root/drivers/net/ethernet/qualcomm/emac/emac-phy.c

DEFINITIONS

1. emac_mdio_read
2. emac_mdio_write
3. emac_phy_config

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
   3  */
   4 
   5 /* Qualcomm Technologies, Inc. EMAC PHY Controller driver.
   6  */
   7 
   8 #include <linux/of_mdio.h>
   9 #include <linux/phy.h>
  10 #include <linux/iopoll.h>
  11 #include <linux/acpi.h>
  12 #include "emac.h"
  13 
  14 /* EMAC base register offsets */
  15 #define EMAC_MDIO_CTRL                                        0x001414
  16 #define EMAC_PHY_STS                                          0x001418
  17 #define EMAC_MDIO_EX_CTRL                                     0x001440
  18 
  19 /* EMAC_MDIO_CTRL */
  20 #define MDIO_MODE                                              BIT(30)
  21 #define MDIO_PR                                                BIT(29)
  22 #define MDIO_AP_EN                                             BIT(28)
  23 #define MDIO_BUSY                                              BIT(27)
  24 #define MDIO_CLK_SEL_BMSK                                    0x7000000
  25 #define MDIO_CLK_SEL_SHFT                                           24
  26 #define MDIO_START                                             BIT(23)
  27 #define SUP_PREAMBLE                                           BIT(22)
  28 #define MDIO_RD_NWR                                            BIT(21)
  29 #define MDIO_REG_ADDR_BMSK                                    0x1f0000
  30 #define MDIO_REG_ADDR_SHFT                                          16
  31 #define MDIO_DATA_BMSK                                          0xffff
  32 #define MDIO_DATA_SHFT                                               0
  33 
  34 /* EMAC_PHY_STS */
  35 #define PHY_ADDR_BMSK                                         0x1f0000
  36 #define PHY_ADDR_SHFT                                               16
  37 
  38 #define MDIO_CLK_25_4                                                0
  39 #define MDIO_CLK_25_28                                               7
  40 
  41 #define MDIO_WAIT_TIMES                                           1000
  42 #define MDIO_STATUS_DELAY_TIME                                       1
  43 
  44 static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum)
  45 {
  46         struct emac_adapter *adpt = bus->priv;
  47         u32 reg;
  48 
  49         emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK,
  50                           (addr << PHY_ADDR_SHFT));
  51 
  52         reg = SUP_PREAMBLE |
  53               ((MDIO_CLK_25_4 << MDIO_CLK_SEL_SHFT) & MDIO_CLK_SEL_BMSK) |
  54               ((regnum << MDIO_REG_ADDR_SHFT) & MDIO_REG_ADDR_BMSK) |
  55               MDIO_START | MDIO_RD_NWR;
  56 
  57         writel(reg, adpt->base + EMAC_MDIO_CTRL);
  58 
  59         if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg,
  60                                !(reg & (MDIO_START | MDIO_BUSY)),
  61                                MDIO_STATUS_DELAY_TIME, MDIO_WAIT_TIMES * 100))
  62                 return -EIO;
  63 
  64         return (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK;
  65 }
  66 
  67 static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
  68 {
  69         struct emac_adapter *adpt = bus->priv;
  70         u32 reg;
  71 
  72         emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK,
  73                           (addr << PHY_ADDR_SHFT));
  74 
  75         reg = SUP_PREAMBLE |
  76                 ((MDIO_CLK_25_4 << MDIO_CLK_SEL_SHFT) & MDIO_CLK_SEL_BMSK) |
  77                 ((regnum << MDIO_REG_ADDR_SHFT) & MDIO_REG_ADDR_BMSK) |
  78                 ((val << MDIO_DATA_SHFT) & MDIO_DATA_BMSK) |
  79                 MDIO_START;
  80 
  81         writel(reg, adpt->base + EMAC_MDIO_CTRL);
  82 
  83         if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg,
  84                                !(reg & (MDIO_START | MDIO_BUSY)),
  85                                MDIO_STATUS_DELAY_TIME, MDIO_WAIT_TIMES * 100))
  86                 return -EIO;
  87 
  88         return 0;
  89 }
  90 
  91 /* Configure the MDIO bus and connect the external PHY */
  92 int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
  93 {
  94         struct device_node *np = pdev->dev.of_node;
  95         struct mii_bus *mii_bus;
  96         int ret;
  97 
  98         /* Create the mii_bus object for talking to the MDIO bus */
  99         adpt->mii_bus = mii_bus = devm_mdiobus_alloc(&pdev->dev);
 100         if (!mii_bus)
 101                 return -ENOMEM;
 102 
 103         mii_bus->name = "emac-mdio";
 104         snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
 105         mii_bus->read = emac_mdio_read;
 106         mii_bus->write = emac_mdio_write;
 107         mii_bus->parent = &pdev->dev;
 108         mii_bus->priv = adpt;
 109 
 110         if (has_acpi_companion(&pdev->dev)) {
 111                 u32 phy_addr;
 112 
 113                 ret = mdiobus_register(mii_bus);
 114                 if (ret) {
 115                         dev_err(&pdev->dev, "could not register mdio bus\n");
 116                         return ret;
 117                 }
 118                 ret = device_property_read_u32(&pdev->dev, "phy-channel",
 119                                                &phy_addr);
 120                 if (ret)
 121                         /* If we can't read a valid phy address, then assume
 122                          * that there is only one phy on this mdio bus.
 123                          */
 124                         adpt->phydev = phy_find_first(mii_bus);
 125                 else
 126                         adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr);
 127 
 128                 /* of_phy_find_device() claims a reference to the phydev,
 129                  * so we do that here manually as well. When the driver
 130                  * later unloads, it can unilaterally drop the reference
 131                  * without worrying about ACPI vs DT.
 132                  */
 133                 if (adpt->phydev)
 134                         get_device(&adpt->phydev->mdio.dev);
 135         } else {
 136                 struct device_node *phy_np;
 137 
 138                 ret = of_mdiobus_register(mii_bus, np);
 139                 if (ret) {
 140                         dev_err(&pdev->dev, "could not register mdio bus\n");
 141                         return ret;
 142                 }
 143 
 144                 phy_np = of_parse_phandle(np, "phy-handle", 0);
 145                 adpt->phydev = of_phy_find_device(phy_np);
 146                 of_node_put(phy_np);
 147         }
 148 
 149         if (!adpt->phydev) {
 150                 dev_err(&pdev->dev, "could not find external phy\n");
 151                 mdiobus_unregister(mii_bus);
 152                 return -ENODEV;
 153         }
 154 
 155         return 0;
 156 }