root/drivers/net/phy/mdio-i2c.c

DEFINITIONS

1. i2c_mii_valid_phy_id
2. i2c_mii_phy_addr
3. i2c_mii_read
4. i2c_mii_write
5. mdio_i2c_alloc

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * MDIO I2C bridge
   4  *
   5  * Copyright (C) 2015-2016 Russell King
   6  *
   7  * Network PHYs can appear on I2C buses when they are part of SFP module.
   8  * This driver exposes these PHYs to the networking PHY code, allowing
   9  * our PHY drivers access to these PHYs, and so allowing configuration
  10  * of their settings.
  11  */
  12 #include <linux/i2c.h>
  13 #include <linux/phy.h>
  14 
  15 #include "mdio-i2c.h"
  16 
  17 /*
  18  * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
  19  * specified to be present in SFP modules.  These correspond with PHY
  20  * addresses 16 and 17.  Disallow access to these "phy" addresses.
  21  */
  22 static bool i2c_mii_valid_phy_id(int phy_id)
  23 {
  24         return phy_id != 0x10 && phy_id != 0x11;
  25 }
  26 
  27 static unsigned int i2c_mii_phy_addr(int phy_id)
  28 {
  29         return phy_id + 0x40;
  30 }
  31 
  32 static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)
  33 {
  34         struct i2c_adapter *i2c = bus->priv;
  35         struct i2c_msg msgs[2];
  36         u8 data[2], dev_addr = reg;
  37         int bus_addr, ret;
  38 
  39         if (!i2c_mii_valid_phy_id(phy_id))
  40                 return 0xffff;
  41 
  42         bus_addr = i2c_mii_phy_addr(phy_id);
  43         msgs[0].addr = bus_addr;
  44         msgs[0].flags = 0;
  45         msgs[0].len = 1;
  46         msgs[0].buf = &dev_addr;
  47         msgs[1].addr = bus_addr;
  48         msgs[1].flags = I2C_M_RD;
  49         msgs[1].len = sizeof(data);
  50         msgs[1].buf = data;
  51 
  52         ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
  53         if (ret != ARRAY_SIZE(msgs))
  54                 return 0xffff;
  55 
  56         return data[0] << 8 | data[1];
  57 }
  58 
  59 static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
  60 {
  61         struct i2c_adapter *i2c = bus->priv;
  62         struct i2c_msg msg;
  63         int ret;
  64         u8 data[3];
  65 
  66         if (!i2c_mii_valid_phy_id(phy_id))
  67                 return 0;
  68 
  69         data[0] = reg;
  70         data[1] = val >> 8;
  71         data[2] = val;
  72 
  73         msg.addr = i2c_mii_phy_addr(phy_id);
  74         msg.flags = 0;
  75         msg.len = 3;
  76         msg.buf = data;
  77 
  78         ret = i2c_transfer(i2c, &msg, 1);
  79 
  80         return ret < 0 ? ret : 0;
  81 }
  82 
  83 struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c)
  84 {
  85         struct mii_bus *mii;
  86 
  87         if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
  88                 return ERR_PTR(-EINVAL);
  89 
  90         mii = mdiobus_alloc();
  91         if (!mii)
  92                 return ERR_PTR(-ENOMEM);
  93 
  94         snprintf(mii->id, MII_BUS_ID_SIZE, "i2c:%s", dev_name(parent));
  95         mii->parent = parent;
  96         mii->read = i2c_mii_read;
  97         mii->write = i2c_mii_write;
  98         mii->priv = i2c;
  99 
 100         return mii;
 101 }
 102 EXPORT_SYMBOL_GPL(mdio_i2c_alloc);
 103 
 104 MODULE_AUTHOR("Russell King");
 105 MODULE_DESCRIPTION("MDIO I2C bridge library");
 106 MODULE_LICENSE("GPL v2");