root/drivers/net/wireless/ath/wil6210/pcie_bus.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. wil_set_capabilities
  2. wil_disable_irq
  3. wil_enable_irq
  4. wil_remove_all_additional_vifs
  5. wil_if_pcie_enable
  6. wil_if_pcie_disable
  7. wil_platform_rop_ramdump
  8. wil_platform_rop_fw_recovery
  9. wil_platform_ops_uninit
  10. wil_pcie_probe
  11. wil_pcie_remove
  12. wil6210_suspend
  13. wil6210_resume
  14. wil6210_pm_notify
  15. wil6210_pm_suspend
  16. wil6210_pm_resume
  17. wil6210_pm_runtime_idle
  18. wil6210_pm_runtime_resume
  19. wil6210_pm_runtime_suspend
  20. wil6210_driver_init
  21. wil6210_driver_exit

   1 /*
   2  * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
   3  * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  */
  17 
  18 #include <linux/module.h>
  19 #include <linux/pci.h>
  20 #include <linux/moduleparam.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/suspend.h>
  23 #include "wil6210.h"
  24 #include <linux/rtnetlink.h>
  25 #include <linux/pm_runtime.h>
  26 
  27 static int n_msi = 3;
  28 module_param(n_msi, int, 0444);
  29 MODULE_PARM_DESC(n_msi, " Use MSI interrupt: 0 - use INTx, 1 - single, or 3 - (default) ");
  30 
  31 bool ftm_mode;
  32 module_param(ftm_mode, bool, 0444);
  33 MODULE_PARM_DESC(ftm_mode, " Set factory test mode, default - false");
  34 
  35 static int wil6210_pm_notify(struct notifier_block *notify_block,
  36                              unsigned long mode, void *unused);
  37 
  38 static
  39 int wil_set_capabilities(struct wil6210_priv *wil)
  40 {
  41         const char *wil_fw_name;
  42         u32 jtag_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
  43         u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) &
  44                             RGF_USER_REVISION_ID_MASK);
  45         int platform_capa;
  46         struct fw_map *iccm_section, *sct;
  47 
  48         bitmap_zero(wil->hw_capa, hw_capa_last);
  49         bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
  50         bitmap_zero(wil->platform_capa, WIL_PLATFORM_CAPA_MAX);
  51         wil->wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_DEFAULT :
  52                            WIL_FW_NAME_DEFAULT;
  53         wil->chip_revision = chip_revision;
  54 
  55         switch (jtag_id) {
  56         case JTAG_DEV_ID_SPARROW:
  57                 memcpy(fw_mapping, sparrow_fw_mapping,
  58                        sizeof(sparrow_fw_mapping));
  59                 switch (chip_revision) {
  60                 case REVISION_ID_SPARROW_D0:
  61                         wil->hw_name = "Sparrow D0";
  62                         wil->hw_version = HW_VER_SPARROW_D0;
  63                         wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_SPARROW_PLUS :
  64                                       WIL_FW_NAME_SPARROW_PLUS;
  65 
  66                         if (wil_fw_verify_file_exists(wil, wil_fw_name))
  67                                 wil->wil_fw_name = wil_fw_name;
  68                         sct = wil_find_fw_mapping("mac_rgf_ext");
  69                         if (!sct) {
  70                                 wil_err(wil, "mac_rgf_ext section not found in fw_mapping\n");
  71                                 return -EINVAL;
  72                         }
  73                         memcpy(sct, &sparrow_d0_mac_rgf_ext, sizeof(*sct));
  74                         break;
  75                 case REVISION_ID_SPARROW_B0:
  76                         wil->hw_name = "Sparrow B0";
  77                         wil->hw_version = HW_VER_SPARROW_B0;
  78                         break;
  79                 default:
  80                         wil->hw_name = "Unknown";
  81                         wil->hw_version = HW_VER_UNKNOWN;
  82                         break;
  83                 }
  84                 wil->rgf_fw_assert_code_addr = SPARROW_RGF_FW_ASSERT_CODE;
  85                 wil->rgf_ucode_assert_code_addr = SPARROW_RGF_UCODE_ASSERT_CODE;
  86                 break;
  87         case JTAG_DEV_ID_TALYN:
  88                 wil->hw_name = "Talyn-MA";
  89                 wil->hw_version = HW_VER_TALYN;
  90                 memcpy(fw_mapping, talyn_fw_mapping, sizeof(talyn_fw_mapping));
  91                 wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
  92                 wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE;
  93                 if (wil_r(wil, RGF_USER_OTP_HW_RD_MACHINE_1) &
  94                     BIT_NO_FLASH_INDICATION)
  95                         set_bit(hw_capa_no_flash, wil->hw_capa);
  96                 wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_TALYN :
  97                               WIL_FW_NAME_TALYN;
  98                 if (wil_fw_verify_file_exists(wil, wil_fw_name))
  99                         wil->wil_fw_name = wil_fw_name;
 100                 break;
 101         case JTAG_DEV_ID_TALYN_MB:
 102                 wil->hw_name = "Talyn-MB";
 103                 wil->hw_version = HW_VER_TALYN_MB;
 104                 memcpy(fw_mapping, talyn_mb_fw_mapping,
 105                        sizeof(talyn_mb_fw_mapping));
 106                 wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
 107                 wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE;
 108                 set_bit(hw_capa_no_flash, wil->hw_capa);
 109                 wil->use_enhanced_dma_hw = true;
 110                 wil->use_rx_hw_reordering = true;
 111                 wil->use_compressed_rx_status = true;
 112                 wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_TALYN :
 113                               WIL_FW_NAME_TALYN;
 114                 if (wil_fw_verify_file_exists(wil, wil_fw_name))
 115                         wil->wil_fw_name = wil_fw_name;
 116                 break;
 117         default:
 118                 wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n",
 119                         jtag_id, chip_revision);
 120                 wil->hw_name = "Unknown";
 121                 wil->hw_version = HW_VER_UNKNOWN;
 122                 return -EINVAL;
 123         }
 124 
 125         wil_init_txrx_ops(wil);
 126 
 127         iccm_section = wil_find_fw_mapping("fw_code");
 128         if (!iccm_section) {
 129                 wil_err(wil, "fw_code section not found in fw_mapping\n");
 130                 return -EINVAL;
 131         }
 132         wil->iccm_base = iccm_section->host;
 133 
 134         wil_info(wil, "Board hardware is %s, flash %sexist\n", wil->hw_name,
 135                  test_bit(hw_capa_no_flash, wil->hw_capa) ? "doesn't " : "");
 136 
 137         /* Get platform capabilities */
 138         if (wil->platform_ops.get_capa) {
 139                 platform_capa =
 140                         wil->platform_ops.get_capa(wil->platform_handle);
 141                 memcpy(wil->platform_capa, &platform_capa,
 142                        min(sizeof(wil->platform_capa), sizeof(platform_capa)));
 143         }
 144 
 145         wil_info(wil, "platform_capa 0x%lx\n", *wil->platform_capa);
 146 
 147         /* extract FW capabilities from file without loading the FW */
 148         wil_request_firmware(wil, wil->wil_fw_name, false);
 149         wil_refresh_fw_capabilities(wil);
 150 
 151         return 0;
 152 }
 153 
 154 void wil_disable_irq(struct wil6210_priv *wil)
 155 {
 156         int irq = wil->pdev->irq;
 157 
 158         disable_irq(irq);
 159         if (wil->n_msi == 3) {
 160                 disable_irq(irq + 1);
 161                 disable_irq(irq + 2);
 162         }
 163 }
 164 
 165 void wil_enable_irq(struct wil6210_priv *wil)
 166 {
 167         int irq = wil->pdev->irq;
 168 
 169         enable_irq(irq);
 170         if (wil->n_msi == 3) {
 171                 enable_irq(irq + 1);
 172                 enable_irq(irq + 2);
 173         }
 174 }
 175 
 176 static void wil_remove_all_additional_vifs(struct wil6210_priv *wil)
 177 {
 178         struct wil6210_vif *vif;
 179         int i;
 180 
 181         for (i = 1; i < GET_MAX_VIFS(wil); i++) {
 182                 vif = wil->vifs[i];
 183                 if (vif) {
 184                         wil_vif_prepare_stop(vif);
 185                         wil_vif_remove(wil, vif->mid);
 186                 }
 187         }
 188 }
 189 
 190 /* Bus ops */
 191 static int wil_if_pcie_enable(struct wil6210_priv *wil)
 192 {
 193         struct pci_dev *pdev = wil->pdev;
 194         int rc;
 195         /* on platforms with buggy ACPI, pdev->msi_enabled may be set to
 196          * allow pci_enable_device to work. This indicates INTx was not routed
 197          * and only MSI should be used
 198          */
 199         int msi_only = pdev->msi_enabled;
 200 
 201         wil_dbg_misc(wil, "if_pcie_enable\n");
 202 
 203         pci_set_master(pdev);
 204 
 205         /* how many MSI interrupts to request? */
 206         switch (n_msi) {
 207         case 3:
 208         case 1:
 209                 wil_dbg_misc(wil, "Setup %d MSI interrupts\n", n_msi);
 210                 break;
 211         case 0:
 212                 wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n");
 213                 break;
 214         default:
 215                 wil_err(wil, "Invalid n_msi=%d, default to 1\n", n_msi);
 216                 n_msi = 1;
 217         }
 218 
 219         if (n_msi == 3 &&
 220             pci_alloc_irq_vectors(pdev, n_msi, n_msi, PCI_IRQ_MSI) < n_msi) {
 221                 wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
 222                 n_msi = 1;
 223         }
 224 
 225         if (n_msi == 1 && pci_enable_msi(pdev)) {
 226                 wil_err(wil, "pci_enable_msi failed, use INTx\n");
 227                 n_msi = 0;
 228         }
 229 
 230         wil->n_msi = n_msi;
 231 
 232         if (wil->n_msi == 0 && msi_only) {
 233                 wil_err(wil, "Interrupt pin not routed, unable to use INTx\n");
 234                 rc = -ENODEV;
 235                 goto stop_master;
 236         }
 237 
 238         rc = wil6210_init_irq(wil, pdev->irq);
 239         if (rc)
 240                 goto release_vectors;
 241 
 242         /* need reset here to obtain MAC */
 243         mutex_lock(&wil->mutex);
 244         rc = wil_reset(wil, false);
 245         mutex_unlock(&wil->mutex);
 246         if (rc)
 247                 goto release_irq;
 248 
 249         return 0;
 250 
 251  release_irq:
 252         wil6210_fini_irq(wil, pdev->irq);
 253  release_vectors:
 254         /* safe to call if no allocation */
 255         pci_free_irq_vectors(pdev);
 256  stop_master:
 257         pci_clear_master(pdev);
 258         return rc;
 259 }
 260 
 261 static int wil_if_pcie_disable(struct wil6210_priv *wil)
 262 {
 263         struct pci_dev *pdev = wil->pdev;
 264 
 265         wil_dbg_misc(wil, "if_pcie_disable\n");
 266 
 267         pci_clear_master(pdev);
 268         /* disable and release IRQ */
 269         wil6210_fini_irq(wil, pdev->irq);
 270         /* safe to call if no MSI */
 271         pci_disable_msi(pdev);
 272         /* TODO: disable HW */
 273 
 274         return 0;
 275 }
 276 
 277 static int wil_platform_rop_ramdump(void *wil_handle, void *buf, uint32_t size)
 278 {
 279         struct wil6210_priv *wil = wil_handle;
 280 
 281         if (!wil)
 282                 return -EINVAL;
 283 
 284         return wil_fw_copy_crash_dump(wil, buf, size);
 285 }
 286 
 287 static int wil_platform_rop_fw_recovery(void *wil_handle)
 288 {
 289         struct wil6210_priv *wil = wil_handle;
 290 
 291         if (!wil)
 292                 return -EINVAL;
 293 
 294         wil_fw_error_recovery(wil);
 295 
 296         return 0;
 297 }
 298 
 299 static void wil_platform_ops_uninit(struct wil6210_priv *wil)
 300 {
 301         if (wil->platform_ops.uninit)
 302                 wil->platform_ops.uninit(wil->platform_handle);
 303         memset(&wil->platform_ops, 0, sizeof(wil->platform_ops));
 304 }
 305 
 306 static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 307 {
 308         struct wil6210_priv *wil;
 309         struct device *dev = &pdev->dev;
 310         int rc;
 311         const struct wil_platform_rops rops = {
 312                 .ramdump = wil_platform_rop_ramdump,
 313                 .fw_recovery = wil_platform_rop_fw_recovery,
 314         };
 315         u32 bar_size = pci_resource_len(pdev, 0);
 316         int dma_addr_size[] = {64, 48, 40, 32}; /* keep descending order */
 317         int i, start_idx;
 318 
 319         /* check HW */
 320         dev_info(&pdev->dev, WIL_NAME
 321                  " device found [%04x:%04x] (rev %x) bar size 0x%x\n",
 322                  (int)pdev->vendor, (int)pdev->device, (int)pdev->revision,
 323                  bar_size);
 324 
 325         if ((bar_size < WIL6210_MIN_MEM_SIZE) ||
 326             (bar_size > WIL6210_MAX_MEM_SIZE)) {
 327                 dev_err(&pdev->dev, "Unexpected BAR0 size 0x%x\n",
 328                         bar_size);
 329                 return -ENODEV;
 330         }
 331 
 332         wil = wil_if_alloc(dev);
 333         if (IS_ERR(wil)) {
 334                 rc = (int)PTR_ERR(wil);
 335                 dev_err(dev, "wil_if_alloc failed: %d\n", rc);
 336                 return rc;
 337         }
 338 
 339         wil->pdev = pdev;
 340         pci_set_drvdata(pdev, wil);
 341         wil->bar_size = bar_size;
 342         /* rollback to if_free */
 343 
 344         wil->platform_handle =
 345                 wil_platform_init(&pdev->dev, &wil->platform_ops, &rops, wil);
 346         if (!wil->platform_handle) {
 347                 rc = -ENODEV;
 348                 wil_err(wil, "wil_platform_init failed\n");
 349                 goto if_free;
 350         }
 351         /* rollback to err_plat */
 352         rc = pci_enable_device(pdev);
 353         if (rc && pdev->msi_enabled == 0) {
 354                 wil_err(wil,
 355                         "pci_enable_device failed, retry with MSI only\n");
 356                 /* Work around for platforms that can't allocate IRQ:
 357                  * retry with MSI only
 358                  */
 359                 pdev->msi_enabled = 1;
 360                 rc = pci_enable_device(pdev);
 361         }
 362         if (rc) {
 363                 wil_err(wil,
 364                         "pci_enable_device failed, even with MSI only\n");
 365                 goto err_plat;
 366         }
 367         /* rollback to err_disable_pdev */
 368         pci_set_power_state(pdev, PCI_D0);
 369 
 370         rc = pci_request_region(pdev, 0, WIL_NAME);
 371         if (rc) {
 372                 wil_err(wil, "pci_request_region failed\n");
 373                 goto err_disable_pdev;
 374         }
 375         /* rollback to err_release_reg */
 376 
 377         wil->csr = pci_ioremap_bar(pdev, 0);
 378         if (!wil->csr) {
 379                 wil_err(wil, "pci_ioremap_bar failed\n");
 380                 rc = -ENODEV;
 381                 goto err_release_reg;
 382         }
 383         /* rollback to err_iounmap */
 384         wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);
 385 
 386         rc = wil_set_capabilities(wil);
 387         if (rc) {
 388                 wil_err(wil, "wil_set_capabilities failed, rc %d\n", rc);
 389                 goto err_iounmap;
 390         }
 391 
 392         /* device supports >32bit addresses.
 393          * for legacy DMA start from 48 bit.
 394          */
 395         start_idx = wil->use_enhanced_dma_hw ? 0 : 1;
 396 
 397         for (i = start_idx; i < ARRAY_SIZE(dma_addr_size); i++) {
 398                 rc = dma_set_mask_and_coherent(dev,
 399                                                DMA_BIT_MASK(dma_addr_size[i]));
 400                 if (rc) {
 401                         dev_err(dev, "dma_set_mask_and_coherent(%d) failed: %d\n",
 402                                 dma_addr_size[i], rc);
 403                         continue;
 404                 }
 405                 dev_info(dev, "using dma mask %d", dma_addr_size[i]);
 406                 wil->dma_addr_size = dma_addr_size[i];
 407                 break;
 408         }
 409 
 410         if (wil->dma_addr_size == 0)
 411                 goto err_iounmap;
 412 
 413         wil6210_clear_irq(wil);
 414 
 415         /* FW should raise IRQ when ready */
 416         rc = wil_if_pcie_enable(wil);
 417         if (rc) {
 418                 wil_err(wil, "Enable device failed\n");
 419                 goto err_iounmap;
 420         }
 421         /* rollback to bus_disable */
 422 
 423         wil_clear_fw_log_addr(wil);
 424         rc = wil_if_add(wil);
 425         if (rc) {
 426                 wil_err(wil, "wil_if_add failed: %d\n", rc);
 427                 goto bus_disable;
 428         }
 429 
 430         /* in case of WMI-only FW, perform full reset and FW loading */
 431         if (test_bit(WMI_FW_CAPABILITY_WMI_ONLY, wil->fw_capabilities)) {
 432                 wil_dbg_misc(wil, "Loading WMI only FW\n");
 433                 mutex_lock(&wil->mutex);
 434                 rc = wil_reset(wil, true);
 435                 mutex_unlock(&wil->mutex);
 436                 if (rc) {
 437                         wil_err(wil, "failed to load WMI only FW\n");
 438                         /* ignore the error to allow debugging */
 439                 }
 440         }
 441 
 442         if (IS_ENABLED(CONFIG_PM))
 443                 wil->pm_notify.notifier_call = wil6210_pm_notify;
 444 
 445         rc = register_pm_notifier(&wil->pm_notify);
 446         if (rc)
 447                 /* Do not fail the driver initialization, as suspend can
 448                  * be prevented in a later phase if needed
 449                  */
 450                 wil_err(wil, "register_pm_notifier failed: %d\n", rc);
 451 
 452         wil6210_debugfs_init(wil);
 453 
 454         wil_pm_runtime_allow(wil);
 455 
 456         return 0;
 457 
 458 bus_disable:
 459         wil_if_pcie_disable(wil);
 460 err_iounmap:
 461         pci_iounmap(pdev, wil->csr);
 462 err_release_reg:
 463         pci_release_region(pdev, 0);
 464 err_disable_pdev:
 465         pci_disable_device(pdev);
 466 err_plat:
 467         wil_platform_ops_uninit(wil);
 468 if_free:
 469         wil_if_free(wil);
 470 
 471         return rc;
 472 }
 473 
 474 static void wil_pcie_remove(struct pci_dev *pdev)
 475 {
 476         struct wil6210_priv *wil = pci_get_drvdata(pdev);
 477         void __iomem *csr = wil->csr;
 478 
 479         wil_dbg_misc(wil, "pcie_remove\n");
 480 
 481         unregister_pm_notifier(&wil->pm_notify);
 482 
 483         wil_pm_runtime_forbid(wil);
 484 
 485         wil6210_debugfs_remove(wil);
 486         rtnl_lock();
 487         wil_p2p_wdev_free(wil);
 488         wil_remove_all_additional_vifs(wil);
 489         rtnl_unlock();
 490         wil_if_remove(wil);
 491         wil_if_pcie_disable(wil);
 492         pci_iounmap(pdev, csr);
 493         pci_release_region(pdev, 0);
 494         pci_disable_device(pdev);
 495         wil_platform_ops_uninit(wil);
 496         wil_if_free(wil);
 497 }
 498 
 499 static const struct pci_device_id wil6210_pcie_ids[] = {
 500         { PCI_DEVICE(0x1ae9, 0x0310) },
 501         { PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */
 502         { PCI_DEVICE(0x17cb, 0x1201) }, /* Talyn */
 503         { /* end: all zeroes */ },
 504 };
 505 MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
 506 
 507 static int wil6210_suspend(struct device *dev, bool is_runtime)
 508 {
 509         int rc = 0;
 510         struct pci_dev *pdev = to_pci_dev(dev);
 511         struct wil6210_priv *wil = pci_get_drvdata(pdev);
 512         bool keep_radio_on, active_ifaces;
 513 
 514         wil_dbg_pm(wil, "suspend: %s\n", is_runtime ? "runtime" : "system");
 515 
 516         mutex_lock(&wil->vif_mutex);
 517         active_ifaces = wil_has_active_ifaces(wil, true, false);
 518         mutex_unlock(&wil->vif_mutex);
 519         keep_radio_on = active_ifaces && wil->keep_radio_on_during_sleep;
 520 
 521         rc = wil_can_suspend(wil, is_runtime);
 522         if (rc)
 523                 goto out;
 524 
 525         rc = wil_suspend(wil, is_runtime, keep_radio_on);
 526         if (!rc) {
 527                 /* In case radio stays on, platform device will control
 528                  * PCIe master
 529                  */
 530                 if (!keep_radio_on) {
 531                         /* disable bus mastering */
 532                         pci_clear_master(pdev);
 533                         wil->suspend_stats.r_off.successful_suspends++;
 534                 } else {
 535                         wil->suspend_stats.r_on.successful_suspends++;
 536                 }
 537         }
 538 out:
 539         return rc;
 540 }
 541 
 542 static int wil6210_resume(struct device *dev, bool is_runtime)
 543 {
 544         int rc = 0;
 545         struct pci_dev *pdev = to_pci_dev(dev);
 546         struct wil6210_priv *wil = pci_get_drvdata(pdev);
 547         bool keep_radio_on, active_ifaces;
 548 
 549         wil_dbg_pm(wil, "resume: %s\n", is_runtime ? "runtime" : "system");
 550 
 551         mutex_lock(&wil->vif_mutex);
 552         active_ifaces = wil_has_active_ifaces(wil, true, false);
 553         mutex_unlock(&wil->vif_mutex);
 554         keep_radio_on = active_ifaces && wil->keep_radio_on_during_sleep;
 555 
 556         /* In case radio stays on, platform device will control
 557          * PCIe master
 558          */
 559         if (!keep_radio_on)
 560                 /* allow master */
 561                 pci_set_master(pdev);
 562         rc = wil_resume(wil, is_runtime, keep_radio_on);
 563         if (rc) {
 564                 wil_err(wil, "device failed to resume (%d)\n", rc);
 565                 if (!keep_radio_on) {
 566                         pci_clear_master(pdev);
 567                         wil->suspend_stats.r_off.failed_resumes++;
 568                 } else {
 569                         wil->suspend_stats.r_on.failed_resumes++;
 570                 }
 571         } else {
 572                 if (keep_radio_on)
 573                         wil->suspend_stats.r_on.successful_resumes++;
 574                 else
 575                         wil->suspend_stats.r_off.successful_resumes++;
 576         }
 577 
 578         return rc;
 579 }
 580 
 581 static int wil6210_pm_notify(struct notifier_block *notify_block,
 582                              unsigned long mode, void *unused)
 583 {
 584         struct wil6210_priv *wil = container_of(
 585                 notify_block, struct wil6210_priv, pm_notify);
 586         int rc = 0;
 587         enum wil_platform_event evt;
 588 
 589         wil_dbg_pm(wil, "pm_notify: mode (%ld)\n", mode);
 590 
 591         switch (mode) {
 592         case PM_HIBERNATION_PREPARE:
 593         case PM_SUSPEND_PREPARE:
 594         case PM_RESTORE_PREPARE:
 595                 rc = wil_can_suspend(wil, false);
 596                 if (rc)
 597                         break;
 598                 evt = WIL_PLATFORM_EVT_PRE_SUSPEND;
 599                 if (wil->platform_ops.notify)
 600                         rc = wil->platform_ops.notify(wil->platform_handle,
 601                                                       evt);
 602                 break;
 603         case PM_POST_SUSPEND:
 604         case PM_POST_HIBERNATION:
 605         case PM_POST_RESTORE:
 606                 evt = WIL_PLATFORM_EVT_POST_SUSPEND;
 607                 if (wil->platform_ops.notify)
 608                         rc = wil->platform_ops.notify(wil->platform_handle,
 609                                                       evt);
 610                 break;
 611         default:
 612                 wil_dbg_pm(wil, "unhandled notify mode %ld\n", mode);
 613                 break;
 614         }
 615 
 616         wil_dbg_pm(wil, "notification mode %ld: rc (%d)\n", mode, rc);
 617         return rc;
 618 }
 619 
 620 static int __maybe_unused wil6210_pm_suspend(struct device *dev)
 621 {
 622         return wil6210_suspend(dev, false);
 623 }
 624 
 625 static int __maybe_unused wil6210_pm_resume(struct device *dev)
 626 {
 627         return wil6210_resume(dev, false);
 628 }
 629 
 630 static int __maybe_unused wil6210_pm_runtime_idle(struct device *dev)
 631 {
 632         struct pci_dev *pdev = to_pci_dev(dev);
 633         struct wil6210_priv *wil = pci_get_drvdata(pdev);
 634 
 635         wil_dbg_pm(wil, "Runtime idle\n");
 636 
 637         return wil_can_suspend(wil, true);
 638 }
 639 
 640 static int __maybe_unused wil6210_pm_runtime_resume(struct device *dev)
 641 {
 642         return wil6210_resume(dev, true);
 643 }
 644 
 645 static int __maybe_unused wil6210_pm_runtime_suspend(struct device *dev)
 646 {
 647         struct pci_dev *pdev = to_pci_dev(dev);
 648         struct wil6210_priv *wil = pci_get_drvdata(pdev);
 649 
 650         if (test_bit(wil_status_suspended, wil->status)) {
 651                 wil_dbg_pm(wil, "trying to suspend while suspended\n");
 652                 return 1;
 653         }
 654 
 655         return wil6210_suspend(dev, true);
 656 }
 657 
 658 static const struct dev_pm_ops wil6210_pm_ops = {
 659         SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume)
 660         SET_RUNTIME_PM_OPS(wil6210_pm_runtime_suspend,
 661                            wil6210_pm_runtime_resume,
 662                            wil6210_pm_runtime_idle)
 663 };
 664 
 665 static struct pci_driver wil6210_driver = {
 666         .probe          = wil_pcie_probe,
 667         .remove         = wil_pcie_remove,
 668         .id_table       = wil6210_pcie_ids,
 669         .name           = WIL_NAME,
 670         .driver         = {
 671                 .pm = &wil6210_pm_ops,
 672         },
 673 };
 674 
 675 static int __init wil6210_driver_init(void)
 676 {
 677         int rc;
 678 
 679         rc = wil_platform_modinit();
 680         if (rc)
 681                 return rc;
 682 
 683         rc = pci_register_driver(&wil6210_driver);
 684         if (rc)
 685                 wil_platform_modexit();
 686         return rc;
 687 }
 688 module_init(wil6210_driver_init);
 689 
 690 static void __exit wil6210_driver_exit(void)
 691 {
 692         pci_unregister_driver(&wil6210_driver);
 693         wil_platform_modexit();
 694 }
 695 module_exit(wil6210_driver_exit);
 696 
 697 MODULE_LICENSE("Dual BSD/GPL");
 698 MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
 699 MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");

/* [<][>][^][v][top][bottom][index][help] */