root/drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. fm10k_dcbnl_ieee_getets
  2. fm10k_dcbnl_ieee_setets
  3. fm10k_dcbnl_ieee_getpfc
  4. fm10k_dcbnl_ieee_setpfc
  5. fm10k_dcbnl_getdcbx
  6. fm10k_dcbnl_setdcbx
  7. fm10k_dcbnl_set_ops

   1 // SPDX-License-Identifier: GPL-2.0
   2 /* Copyright(c) 2013 - 2019 Intel Corporation. */
   3 
   4 #include "fm10k.h"
   5 
   6 /**
   7  * fm10k_dcbnl_ieee_getets - get the ETS configuration for the device
   8  * @dev: netdev interface for the device
   9  * @ets: ETS structure to push configuration to
  10  **/
  11 static int fm10k_dcbnl_ieee_getets(struct net_device *dev, struct ieee_ets *ets)
  12 {
  13         int i;
  14 
  15         /* we support 8 TCs in all modes */
  16         ets->ets_cap = IEEE_8021QAZ_MAX_TCS;
  17         ets->cbs = 0;
  18 
  19         /* we only support strict priority and cannot do traffic shaping */
  20         memset(ets->tc_tx_bw, 0, sizeof(ets->tc_tx_bw));
  21         memset(ets->tc_rx_bw, 0, sizeof(ets->tc_rx_bw));
  22         memset(ets->tc_tsa, IEEE_8021QAZ_TSA_STRICT, sizeof(ets->tc_tsa));
  23 
  24         /* populate the prio map based on the netdev */
  25         for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
  26                 ets->prio_tc[i] = netdev_get_prio_tc_map(dev, i);
  27 
  28         return 0;
  29 }
  30 
  31 /**
  32  * fm10k_dcbnl_ieee_setets - set the ETS configuration for the device
  33  * @dev: netdev interface for the device
  34  * @ets: ETS structure to pull configuration from
  35  **/
  36 static int fm10k_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets)
  37 {
  38         u8 num_tc = 0;
  39         int i;
  40 
  41         /* verify type and determine num_tcs needed */
  42         for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
  43                 if (ets->tc_tx_bw[i] || ets->tc_rx_bw[i])
  44                         return -EINVAL;
  45                 if (ets->tc_tsa[i] != IEEE_8021QAZ_TSA_STRICT)
  46                         return -EINVAL;
  47                 if (ets->prio_tc[i] > num_tc)
  48                         num_tc = ets->prio_tc[i];
  49         }
  50 
  51         /* if requested TC is greater than 0 then num_tcs is max + 1 */
  52         if (num_tc)
  53                 num_tc++;
  54 
  55         if (num_tc > IEEE_8021QAZ_MAX_TCS)
  56                 return -EINVAL;
  57 
  58         /* update TC hardware mapping if necessary */
  59         if (num_tc != netdev_get_num_tc(dev)) {
  60                 int err = fm10k_setup_tc(dev, num_tc);
  61                 if (err)
  62                         return err;
  63         }
  64 
  65         /* update priority mapping */
  66         for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
  67                 netdev_set_prio_tc_map(dev, i, ets->prio_tc[i]);
  68 
  69         return 0;
  70 }
  71 
  72 /**
  73  * fm10k_dcbnl_ieee_getpfc - get the PFC configuration for the device
  74  * @dev: netdev interface for the device
  75  * @pfc: PFC structure to push configuration to
  76  **/
  77 static int fm10k_dcbnl_ieee_getpfc(struct net_device *dev, struct ieee_pfc *pfc)
  78 {
  79         struct fm10k_intfc *interface = netdev_priv(dev);
  80 
  81         /* record flow control max count and state of TCs */
  82         pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS;
  83         pfc->pfc_en = interface->pfc_en;
  84 
  85         return 0;
  86 }
  87 
  88 /**
  89  * fm10k_dcbnl_ieee_setpfc - set the PFC configuration for the device
  90  * @dev: netdev interface for the device
  91  * @pfc: PFC structure to pull configuration from
  92  **/
  93 static int fm10k_dcbnl_ieee_setpfc(struct net_device *dev, struct ieee_pfc *pfc)
  94 {
  95         struct fm10k_intfc *interface = netdev_priv(dev);
  96 
  97         /* record PFC configuration to interface */
  98         interface->pfc_en = pfc->pfc_en;
  99 
 100         /* if we are running update the drop_en state for all queues */
 101         if (netif_running(dev))
 102                 fm10k_update_rx_drop_en(interface);
 103 
 104         return 0;
 105 }
 106 
 107 /**
 108  * fm10k_dcbnl_ieee_getdcbx - get the DCBX configuration for the device
 109  * @dev: netdev interface for the device
 110  *
 111  * Returns that we support only IEEE DCB for this interface
 112  **/
 113 static u8 fm10k_dcbnl_getdcbx(struct net_device __always_unused *dev)
 114 {
 115         return DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE;
 116 }
 117 
 118 /**
 119  * fm10k_dcbnl_ieee_setdcbx - get the DCBX configuration for the device
 120  * @dev: netdev interface for the device
 121  * @mode: new mode for this device
 122  *
 123  * Returns error on attempt to enable anything but IEEE DCB for this interface
 124  **/
 125 static u8 fm10k_dcbnl_setdcbx(struct net_device __always_unused *dev, u8 mode)
 126 {
 127         return (mode != (DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE)) ? 1 : 0;
 128 }
 129 
 130 static const struct dcbnl_rtnl_ops fm10k_dcbnl_ops = {
 131         .ieee_getets    = fm10k_dcbnl_ieee_getets,
 132         .ieee_setets    = fm10k_dcbnl_ieee_setets,
 133         .ieee_getpfc    = fm10k_dcbnl_ieee_getpfc,
 134         .ieee_setpfc    = fm10k_dcbnl_ieee_setpfc,
 135 
 136         .getdcbx        = fm10k_dcbnl_getdcbx,
 137         .setdcbx        = fm10k_dcbnl_setdcbx,
 138 };
 139 
 140 /**
 141  * fm10k_dcbnl_set_ops - Configures dcbnl ops pointer for netdev
 142  * @dev: netdev interface for the device
 143  *
 144  * Enables PF for DCB by assigning DCBNL ops pointer.
 145  **/
 146 void fm10k_dcbnl_set_ops(struct net_device *dev)
 147 {
 148         struct fm10k_intfc *interface = netdev_priv(dev);
 149         struct fm10k_hw *hw = &interface->hw;
 150 
 151         if (hw->mac.type == fm10k_mac_pf)
 152                 dev->dcbnl_ops = &fm10k_dcbnl_ops;
 153 }

/* [<][>][^][v][top][bottom][index][help] */