root/include/uapi/linux/can/error.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 /* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
   2 /*
   3  * linux/can/error.h
   4  *
   5  * Definitions of the CAN error messages to be filtered and passed to the user.
   6  *
   7  * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
   8  * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions and the following disclaimer.
  16  * 2. Redistributions in binary form must reproduce the above copyright
  17  *    notice, this list of conditions and the following disclaimer in the
  18  *    documentation and/or other materials provided with the distribution.
  19  * 3. Neither the name of Volkswagen nor the names of its contributors
  20  *    may be used to endorse or promote products derived from this software
  21  *    without specific prior written permission.
  22  *
  23  * Alternatively, provided that this notice is retained in full, this
  24  * software may be distributed under the terms of the GNU General
  25  * Public License ("GPL") version 2, in which case the provisions of the
  26  * GPL apply INSTEAD OF those given above.
  27  *
  28  * The provided data structures and external interfaces from this code
  29  * are not restricted to be used by modules with a GPL compatible license.
  30  *
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  36  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  37  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  38  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  39  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  40  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  41  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  42  * DAMAGE.
  43  */
  44 
  45 #ifndef _UAPI_CAN_ERROR_H
  46 #define _UAPI_CAN_ERROR_H
  47 
  48 #define CAN_ERR_DLC 8 /* dlc for error message frames */
  49 
  50 /* error class (mask) in can_id */
  51 #define CAN_ERR_TX_TIMEOUT   0x00000001U /* TX timeout (by netdevice driver) */
  52 #define CAN_ERR_LOSTARB      0x00000002U /* lost arbitration    / data[0]    */
  53 #define CAN_ERR_CRTL         0x00000004U /* controller problems / data[1]    */
  54 #define CAN_ERR_PROT         0x00000008U /* protocol violations / data[2..3] */
  55 #define CAN_ERR_TRX          0x00000010U /* transceiver status  / data[4]    */
  56 #define CAN_ERR_ACK          0x00000020U /* received no ACK on transmission */
  57 #define CAN_ERR_BUSOFF       0x00000040U /* bus off */
  58 #define CAN_ERR_BUSERROR     0x00000080U /* bus error (may flood!) */
  59 #define CAN_ERR_RESTARTED    0x00000100U /* controller restarted */
  60 
  61 /* arbitration lost in bit ... / data[0] */
  62 #define CAN_ERR_LOSTARB_UNSPEC   0x00 /* unspecified */
  63                                       /* else bit number in bitstream */
  64 
  65 /* error status of CAN-controller / data[1] */
  66 #define CAN_ERR_CRTL_UNSPEC      0x00 /* unspecified */
  67 #define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
  68 #define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
  69 #define CAN_ERR_CRTL_RX_WARNING  0x04 /* reached warning level for RX errors */
  70 #define CAN_ERR_CRTL_TX_WARNING  0x08 /* reached warning level for TX errors */
  71 #define CAN_ERR_CRTL_RX_PASSIVE  0x10 /* reached error passive status RX */
  72 #define CAN_ERR_CRTL_TX_PASSIVE  0x20 /* reached error passive status TX */
  73                                       /* (at least one error counter exceeds */
  74                                       /* the protocol-defined level of 127)  */
  75 #define CAN_ERR_CRTL_ACTIVE      0x40 /* recovered to error active state */
  76 
  77 /* error in CAN protocol (type) / data[2] */
  78 #define CAN_ERR_PROT_UNSPEC      0x00 /* unspecified */
  79 #define CAN_ERR_PROT_BIT         0x01 /* single bit error */
  80 #define CAN_ERR_PROT_FORM        0x02 /* frame format error */
  81 #define CAN_ERR_PROT_STUFF       0x04 /* bit stuffing error */
  82 #define CAN_ERR_PROT_BIT0        0x08 /* unable to send dominant bit */
  83 #define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
  84 #define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
  85 #define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
  86 #define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
  87 
  88 /* error in CAN protocol (location) / data[3] */
  89 #define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
  90 #define CAN_ERR_PROT_LOC_SOF     0x03 /* start of frame */
  91 #define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
  92 #define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
  93 #define CAN_ERR_PROT_LOC_SRTR    0x04 /* substitute RTR (SFF: RTR) */
  94 #define CAN_ERR_PROT_LOC_IDE     0x05 /* identifier extension */
  95 #define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
  96 #define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
  97 #define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
  98 #define CAN_ERR_PROT_LOC_RTR     0x0C /* RTR */
  99 #define CAN_ERR_PROT_LOC_RES1    0x0D /* reserved bit 1 */
 100 #define CAN_ERR_PROT_LOC_RES0    0x09 /* reserved bit 0 */
 101 #define CAN_ERR_PROT_LOC_DLC     0x0B /* data length code */
 102 #define CAN_ERR_PROT_LOC_DATA    0x0A /* data section */
 103 #define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
 104 #define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
 105 #define CAN_ERR_PROT_LOC_ACK     0x19 /* ACK slot */
 106 #define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
 107 #define CAN_ERR_PROT_LOC_EOF     0x1A /* end of frame */
 108 #define CAN_ERR_PROT_LOC_INTERM  0x12 /* intermission */
 109 
 110 /* error status of CAN-transceiver / data[4] */
 111 /*                                             CANH CANL */
 112 #define CAN_ERR_TRX_UNSPEC             0x00 /* 0000 0000 */
 113 #define CAN_ERR_TRX_CANH_NO_WIRE       0x04 /* 0000 0100 */
 114 #define CAN_ERR_TRX_CANH_SHORT_TO_BAT  0x05 /* 0000 0101 */
 115 #define CAN_ERR_TRX_CANH_SHORT_TO_VCC  0x06 /* 0000 0110 */
 116 #define CAN_ERR_TRX_CANH_SHORT_TO_GND  0x07 /* 0000 0111 */
 117 #define CAN_ERR_TRX_CANL_NO_WIRE       0x40 /* 0100 0000 */
 118 #define CAN_ERR_TRX_CANL_SHORT_TO_BAT  0x50 /* 0101 0000 */
 119 #define CAN_ERR_TRX_CANL_SHORT_TO_VCC  0x60 /* 0110 0000 */
 120 #define CAN_ERR_TRX_CANL_SHORT_TO_GND  0x70 /* 0111 0000 */
 121 #define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
 122 
 123 /* controller specific additional information / data[5..7] */
 124 
 125 #endif /* _UAPI_CAN_ERROR_H */

/* [<][>][^][v][top][bottom][index][help] */