 u16 component_id;
138 u8 component_revision_id;
139
140 struct sas_rphy rphy;
141
142 };
143 #define rphy_to_expander_device(r) \
144 container_of((r), struct sas_expander_device, rphy)
145
146 struct sas_port {
147 struct device dev;
148
149 int port_identifier;
150 int num_phys;
151
152 unsigned int is_backlink:1;
153
154
155 struct sas_rphy *rphy;
156
157 struct mutex phy_list_mutex;
158 struct list_head phy_list;
159 struct list_head del_list;
160 };
161
162 #define dev_to_sas_port(d) \
163 container_of((d), struct sas_port, dev)
164 #define transport_class_to_sas_port(dev) \
165 dev_to_sas_port((dev)->parent)
166
167 struct sas_phy_linkrates {
168 enum sas_linkrate maximum_linkrate;
169 enum sas_linkrate minimum_linkrate;
170 };
171
172
173 struct sas_function_template {
174 int (*get_linkerrors)(struct sas_phy *);
175 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
176 int (*get_bay_identifier)(struct sas_rphy *);
177 int (*phy_reset)(struct sas_phy *, int);
178 int (*phy_enable)(struct sas_phy *, int);
179 int (*phy_setup)(struct sas_phy *);
180 void (*phy_release)(struct sas_phy *);
181 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
182 void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
183 struct sas_rphy *);
184 };
185
186
187 void sas_remove_children(struct device *);
188 extern void sas_remove_host(struct Scsi_Host *);
189
190 extern struct sas_phy *sas_phy_alloc(struct device *, int);
191 extern void sas_phy_free(struct sas_phy *);
192 extern int sas_phy_add(struct sas_phy *);
193 extern void sas_phy_delete(struct sas_phy *);
194 extern int scsi_is_sas_phy(const struct device *);
195
196 u64 sas_get_address(struct scsi_device *);
197 unsigned int sas_tlr_supported(struct scsi_device *);
198 unsigned int sas_is_tlr_enabled(struct scsi_device *);
199 void sas_disable_tlr(struct scsi_device *);
200 void sas_enable_tlr(struct scsi_device *);
201
202 extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
203 extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
204 void sas_rphy_free(struct sas_rphy *);
205 extern int sas_rphy_add(struct sas_rphy *);
206 extern void sas_rphy_remove(struct sas_rphy *);
207 extern void sas_rphy_delete(struct sas_rphy *);
208 extern void sas_rphy_unlink(struct sas_rphy *);
209
210 struct sas_port *sas_port_alloc(struct device *, int);
211 struct sas_port *sas_port_alloc_num(struct device *);
212 int sas_port_add(struct sas_port *);
213 void sas_port_free(struct sas_port *);
214 void sas_port_delete(struct sas_port *);
215 void sas_port_add_phy(struct sas_port *, struct sas_phy *);
216 void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
217 void sas_port_mark_backlink(struct sas_port *);
218 int scsi_is_sas_port(const struct device *);
219 struct sas_phy *sas_port_get_phy(struct sas_port *port);
220 static inline void sas_port_put_phy(struct sas_phy *phy)
221 {
222 if (phy)
223 put_device(&phy->dev);
224 }
225
226 extern struct scsi_transport_template *
227 sas_attach_transport(struct sas_function_template *);
228 extern void sas_release_transport(struct scsi_transport_template *);
229 int sas_read_port_mode_page(struct scsi_device *);
230
231 static inline int
232 scsi_is_sas_expander_device(struct device *dev)
233 {
234 struct sas_rphy *rphy;
235 if (!scsi_is_sas_rphy(dev))
236 return 0;
237 rphy = dev_to_rphy(dev);
238 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
239 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
240 }
241
242 #define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
243
244 #endif