root/include/linux/rcu_node_tree.h

INCLUDED FROM

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * RCU node combining tree definitions.  These are used to compute
   4  * global attributes while avoiding common-case global contention.  A key
   5  * property that these computations rely on is a tournament-style approach
   6  * where only one of the tasks contending a lower level in the tree need
   7  * advance to the next higher level.  If properly configured, this allows
   8  * unlimited scalability while maintaining a constant level of contention
   9  * on the root node.
  10  *
  11  * This seemingly RCU-private file must be available to SRCU users
  12  * because the size of the TREE SRCU srcu_struct structure depends
  13  * on these definitions.
  14  *
  15  * Copyright IBM Corporation, 2017
  16  *
  17  * Author: Paul E. McKenney <paulmck@linux.ibm.com>
  18  */
  19 
  20 #ifndef __LINUX_RCU_NODE_TREE_H
  21 #define __LINUX_RCU_NODE_TREE_H
  22 
  23 /*
  24  * Define shape of hierarchy based on NR_CPUS, CONFIG_RCU_FANOUT, and
  25  * CONFIG_RCU_FANOUT_LEAF.
  26  * In theory, it should be possible to add more levels straightforwardly.
  27  * In practice, this did work well going from three levels to four.
  28  * Of course, your mileage may vary.
  29  */
  30 
  31 #ifdef CONFIG_RCU_FANOUT
  32 #define RCU_FANOUT CONFIG_RCU_FANOUT
  33 #else /* #ifdef CONFIG_RCU_FANOUT */
  34 # ifdef CONFIG_64BIT
  35 # define RCU_FANOUT 64
  36 # else
  37 # define RCU_FANOUT 32
  38 # endif
  39 #endif /* #else #ifdef CONFIG_RCU_FANOUT */
  40 
  41 #ifdef CONFIG_RCU_FANOUT_LEAF
  42 #define RCU_FANOUT_LEAF CONFIG_RCU_FANOUT_LEAF
  43 #else /* #ifdef CONFIG_RCU_FANOUT_LEAF */
  44 #define RCU_FANOUT_LEAF 16
  45 #endif /* #else #ifdef CONFIG_RCU_FANOUT_LEAF */
  46 
  47 #define RCU_FANOUT_1          (RCU_FANOUT_LEAF)
  48 #define RCU_FANOUT_2          (RCU_FANOUT_1 * RCU_FANOUT)
  49 #define RCU_FANOUT_3          (RCU_FANOUT_2 * RCU_FANOUT)
  50 #define RCU_FANOUT_4          (RCU_FANOUT_3 * RCU_FANOUT)
  51 
  52 #if NR_CPUS <= RCU_FANOUT_1
  53 #  define RCU_NUM_LVLS        1
  54 #  define NUM_RCU_LVL_0       1
  55 #  define NUM_RCU_NODES       NUM_RCU_LVL_0
  56 #  define NUM_RCU_LVL_INIT    { NUM_RCU_LVL_0 }
  57 #  define RCU_NODE_NAME_INIT  { "rcu_node_0" }
  58 #  define RCU_FQS_NAME_INIT   { "rcu_node_fqs_0" }
  59 #elif NR_CPUS <= RCU_FANOUT_2
  60 #  define RCU_NUM_LVLS        2
  61 #  define NUM_RCU_LVL_0       1
  62 #  define NUM_RCU_LVL_1       DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
  63 #  define NUM_RCU_NODES       (NUM_RCU_LVL_0 + NUM_RCU_LVL_1)
  64 #  define NUM_RCU_LVL_INIT    { NUM_RCU_LVL_0, NUM_RCU_LVL_1 }
  65 #  define RCU_NODE_NAME_INIT  { "rcu_node_0", "rcu_node_1" }
  66 #  define RCU_FQS_NAME_INIT   { "rcu_node_fqs_0", "rcu_node_fqs_1" }
  67 #elif NR_CPUS <= RCU_FANOUT_3
  68 #  define RCU_NUM_LVLS        3
  69 #  define NUM_RCU_LVL_0       1
  70 #  define NUM_RCU_LVL_1       DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
  71 #  define NUM_RCU_LVL_2       DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
  72 #  define NUM_RCU_NODES       (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2)
  73 #  define NUM_RCU_LVL_INIT    { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2 }
  74 #  define RCU_NODE_NAME_INIT  { "rcu_node_0", "rcu_node_1", "rcu_node_2" }
  75 #  define RCU_FQS_NAME_INIT   { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2" }
  76 #elif NR_CPUS <= RCU_FANOUT_4
  77 #  define RCU_NUM_LVLS        4
  78 #  define NUM_RCU_LVL_0       1
  79 #  define NUM_RCU_LVL_1       DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_3)
  80 #  define NUM_RCU_LVL_2       DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
  81 #  define NUM_RCU_LVL_3       DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
  82 #  define NUM_RCU_NODES       (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
  83 #  define NUM_RCU_LVL_INIT    { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2, NUM_RCU_LVL_3 }
  84 #  define RCU_NODE_NAME_INIT  { "rcu_node_0", "rcu_node_1", "rcu_node_2", "rcu_node_3" }
  85 #  define RCU_FQS_NAME_INIT   { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2", "rcu_node_fqs_3" }
  86 #else
  87 # error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
  88 #endif /* #if (NR_CPUS) <= RCU_FANOUT_1 */
  89 
  90 #endif /* __LINUX_RCU_NODE_TREE_H */