1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * Copyright (C) 2004-2013 Synopsys, Inc. (www.synopsys.com)
4 *
5 * Registers and bits definitions of ARC EMAC
6 */
7
8 #ifndef ARC_EMAC_H
9 #define ARC_EMAC_H
10
11 #include <linux/device.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/netdevice.h>
14 #include <linux/phy.h>
15 #include <linux/clk.h>
16
17 /* STATUS and ENABLE Register bit masks */
18 #define TXINT_MASK (1 << 0) /* Transmit interrupt */
19 #define RXINT_MASK (1 << 1) /* Receive interrupt */
20 #define ERR_MASK (1 << 2) /* Error interrupt */
21 #define TXCH_MASK (1 << 3) /* Transmit chaining error interrupt */
22 #define MSER_MASK (1 << 4) /* Missed packet counter error */
23 #define RXCR_MASK (1 << 8) /* RXCRCERR counter rolled over */
24 #define RXFR_MASK (1 << 9) /* RXFRAMEERR counter rolled over */
25 #define RXFL_MASK (1 << 10) /* RXOFLOWERR counter rolled over */
26 #define MDIO_MASK (1 << 12) /* MDIO complete interrupt */
27 #define TXPL_MASK (1 << 31) /* Force polling of BD by EMAC */
28
29 /* CONTROL Register bit masks */
30 #define EN_MASK (1 << 0) /* VMAC enable */
31 #define TXRN_MASK (1 << 3) /* TX enable */
32 #define RXRN_MASK (1 << 4) /* RX enable */
33 #define DSBC_MASK (1 << 8) /* Disable receive broadcast */
34 #define ENFL_MASK (1 << 10) /* Enable Full-duplex */
35 #define PROM_MASK (1 << 11) /* Promiscuous mode */
36
37 /* Buffer descriptor INFO bit masks */
38 #define OWN_MASK (1 << 31) /* 0-CPU or 1-EMAC owns buffer */
39 #define FIRST_MASK (1 << 16) /* First buffer in chain */
40 #define LAST_MASK (1 << 17) /* Last buffer in chain */
41 #define LEN_MASK 0x000007FF /* last 11 bits */
42 #define CRLS (1 << 21)
43 #define DEFR (1 << 22)
44 #define DROP (1 << 23)
45 #define RTRY (1 << 24)
46 #define LTCL (1 << 28)
47 #define UFLO (1 << 29)
48
49 #define FOR_EMAC OWN_MASK
50 #define FOR_CPU 0
51
52 /* ARC EMAC register set combines entries for MAC and MDIO */
53 enum {
54 R_ID = 0,
55 R_STATUS,
56 R_ENABLE,
57 R_CTRL,
58 R_POLLRATE,
59 R_RXERR,
60 R_MISS,
61 R_TX_RING,
62 R_RX_RING,
63 R_ADDRL,
64 R_ADDRH,
65 R_LAFL,
66 R_LAFH,
67 R_MDIO,
68 };
69
70 #define TX_TIMEOUT (400 * HZ / 1000) /* Transmission timeout */
71
72 #define ARC_EMAC_NAPI_WEIGHT 40 /* Workload for NAPI */
73
74 #define EMAC_BUFFER_SIZE 1536 /* EMAC buffer size */
75
76 /**
77 * struct arc_emac_bd - EMAC buffer descriptor (BD).
78 *
79 * @info: Contains status information on the buffer itself.
80 * @data: 32-bit byte addressable pointer to the packet data.
81 */
82 struct arc_emac_bd {
83 __le32 info;
84 dma_addr_t data;
85 };
86
87 /* Number of Rx/Tx BD's */
88 #define RX_BD_NUM 128
89 #define TX_BD_NUM 128
90
91 #define RX_RING_SZ (RX_BD_NUM * sizeof(struct arc_emac_bd))
92 #define TX_RING_SZ (TX_BD_NUM * sizeof(struct arc_emac_bd))
93
94 /**
95 * struct buffer_state - Stores Rx/Tx buffer state.
96 * @sk_buff: Pointer to socket buffer.
97 * @addr: Start address of DMA-mapped memory region.
98 * @len: Length of DMA-mapped memory region.
99 */
100 struct buffer_state {
101 struct sk_buff *skb;
102 DEFINE_DMA_UNMAP_ADDR(addr);
103 DEFINE_DMA_UNMAP_LEN(len);
104 };
105
106 struct arc_emac_mdio_bus_data {
107 struct gpio_desc *reset_gpio;
108 int msec;
109 };
110
111 /**
112 * struct arc_emac_priv - Storage of EMAC's private information.
113 * @dev: Pointer to the current device.
114 * @phy_dev: Pointer to attached PHY device.
115 * @bus: Pointer to the current MII bus.
116 * @regs: Base address of EMAC memory-mapped control registers.
117 * @napi: Structure for NAPI.
118 * @rxbd: Pointer to Rx BD ring.
119 * @txbd: Pointer to Tx BD ring.
120 * @rxbd_dma: DMA handle for Rx BD ring.
121 * @txbd_dma: DMA handle for Tx BD ring.
122 * @rx_buff: Storage for Rx buffers states.
123 * @tx_buff: Storage for Tx buffers states.
124 * @txbd_curr: Index of Tx BD to use on the next "ndo_start_xmit".
125 * @txbd_dirty: Index of Tx BD to free on the next Tx interrupt.
126 * @last_rx_bd: Index of the last Rx BD we've got from EMAC.
127 * @link: PHY's last seen link state.
128 * @duplex: PHY's last set duplex mode.
129 * @speed: PHY's last set speed.
130 */
131 struct arc_emac_priv {
132 const char *drv_name;
133 const char *drv_version;
134 void (*set_mac_speed)(void *priv, unsigned int speed);
135
136 /* Devices */
137 struct device *dev;
138 struct mii_bus *bus;
139 struct arc_emac_mdio_bus_data bus_data;
140
141 void __iomem *regs;
142 struct clk *clk;
143
144 struct napi_struct napi;
145
146 struct arc_emac_bd *rxbd;
147 struct arc_emac_bd *txbd;
148
149 dma_addr_t rxbd_dma;
150 dma_addr_t txbd_dma;
151
152 struct buffer_state rx_buff[RX_BD_NUM];
153 struct buffer_state tx_buff[TX_BD_NUM];
154 unsigned int txbd_curr;
155 unsigned int txbd_dirty;
156
157 unsigned int last_rx_bd;
158
159 unsigned int link;
160 unsigned int duplex;
161 unsigned int speed;
162
163 unsigned int rx_missed_errors;
164 };
165
166 /**
167 * arc_reg_set - Sets EMAC register with provided value.
168 * @priv: Pointer to ARC EMAC private data structure.
169 * @reg: Register offset from base address.
170 * @value: Value to set in register.
171 */
172 static inline void arc_reg_set(struct arc_emac_priv *priv, int reg, int value)
173 {
174 iowrite32(value, priv->regs + reg * sizeof(int));
175 }
176
177 /**
178 * arc_reg_get - Gets value of specified EMAC register.
179 * @priv: Pointer to ARC EMAC private data structure.
180 * @reg: Register offset from base address.
181 *
182 * returns: Value of requested register.
183 */
184 static inline unsigned int arc_reg_get(struct arc_emac_priv *priv, int reg)
185 {
186 return ioread32(priv->regs + reg * sizeof(int));
187 }
188
189 /**
190 * arc_reg_or - Applies mask to specified EMAC register - ("reg" | "mask").
191 * @priv: Pointer to ARC EMAC private data structure.
192 * @reg: Register offset from base address.
193 * @mask: Mask to apply to specified register.
194 *
195 * This function reads initial register value, then applies provided mask
196 * to it and then writes register back.
197 */
198 static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
199 {
200 unsigned int value = arc_reg_get(priv, reg);
201
202 arc_reg_set(priv, reg, value | mask);
203 }
204
205 /**
206 * arc_reg_clr - Applies mask to specified EMAC register - ("reg" & ~"mask").
207 * @priv: Pointer to ARC EMAC private data structure.
208 * @reg: Register offset from base address.
209 * @mask: Mask to apply to specified register.
210 *
211 * This function reads initial register value, then applies provided mask
212 * to it and then writes register back.
213 */
214 static inline void arc_reg_clr(struct arc_emac_priv *priv, int reg, int mask)
215 {
216 unsigned int value = arc_reg_get(priv, reg);
217
218 arc_reg_set(priv, reg, value & ~mask);
219 }
220
221 int arc_mdio_probe(struct arc_emac_priv *priv);
222 int arc_mdio_remove(struct arc_emac_priv *priv);
223 int arc_emac_probe(struct net_device *ndev, int interface);
224 int arc_emac_remove(struct net_device *ndev);
225
226 #endif /* ARC_EMAC_H */