root/drivers/net/phy/bcm63xx.c

DEFINITIONS

1. bcm63xx_config_intr
2. bcm63xx_config_init

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  *      Driver for Broadcom 63xx SOCs integrated PHYs
   4  */
   5 #include "bcm-phy-lib.h"
   6 #include <linux/module.h>
   7 #include <linux/phy.h>
   8 
   9 #define MII_BCM63XX_IR          0x1a    /* interrupt register */
  10 #define MII_BCM63XX_IR_EN       0x4000  /* global interrupt enable */
  11 #define MII_BCM63XX_IR_DUPLEX   0x0800  /* duplex changed */
  12 #define MII_BCM63XX_IR_SPEED    0x0400  /* speed changed */
  13 #define MII_BCM63XX_IR_LINK     0x0200  /* link changed */
  14 #define MII_BCM63XX_IR_GMASK    0x0100  /* global interrupt mask */
  15 
  16 MODULE_DESCRIPTION("Broadcom 63xx internal PHY driver");
  17 MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
  18 MODULE_LICENSE("GPL");
  19 
  20 static int bcm63xx_config_intr(struct phy_device *phydev)
  21 {
  22         int reg, err;
  23 
  24         reg = phy_read(phydev, MII_BCM63XX_IR);
  25         if (reg < 0)
  26                 return reg;
  27 
  28         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
  29                 reg &= ~MII_BCM63XX_IR_GMASK;
  30         else
  31                 reg |= MII_BCM63XX_IR_GMASK;
  32 
  33         err = phy_write(phydev, MII_BCM63XX_IR, reg);
  34         return err;
  35 }
  36 
  37 static int bcm63xx_config_init(struct phy_device *phydev)
  38 {
  39         int reg, err;
  40 
  41         /* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
  42         linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);
  43 
  44         reg = phy_read(phydev, MII_BCM63XX_IR);
  45         if (reg < 0)
  46                 return reg;
  47 
  48         /* Mask interrupts globally.  */
  49         reg |= MII_BCM63XX_IR_GMASK;
  50         err = phy_write(phydev, MII_BCM63XX_IR, reg);
  51         if (err < 0)
  52                 return err;
  53 
  54         /* Unmask events we are interested in  */
  55         reg = ~(MII_BCM63XX_IR_DUPLEX |
  56                 MII_BCM63XX_IR_SPEED |
  57                 MII_BCM63XX_IR_LINK) |
  58                 MII_BCM63XX_IR_EN;
  59         return phy_write(phydev, MII_BCM63XX_IR, reg);
  60 }
  61 
  62 static struct phy_driver bcm63xx_driver[] = {
  63 {
  64         .phy_id         = 0x00406000,
  65         .phy_id_mask    = 0xfffffc00,
  66         .name           = "Broadcom BCM63XX (1)",
  67         /* PHY_BASIC_FEATURES */
  68         .flags          = PHY_IS_INTERNAL,
  69         .config_init    = bcm63xx_config_init,
  70         .ack_interrupt  = bcm_phy_ack_intr,
  71         .config_intr    = bcm63xx_config_intr,
  72 }, {
  73         /* same phy as above, with just a different OUI */
  74         .phy_id         = 0x002bdc00,
  75         .phy_id_mask    = 0xfffffc00,
  76         .name           = "Broadcom BCM63XX (2)",
  77         /* PHY_BASIC_FEATURES */
  78         .flags          = PHY_IS_INTERNAL,
  79         .config_init    = bcm63xx_config_init,
  80         .ack_interrupt  = bcm_phy_ack_intr,
  81         .config_intr    = bcm63xx_config_intr,
  82 } };
  83 
  84 module_phy_driver(bcm63xx_driver);
  85 
  86 static struct mdio_device_id __maybe_unused bcm63xx_tbl[] = {
  87         { 0x00406000, 0xfffffc00 },
  88         { 0x002bdc00, 0xfffffc00 },
  89         { }
  90 };
  91 
  92 MODULE_DEVICE_TABLE(mdio, bcm63xx_tbl);