root/include/linux/reset/bcm63xx_pmb.h

INCLUDED FROM

DEFINITIONS

1. __bpcm_do_op
2. bpcm_rd
3. bpcm_wr

   1 /*
   2  * Broadcom BCM63xx Processor Monitor Bus shared routines (SMP and reset)
   3  *
   4  * Copyright (C) 2015, Broadcom Corporation
   5  * Author: Florian Fainelli <f.fainelli@gmail.com>
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation version 2.
  10  *
  11  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  12  * kind, whether express or implied; without even the implied warranty
  13  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16 #ifndef __BCM63XX_PMB_H
  17 #define __BCM63XX_PMB_H
  18 
  19 #include <linux/io.h>
  20 #include <linux/types.h>
  21 #include <linux/delay.h>
  22 #include <linux/err.h>
  23 
  24 /* PMB Master controller register */
  25 #define PMB_CTRL                0x00
  26 #define  PMC_PMBM_START         (1 << 31)
  27 #define  PMC_PMBM_TIMEOUT       (1 << 30)
  28 #define  PMC_PMBM_SLAVE_ERR     (1 << 29)
  29 #define  PMC_PMBM_BUSY          (1 << 28)
  30 #define  PMC_PMBM_READ          (0 << 20)
  31 #define  PMC_PMBM_WRITE         (1 << 20)
  32 #define PMB_WR_DATA             0x04
  33 #define PMB_TIMEOUT             0x08
  34 #define PMB_RD_DATA             0x0C
  35 
  36 #define PMB_BUS_ID_SHIFT        8
  37 
  38 /* Perform the low-level PMB master operation, shared between reads and
  39  * writes.
  40  */
  41 static inline int __bpcm_do_op(void __iomem *master, unsigned int addr,
  42                                u32 off, u32 op)
  43 {
  44         unsigned int timeout = 1000;
  45         u32 cmd;
  46 
  47         cmd = (PMC_PMBM_START | op | (addr & 0xff) << 12 | off);
  48         writel(cmd, master + PMB_CTRL);
  49         do {
  50                 cmd = readl(master + PMB_CTRL);
  51                 if (!(cmd & PMC_PMBM_START))
  52                         return 0;
  53 
  54                 if (cmd & PMC_PMBM_SLAVE_ERR)
  55                         return -EIO;
  56 
  57                 if (cmd & PMC_PMBM_TIMEOUT)
  58                         return -ETIMEDOUT;
  59 
  60                 udelay(1);
  61         } while (timeout-- > 0);
  62 
  63         return -ETIMEDOUT;
  64 }
  65 
  66 static inline int bpcm_rd(void __iomem *master, unsigned int addr,
  67                           u32 off, u32 *val)
  68 {
  69         int ret = 0;
  70 
  71         ret = __bpcm_do_op(master, addr, off >> 2, PMC_PMBM_READ);
  72         *val = readl(master + PMB_RD_DATA);
  73 
  74         return ret;
  75 }
  76 
  77 static inline int bpcm_wr(void __iomem *master, unsigned int addr,
  78                           u32 off, u32 val)
  79 {
  80         int ret = 0;
  81 
  82         writel(val, master + PMB_WR_DATA);
  83         ret = __bpcm_do_op(master, addr, off >> 2, PMC_PMBM_WRITE);
  84 
  85         return ret;
  86 }
  87 
  88 #endif /* __BCM63XX_PMB_H */