1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 /* atmdev.h - ATM device driver declarations and various related items */
3
4 /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
5
6
7 #ifndef _UAPILINUX_ATMDEV_H
8 #define _UAPILINUX_ATMDEV_H
9
10
11 #include <linux/atmapi.h>
12 #include <linux/atm.h>
13 #include <linux/atmioc.h>
14
15
16 #define ESI_LEN 6
17
18 #define ATM_OC3_PCR (155520000/270*260/8/53)
19 /* OC3 link rate: 155520000 bps
20 SONET overhead: /270*260 (9 section, 1 path)
21 bits per cell: /8/53
22 max cell rate: 353207.547 cells/sec */
23 #define ATM_25_PCR ((25600000/8-8000)/54)
24 /* 25 Mbps ATM cell rate (59111) */
25 #define ATM_OC12_PCR (622080000/1080*1040/8/53)
26 /* OC12 link rate: 622080000 bps
27 SONET overhead: /1080*1040
28 bits per cell: /8/53
29 max cell rate: 1412830.188 cells/sec */
30 #define ATM_DS3_PCR (8000*12)
31 /* DS3: 12 cells in a 125 usec time slot */
32
33
34 #define __AAL_STAT_ITEMS \
35 __HANDLE_ITEM(tx); /* TX okay */ \
36 __HANDLE_ITEM(tx_err); /* TX errors */ \
37 __HANDLE_ITEM(rx); /* RX okay */ \
38 __HANDLE_ITEM(rx_err); /* RX errors */ \
39 __HANDLE_ITEM(rx_drop); /* RX out of memory */
40
41 struct atm_aal_stats {
42 #define __HANDLE_ITEM(i) int i
43 __AAL_STAT_ITEMS
44 #undef __HANDLE_ITEM
45 };
46
47
48 struct atm_dev_stats {
49 struct atm_aal_stats aal0;
50 struct atm_aal_stats aal34;
51 struct atm_aal_stats aal5;
52 } __ATM_API_ALIGN;
53
54
55 #define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
56 /* get link rate */
57 #define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
58 /* get interface names (numbers) */
59 #define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
60 /* get interface type name */
61 #define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
62 /* get interface ESI */
63 #define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
64 /* get itf's local ATM addr. list */
65 #define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
66 /* reset itf's ATM address list */
67 #define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
68 /* add a local ATM address */
69 #define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
70 /* remove a local ATM address */
71 #define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
72 /* get connection identifier range */
73 #define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
74 /* set connection identifier range */
75 #define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
76 /* set interface ESI */
77 #define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
78 /* force interface ESI */
79 #define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
80 /* register a LECS address */
81 #define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
82 /* unregister a LECS address */
83 #define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
84 /* retrieve LECS address(es) */
85
86 #define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
87 /* get AAL layer statistics */
88 #define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
89 /* get AAL layer statistics and zero */
90 #define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
91 /* get loopback mode */
92 #define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
93 /* set loopback mode */
94 #define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
95 /* query supported loopback modes */
96 #define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
97 /* enable or disable single-copy */
98 #define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
99 /* set backend handler */
100 #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
101 /* use backend to make new if */
102 #define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
103 /* add party to p2mp call */
104 #ifdef CONFIG_COMPAT
105 /* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
106 #define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
107 #endif
108 #define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
109 /* drop party from p2mp call */
110
111 /*
112 * These are backend handkers that can be set via the ATM_SETBACKEND call
113 * above. In the future we may support dynamic loading of these - for now,
114 * they're just being used to share the ATMIOC_BACKEND ioctls
115 */
116 #define ATM_BACKEND_RAW 0
117 #define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
118 #define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
119
120 /* for ATM_GETTYPE */
121 #define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
122
123 /*
124 * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
125 */
126
127 /* Point of loopback CPU-->SAR-->PHY-->line--> ... */
128 #define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
129 #define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
130 #define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
131 /* RESERVED 4 loop back on PHY side ---' */
132 #define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
133 #define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
134
135 /* Direction of loopback */
136 #define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
137 #define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
138
139 #define __ATM_LM_XTLOC(n) ((n) & 0xff)
140 #define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
141
142 #define ATM_LM_NONE 0 /* no loopback */
143
144 #define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
145 #define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
146 #define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
147 #define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
148
149 #define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
150 #define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
151 #define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
152 #define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
153
154 /*
155 * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
156 * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
157 */
158
159
160 struct atm_iobuf {
161 int length;
162 void __user *buffer;
163 };
164
165 /* for ATM_GETCIRANGE / ATM_SETCIRANGE */
166
167 #define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
168
169 struct atm_cirange {
170 signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
171 signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
172 };
173
174 /* for ATM_SETSC; actually taken from the ATM_VF number space */
175
176 #define ATM_SC_RX 1024 /* enable RX single-copy */
177 #define ATM_SC_TX 2048 /* enable TX single-copy */
178
179 #define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
180 anyway */
181
182 /* MF: change_qos (Modify) flags */
183
184 #define ATM_MF_IMMED 1 /* Block until change is effective */
185 #define ATM_MF_INC_RSV 2 /* Change reservation on increase */
186 #define ATM_MF_INC_SHP 4 /* Change shaping on increase */
187 #define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
188 #define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
189 #define ATM_MF_BWD 32 /* Set the backward direction parameters */
190
191 #define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
192 ATM_MF_DEC_SHP | ATM_MF_BWD)
193
194 /*
195 * ATM_VS_* are used to express VC state in a human-friendly way.
196 */
197
198 #define ATM_VS_IDLE 0 /* VC is not used */
199 #define ATM_VS_CONNECTED 1 /* VC is connected */
200 #define ATM_VS_CLOSING 2 /* VC is closing */
201 #define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
202 #define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
203 #define ATM_VS_BOUND 5 /* VC is bound */
204
205 #define ATM_VS2TXT_MAP \
206 "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
207
208 #define ATM_VF2TXT_MAP \
209 "ADDR", "READY", "PARTIAL", "REGIS", \
210 "RELEASED", "HASQOS", "LISTEN", "META", \
211 "256", "512", "1024", "2048", \
212 "SESSION", "HASSAP", "BOUND", "CLOSE"
213
214
215
216 #endif /* _UAPILINUX_ATMDEV_H */