drivers/net/wireless/marvell/mwifiex/sta

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
mwifiex_process_cmdresp_error
mwifiex_ret_802_11_rssi_info
mwifiex_ret_802_11_snmp_mib
mwifiex_ret_get_log
mwifiex_ret_tx_rate_cfg
mwifiex_get_power_level
mwifiex_ret_tx_power_cfg
mwifiex_ret_rf_tx_power
mwifiex_ret_rf_antenna
mwifiex_ret_802_11_mac_address
mwifiex_ret_mac_multicast_adr
mwifiex_ret_802_11_tx_rate_query
mwifiex_ret_802_11_deauthenticate
mwifiex_ret_802_11_ad_hoc_stop
mwifiex_ret_802_11_key_material_v1
mwifiex_ret_802_11_key_material_v2
mwifiex_ret_802_11_key_material
mwifiex_ret_802_11d_domain_info
mwifiex_ret_ver_ext
mwifiex_ret_remain_on_chan
mwifiex_ret_p2p_mode_cfg
mwifiex_ret_mem_access
mwifiex_ret_reg_access
mwifiex_ret_ibss_coalescing_status
mwifiex_ret_tdls_oper
mwifiex_ret_subsc_evt
mwifiex_ret_uap_sta_list
mwifiex_ret_cfg_data
mwifiex_ret_sdio_rx_aggr_cfg
mwifiex_ret_robust_coex
mwifiex_create_custom_regdomain
mwifiex_ret_chan_region_cfg
mwifiex_ret_pkt_aggr_ctrl
mwifiex_ret_get_chan_info
mwifiex_process_sta_cmdresp
   1 /*
   2  * Marvell Wireless LAN device driver: station command response handling
   3  *
   4  * Copyright (C) 2011-2014, Marvell International Ltd.
   5  *
   6  * This software file (the "File") is distributed by Marvell International
   7  * Ltd. under the terms of the GNU General Public License Version 2, June 1991
   8  * (the "License").  You may use, redistribute and/or modify this File in
   9  * accordance with the terms and conditions of the License, a copy of which
  10  * is available by writing to the Free Software Foundation, Inc.,
  11  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
  12  * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
  13  *
  14  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
  15  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
  16  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
  17  * this warranty disclaimer.
  18  */
  19 
  20 #include "decl.h"
  21 #include "ioctl.h"
  22 #include "util.h"
  23 #include "fw.h"
  24 #include "main.h"
  25 #include "wmm.h"
  26 #include "11n.h"
  27 #include "11ac.h"
  28 
  29 
  30 /*
  31  * This function handles the command response error case.
  32  *
  33  * For scan response error, the function cancels all the pending
  34  * scan commands and generates an event to inform the applications
  35  * of the scan completion.
  36  *
  37  * For Power Save command failure, we do not retry enter PS
  38  * command in case of Ad-hoc mode.
  39  *
  40  * For all other response errors, the current command buffer is freed
  41  * and returned to the free command queue.
  42  */
  43 static void
  44 mwifiex_process_cmdresp_error(struct mwifiex_private *priv,
  45                               struct host_cmd_ds_command *resp)
  46 {
  47         struct mwifiex_adapter *adapter = priv->adapter;
  48         struct host_cmd_ds_802_11_ps_mode_enh *pm;
  49 
  50         mwifiex_dbg(adapter, ERROR,
  51                     "CMD_RESP: cmd %#x error, result=%#x\n",
  52                     resp->command, resp->result);
  53 
  54         if (adapter->curr_cmd->wait_q_enabled)
  55                 adapter->cmd_wait_q.status = -1;
  56 
  57         switch (le16_to_cpu(resp->command)) {
  58         case HostCmd_CMD_802_11_PS_MODE_ENH:
  59                 pm = &resp->params.psmode_enh;
  60                 mwifiex_dbg(adapter, ERROR,
  61                             "PS_MODE_ENH cmd failed: result=0x%x action=0x%X\n",
  62                             resp->result, le16_to_cpu(pm->action));
  63                 /* We do not re-try enter-ps command in ad-hoc mode. */
  64                 if (le16_to_cpu(pm->action) == EN_AUTO_PS &&
  65                     (le16_to_cpu(pm->params.ps_bitmap) & BITMAP_STA_PS) &&
  66                     priv->bss_mode == NL80211_IFTYPE_ADHOC)
  67                         adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
  68 
  69                 break;
  70         case HostCmd_CMD_802_11_SCAN:
  71         case HostCmd_CMD_802_11_SCAN_EXT:
  72                 mwifiex_cancel_scan(adapter);
  73                 break;
  74 
  75         case HostCmd_CMD_MAC_CONTROL:
  76                 break;
  77 
  78         case HostCmd_CMD_SDIO_SP_RX_AGGR_CFG:
  79                 mwifiex_dbg(adapter, MSG,
  80                             "SDIO RX single-port aggregation Not support\n");
  81                 break;
  82 
  83         default:
  84                 break;
  85         }
  86         /* Handling errors here */
  87         mwifiex_recycle_cmd_node(adapter, adapter->curr_cmd);
  88 
  89         spin_lock_bh(&adapter->mwifiex_cmd_lock);
  90         adapter->curr_cmd = NULL;
  91         spin_unlock_bh(&adapter->mwifiex_cmd_lock);
  92 }
  93 
  94 /*
  95  * This function handles the command response of get RSSI info.
  96  *
  97  * Handling includes changing the header fields into CPU format
  98  * and saving the following parameters in driver -
  99  *      - Last data and beacon RSSI value
 100  *      - Average data and beacon RSSI value
 101  *      - Last data and beacon NF value
 102  *      - Average data and beacon NF value
 103  *
 104  * The parameters are send to the application as well, along with
 105  * calculated SNR values.
 106  */
 107 static int mwifiex_ret_802_11_rssi_info(struct mwifiex_private *priv,
 108                                         struct host_cmd_ds_command *resp)
 109 {
 110         struct host_cmd_ds_802_11_rssi_info_rsp *rssi_info_rsp =
 111                                                 &resp->params.rssi_info_rsp;
 112         struct mwifiex_ds_misc_subsc_evt *subsc_evt =
 113                                                 &priv->async_subsc_evt_storage;
 114 
 115         priv->data_rssi_last = le16_to_cpu(rssi_info_rsp->data_rssi_last);
 116         priv->data_nf_last = le16_to_cpu(rssi_info_rsp->data_nf_last);
 117 
 118         priv->data_rssi_avg = le16_to_cpu(rssi_info_rsp->data_rssi_avg);
 119         priv->data_nf_avg = le16_to_cpu(rssi_info_rsp->data_nf_avg);
 120 
 121         priv->bcn_rssi_last = le16_to_cpu(rssi_info_rsp->bcn_rssi_last);
 122         priv->bcn_nf_last = le16_to_cpu(rssi_info_rsp->bcn_nf_last);
 123 
 124         priv->bcn_rssi_avg = le16_to_cpu(rssi_info_rsp->bcn_rssi_avg);
 125         priv->bcn_nf_avg = le16_to_cpu(rssi_info_rsp->bcn_nf_avg);
 126 
 127         if (priv->subsc_evt_rssi_state == EVENT_HANDLED)
 128                 return 0;
 129 
 130         memset(subsc_evt, 0x00, sizeof(struct mwifiex_ds_misc_subsc_evt));
 131 
 132         /* Resubscribe low and high rssi events with new thresholds */
 133         subsc_evt->events = BITMASK_BCN_RSSI_LOW | BITMASK_BCN_RSSI_HIGH;
 134         subsc_evt->action = HostCmd_ACT_BITWISE_SET;
 135         if (priv->subsc_evt_rssi_state == RSSI_LOW_RECVD) {
 136                 subsc_evt->bcn_l_rssi_cfg.abs_value = abs(priv->bcn_rssi_avg -
 137                                 priv->cqm_rssi_hyst);
 138                 subsc_evt->bcn_h_rssi_cfg.abs_value = abs(priv->cqm_rssi_thold);
 139         } else if (priv->subsc_evt_rssi_state == RSSI_HIGH_RECVD) {
 140                 subsc_evt->bcn_l_rssi_cfg.abs_value = abs(priv->cqm_rssi_thold);
 141                 subsc_evt->bcn_h_rssi_cfg.abs_value = abs(priv->bcn_rssi_avg +
 142                                 priv->cqm_rssi_hyst);
 143         }
 144         subsc_evt->bcn_l_rssi_cfg.evt_freq = 1;
 145         subsc_evt->bcn_h_rssi_cfg.evt_freq = 1;
 146 
 147         priv->subsc_evt_rssi_state = EVENT_HANDLED;
 148 
 149         mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SUBSCRIBE_EVENT,
 150                          0, 0, subsc_evt, false);
 151 
 152         return 0;
 153 }
 154 
 155 /*
 156  * This function handles the command response of set/get SNMP
 157  * MIB parameters.
 158  *
 159  * Handling includes changing the header fields into CPU format
 160  * and saving the parameter in driver.
 161  *
 162  * The following parameters are supported -
 163  *      - Fragmentation threshold
 164  *      - RTS threshold
 165  *      - Short retry limit
 166  */
 167 static int mwifiex_ret_802_11_snmp_mib(struct mwifiex_private *priv,
 168                                        struct host_cmd_ds_command *resp,
 169                                        u32 *data_buf)
 170 {
 171         struct host_cmd_ds_802_11_snmp_mib *smib = &resp->params.smib;
 172         u16 oid = le16_to_cpu(smib->oid);
 173         u16 query_type = le16_to_cpu(smib->query_type);
 174         u32 ul_temp;
 175 
 176         mwifiex_dbg(priv->adapter, INFO,
 177                     "info: SNMP_RESP: oid value = %#x,\t"
 178                     "query_type = %#x, buf size = %#x\n",
 179                     oid, query_type, le16_to_cpu(smib->buf_size));
 180         if (query_type == HostCmd_ACT_GEN_GET) {
 181                 ul_temp = get_unaligned_le16(smib->value);
 182                 if (data_buf)
 183                         *data_buf = ul_temp;
 184                 switch (oid) {
 185                 case FRAG_THRESH_I:
 186                         mwifiex_dbg(priv->adapter, INFO,
 187                                     "info: SNMP_RESP: FragThsd =%u\n",
 188                                     ul_temp);
 189                         break;
 190                 case RTS_THRESH_I:
 191                         mwifiex_dbg(priv->adapter, INFO,
 192                                     "info: SNMP_RESP: RTSThsd =%u\n",
 193                                     ul_temp);
 194                         break;
 195                 case SHORT_RETRY_LIM_I:
 196                         mwifiex_dbg(priv->adapter, INFO,
 197                                     "info: SNMP_RESP: TxRetryCount=%u\n",
 198                                     ul_temp);
 199                         break;
 200                 case DTIM_PERIOD_I:
 201                         mwifiex_dbg(priv->adapter, INFO,
 202                                     "info: SNMP_RESP: DTIM period=%u\n",
 203                                     ul_temp);
 204                 default:
 205                         break;
 206                 }
 207         }
 208 
 209         return 0;
 210 }
 211 
 212 /*
 213  * This function handles the command response of get log request
 214  *
 215  * Handling includes changing the header fields into CPU format
 216  * and sending the received parameters to application.
 217  */
 218 static int mwifiex_ret_get_log(struct mwifiex_private *priv,
 219                                struct host_cmd_ds_command *resp,
 220                                struct mwifiex_ds_get_stats *stats)
 221 {
 222         struct host_cmd_ds_802_11_get_log *get_log =
 223                 &resp->params.get_log;
 224 
 225         if (stats) {
 226                 stats->mcast_tx_frame = le32_to_cpu(get_log->mcast_tx_frame);
 227                 stats->failed = le32_to_cpu(get_log->failed);
 228                 stats->retry = le32_to_cpu(get_log->retry);
 229                 stats->multi_retry = le32_to_cpu(get_log->multi_retry);
 230                 stats->frame_dup = le32_to_cpu(get_log->frame_dup);
 231                 stats->rts_success = le32_to_cpu(get_log->rts_success);
 232                 stats->rts_failure = le32_to_cpu(get_log->rts_failure);
 233                 stats->ack_failure = le32_to_cpu(get_log->ack_failure);
 234                 stats->rx_frag = le32_to_cpu(get_log->rx_frag);
 235                 stats->mcast_rx_frame = le32_to_cpu(get_log->mcast_rx_frame);
 236                 stats->fcs_error = le32_to_cpu(get_log->fcs_error);
 237                 stats->tx_frame = le32_to_cpu(get_log->tx_frame);
 238                 stats->wep_icv_error[0] =
 239                         le32_to_cpu(get_log->wep_icv_err_cnt[0]);
 240                 stats->wep_icv_error[1] =
 241                         le32_to_cpu(get_log->wep_icv_err_cnt[1]);
 242                 stats->wep_icv_error[2] =
 243                         le32_to_cpu(get_log->wep_icv_err_cnt[2]);
 244                 stats->wep_icv_error[3] =
 245                         le32_to_cpu(get_log->wep_icv_err_cnt[3]);
 246                 stats->bcn_rcv_cnt = le32_to_cpu(get_log->bcn_rcv_cnt);
 247                 stats->bcn_miss_cnt = le32_to_cpu(get_log->bcn_miss_cnt);
 248         }
 249 
 250         return 0;
 251 }
 252 
 253 /*
 254  * This function handles the command response of set/get Tx rate
 255  * configurations.
 256  *
 257  * Handling includes changing the header fields into CPU format
 258  * and saving the following parameters in driver -
 259  *      - DSSS rate bitmap
 260  *      - OFDM rate bitmap
 261  *      - HT MCS rate bitmaps
 262  *
 263  * Based on the new rate bitmaps, the function re-evaluates if
 264  * auto data rate has been activated. If not, it sends another
 265  * query to the firmware to get the current Tx data rate.
 266  */
 267 static int mwifiex_ret_tx_rate_cfg(struct mwifiex_private *priv,
 268                                    struct host_cmd_ds_command *resp)
 269 {
 270         struct host_cmd_ds_tx_rate_cfg *rate_cfg = &resp->params.tx_rate_cfg;
 271         struct mwifiex_rate_scope *rate_scope;
 272         struct mwifiex_ie_types_header *head;
 273         u16 tlv, tlv_buf_len, tlv_buf_left;
 274         u8 *tlv_buf;
 275         u32 i;
 276 
 277         tlv_buf = ((u8 *)rate_cfg) + sizeof(struct host_cmd_ds_tx_rate_cfg);
 278         tlv_buf_left = le16_to_cpu(resp->size) - S_DS_GEN - sizeof(*rate_cfg);
 279 
 280         while (tlv_buf_left >= sizeof(*head)) {
 281                 head = (struct mwifiex_ie_types_header *)tlv_buf;
 282                 tlv = le16_to_cpu(head->type);
 283                 tlv_buf_len = le16_to_cpu(head->len);
 284 
 285                 if (tlv_buf_left < (sizeof(*head) + tlv_buf_len))
 286                         break;
 287 
 288                 switch (tlv) {
 289                 case TLV_TYPE_RATE_SCOPE:
 290                         rate_scope = (struct mwifiex_rate_scope *) tlv_buf;
 291                         priv->bitmap_rates[0] =
 292                                 le16_to_cpu(rate_scope->hr_dsss_rate_bitmap);
 293                         priv->bitmap_rates[1] =
 294                                 le16_to_cpu(rate_scope->ofdm_rate_bitmap);
 295                         for (i = 0;
 296                              i < ARRAY_SIZE(rate_scope->ht_mcs_rate_bitmap);
 297                              i++)
 298                                 priv->bitmap_rates[2 + i] =
 299                                         le16_to_cpu(rate_scope->
 300                                                     ht_mcs_rate_bitmap[i]);
 301 
 302                         if (priv->adapter->fw_api_ver == MWIFIEX_FW_V15) {
 303                                 for (i = 0; i < ARRAY_SIZE(rate_scope->
 304                                                            vht_mcs_rate_bitmap);
 305                                      i++)
 306                                         priv->bitmap_rates[10 + i] =
 307                                             le16_to_cpu(rate_scope->
 308                                                         vht_mcs_rate_bitmap[i]);
 309                         }
 310                         break;
 311                         /* Add RATE_DROP tlv here */
 312                 }
 313 
 314                 tlv_buf += (sizeof(*head) + tlv_buf_len);
 315                 tlv_buf_left -= (sizeof(*head) + tlv_buf_len);
 316         }
 317 
 318         priv->is_data_rate_auto = mwifiex_is_rate_auto(priv);
 319 
 320         if (priv->is_data_rate_auto)
 321                 priv->data_rate = 0;
 322         else
 323                 return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
 324                                         HostCmd_ACT_GEN_GET, 0, NULL, false);
 325 
 326         return 0;
 327 }
 328 
 329 /*
 330  * This function handles the command response of get Tx power level.
 331  *
 332  * Handling includes saving the maximum and minimum Tx power levels
 333  * in driver, as well as sending the values to user.
 334  */
 335 static int mwifiex_get_power_level(struct mwifiex_private *priv, void *data_buf)
 336 {
 337         int length, max_power = -1, min_power = -1;
 338         struct mwifiex_types_power_group *pg_tlv_hdr;
 339         struct mwifiex_power_group *pg;
 340 
 341         if (!data_buf)
 342                 return -1;
 343 
 344         pg_tlv_hdr = (struct mwifiex_types_power_group *)((u8 *)data_buf);
 345         pg = (struct mwifiex_power_group *)
 346                 ((u8 *) pg_tlv_hdr + sizeof(struct mwifiex_types_power_group));
 347         length = le16_to_cpu(pg_tlv_hdr->length);
 348 
 349         /* At least one structure required to update power */
 350         if (length < sizeof(struct mwifiex_power_group))
 351                 return 0;
 352 
 353         max_power = pg->power_max;
 354         min_power = pg->power_min;
 355         length -= sizeof(struct mwifiex_power_group);
 356 
 357         while (length >= sizeof(struct mwifiex_power_group)) {
 358                 pg++;
 359                 if (max_power < pg->power_max)
 360                         max_power = pg->power_max;
 361 
 362                 if (min_power > pg->power_min)
 363                         min_power = pg->power_min;
 364 
 365                 length -= sizeof(struct mwifiex_power_group);
 366         }
 367         priv->min_tx_power_level = (u8) min_power;
 368         priv->max_tx_power_level = (u8) max_power;
 369 
 370         return 0;
 371 }
 372 
 373 /*
 374  * This function handles the command response of set/get Tx power
 375  * configurations.
 376  *
 377  * Handling includes changing the header fields into CPU format
 378  * and saving the current Tx power level in driver.
 379  */
 380 static int mwifiex_ret_tx_power_cfg(struct mwifiex_private *priv,
 381                                     struct host_cmd_ds_command *resp)
 382 {
 383         struct mwifiex_adapter *adapter = priv->adapter;
 384         struct host_cmd_ds_txpwr_cfg *txp_cfg = &resp->params.txp_cfg;
 385         struct mwifiex_types_power_group *pg_tlv_hdr;
 386         struct mwifiex_power_group *pg;
 387         u16 action = le16_to_cpu(txp_cfg->action);
 388         u16 tlv_buf_left;
 389 
 390         pg_tlv_hdr = (struct mwifiex_types_power_group *)
 391                 ((u8 *)txp_cfg +
 392                  sizeof(struct host_cmd_ds_txpwr_cfg));
 393 
 394         pg = (struct mwifiex_power_group *)
 395                 ((u8 *)pg_tlv_hdr +
 396                  sizeof(struct mwifiex_types_power_group));
 397 
 398         tlv_buf_left = le16_to_cpu(resp->size) - S_DS_GEN - sizeof(*txp_cfg);
 399         if (tlv_buf_left <
 400                         le16_to_cpu(pg_tlv_hdr->length) + sizeof(*pg_tlv_hdr))
 401                 return 0;
 402 
 403         switch (action) {
 404         case HostCmd_ACT_GEN_GET:
 405                 if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING)
 406                         mwifiex_get_power_level(priv, pg_tlv_hdr);
 407 
 408                 priv->tx_power_level = (u16) pg->power_min;
 409                 break;
 410 
 411         case HostCmd_ACT_GEN_SET:
 412                 if (!le32_to_cpu(txp_cfg->mode))
 413                         break;
 414 
 415                 if (pg->power_max == pg->power_min)
 416                         priv->tx_power_level = (u16) pg->power_min;
 417                 break;
 418         default:
 419                 mwifiex_dbg(adapter, ERROR,
 420                             "CMD_RESP: unknown cmd action %d\n",
 421                             action);
 422                 return 0;
 423         }
 424         mwifiex_dbg(adapter, INFO,
 425                     "info: Current TxPower Level = %d, Max Power=%d, Min Power=%d\n",
 426                     priv->tx_power_level, priv->max_tx_power_level,
 427                     priv->min_tx_power_level);
 428 
 429         return 0;
 430 }
 431 
 432 /*
 433  * This function handles the command response of get RF Tx power.
 434  */
 435 static int mwifiex_ret_rf_tx_power(struct mwifiex_private *priv,
 436                                    struct host_cmd_ds_command *resp)
 437 {
 438         struct host_cmd_ds_rf_tx_pwr *txp = &resp->params.txp;
 439         u16 action = le16_to_cpu(txp->action);
 440 
 441         priv->tx_power_level = le16_to_cpu(txp->cur_level);
 442 
 443         if (action == HostCmd_ACT_GEN_GET) {
 444                 priv->max_tx_power_level = txp->max_power;
 445                 priv->min_tx_power_level = txp->min_power;
 446         }
 447 
 448         mwifiex_dbg(priv->adapter, INFO,
 449                     "Current TxPower Level=%d, Max Power=%d, Min Power=%d\n",
 450                     priv->tx_power_level, priv->max_tx_power_level,
 451                     priv->min_tx_power_level);
 452 
 453         return 0;
 454 }
 455 
 456 /*
 457  * This function handles the command response of set rf antenna
 458  */
 459 static int mwifiex_ret_rf_antenna(struct mwifiex_private *priv,
 460                                   struct host_cmd_ds_command *resp)
 461 {
 462         struct host_cmd_ds_rf_ant_mimo *ant_mimo = &resp->params.ant_mimo;
 463         struct host_cmd_ds_rf_ant_siso *ant_siso = &resp->params.ant_siso;
 464         struct mwifiex_adapter *adapter = priv->adapter;
 465 
 466         if (adapter->hw_dev_mcs_support == HT_STREAM_2X2) {
 467                 priv->tx_ant = le16_to_cpu(ant_mimo->tx_ant_mode);
 468                 priv->rx_ant = le16_to_cpu(ant_mimo->rx_ant_mode);
 469                 mwifiex_dbg(adapter, INFO,
 470                             "RF_ANT_RESP: Tx action = 0x%x, Tx Mode = 0x%04x\t"
 471                             "Rx action = 0x%x, Rx Mode = 0x%04x\n",
 472                             le16_to_cpu(ant_mimo->action_tx),
 473                             le16_to_cpu(ant_mimo->tx_ant_mode),
 474                             le16_to_cpu(ant_mimo->action_rx),
 475                             le16_to_cpu(ant_mimo->rx_ant_mode));
 476         } else {
 477                 priv->tx_ant = le16_to_cpu(ant_siso->ant_mode);
 478                 priv->rx_ant = le16_to_cpu(ant_siso->ant_mode);
 479                 mwifiex_dbg(adapter, INFO,
 480                             "RF_ANT_RESP: action = 0x%x, Mode = 0x%04x\n",
 481                             le16_to_cpu(ant_siso->action),
 482                             le16_to_cpu(ant_siso->ant_mode));
 483         }
 484         return 0;
 485 }
 486 
 487 /*
 488  * This function handles the command response of set/get MAC address.
 489  *
 490  * Handling includes saving the MAC address in driver.
 491  */
 492 static int mwifiex_ret_802_11_mac_address(struct mwifiex_private *priv,
 493                                           struct host_cmd_ds_command *resp)
 494 {
 495         struct host_cmd_ds_802_11_mac_address *cmd_mac_addr =
 496                                                         &resp->params.mac_addr;
 497 
 498         memcpy(priv->curr_addr, cmd_mac_addr->mac_addr, ETH_ALEN);
 499 
 500         mwifiex_dbg(priv->adapter, INFO,
 501                     "info: set mac address: %pM\n", priv->curr_addr);
 502 
 503         return 0;
 504 }
 505 
 506 /*
 507  * This function handles the command response of set/get MAC multicast
 508  * address.
 509  */
 510 static int mwifiex_ret_mac_multicast_adr(struct mwifiex_private *priv,
 511                                          struct host_cmd_ds_command *resp)
 512 {
 513         return 0;
 514 }
 515 
 516 /*
 517  * This function handles the command response of get Tx rate query.
 518  *
 519  * Handling includes changing the header fields into CPU format
 520  * and saving the Tx rate and HT information parameters in driver.
 521  *
 522  * Both rate configuration and current data rate can be retrieved
 523  * with this request.
 524  */
 525 static int mwifiex_ret_802_11_tx_rate_query(struct mwifiex_private *priv,
 526                                             struct host_cmd_ds_command *resp)
 527 {
 528         priv->tx_rate = resp->params.tx_rate.tx_rate;
 529         priv->tx_htinfo = resp->params.tx_rate.ht_info;
 530         if (!priv->is_data_rate_auto)
 531                 priv->data_rate =
 532                         mwifiex_index_to_data_rate(priv, priv->tx_rate,
 533                                                    priv->tx_htinfo);
 534 
 535         return 0;
 536 }
 537 
 538 /*
 539  * This function handles the command response of a deauthenticate
 540  * command.
 541  *
 542  * If the deauthenticated MAC matches the current BSS MAC, the connection
 543  * state is reset.
 544  */
 545 static int mwifiex_ret_802_11_deauthenticate(struct mwifiex_private *priv,
 546                                              struct host_cmd_ds_command *resp)
 547 {
 548         struct mwifiex_adapter *adapter = priv->adapter;
 549 
 550         adapter->dbg.num_cmd_deauth++;
 551         if (!memcmp(resp->params.deauth.mac_addr,
 552                     &priv->curr_bss_params.bss_descriptor.mac_address,
 553                     sizeof(resp->params.deauth.mac_addr)))
 554                 mwifiex_reset_connect_state(priv, WLAN_REASON_DEAUTH_LEAVING,
 555                                             false);
 556 
 557         return 0;
 558 }
 559 
 560 /*
 561  * This function handles the command response of ad-hoc stop.
 562  *
 563  * The function resets the connection state in driver.
 564  */
 565 static int mwifiex_ret_802_11_ad_hoc_stop(struct mwifiex_private *priv,
 566                                           struct host_cmd_ds_command *resp)
 567 {
 568         mwifiex_reset_connect_state(priv, WLAN_REASON_DEAUTH_LEAVING, false);
 569         return 0;
 570 }
 571 
 572 /*
 573  * This function handles the command response of set/get v1 key material.
 574  *
 575  * Handling includes updating the driver parameters to reflect the
 576  * changes.
 577  */
 578 static int mwifiex_ret_802_11_key_material_v1(struct mwifiex_private *priv,
 579                                               struct host_cmd_ds_command *resp)
 580 {
 581         struct host_cmd_ds_802_11_key_material *key =
 582                                                 &resp->params.key_material;
 583 
 584         if (le16_to_cpu(key->action) == HostCmd_ACT_GEN_SET) {
 585                 if ((le16_to_cpu(key->key_param_set.key_info) & KEY_MCAST)) {
 586                         mwifiex_dbg(priv->adapter, INFO,
 587                                     "info: key: GTK is set\n");
 588                         priv->wpa_is_gtk_set = true;
 589                         priv->scan_block = false;
 590                         priv->port_open = true;
 591                 }
 592         }
 593 
 594         memset(priv->aes_key.key_param_set.key, 0,
 595                sizeof(key->key_param_set.key));
 596         priv->aes_key.key_param_set.key_len = key->key_param_set.key_len;
 597         memcpy(priv->aes_key.key_param_set.key, key->key_param_set.key,
 598                le16_to_cpu(priv->aes_key.key_param_set.key_len));
 599 
 600         return 0;
 601 }
 602 
 603 /*
 604  * This function handles the command response of set/get v2 key material.
 605  *
 606  * Handling includes updating the driver parameters to reflect the
 607  * changes.
 608  */
 609 static int mwifiex_ret_802_11_key_material_v2(struct mwifiex_private *priv,
 610                                               struct host_cmd_ds_command *resp)
 611 {
 612         struct host_cmd_ds_802_11_key_material_v2 *key_v2;
 613         __le16 len;
 614 
 615         key_v2 = &resp->params.key_material_v2;
 616         if (le16_to_cpu(key_v2->action) == HostCmd_ACT_GEN_SET) {
 617                 if ((le16_to_cpu(key_v2->key_param_set.key_info) & KEY_MCAST)) {
 618                         mwifiex_dbg(priv->adapter, INFO, "info: key: GTK is set\n");
 619                         priv->wpa_is_gtk_set = true;
 620                         priv->scan_block = false;
 621                         priv->port_open = true;
 622                 }
 623         }
 624 
 625         if (key_v2->key_param_set.key_type != KEY_TYPE_ID_AES)
 626                 return 0;
 627 
 628         memset(priv->aes_key_v2.key_param_set.key_params.aes.key, 0,
 629                WLAN_KEY_LEN_CCMP);
 630         priv->aes_key_v2.key_param_set.key_params.aes.key_len =
 631                                 key_v2->key_param_set.key_params.aes.key_len;
 632         len = priv->aes_key_v2.key_param_set.key_params.aes.key_len;
 633         memcpy(priv->aes_key_v2.key_param_set.key_params.aes.key,
 634                key_v2->key_param_set.key_params.aes.key, le16_to_cpu(len));
 635 
 636         return 0;
 637 }
 638 
 639 /* Wrapper function for processing response of key material command */
 640 static int mwifiex_ret_802_11_key_material(struct mwifiex_private *priv,
 641                                            struct host_cmd_ds_command *resp)
 642 {
 643         if (priv->adapter->key_api_major_ver == KEY_API_VER_MAJOR_V2)
 644                 return mwifiex_ret_802_11_key_material_v2(priv, resp);
 645         else
 646                 return mwifiex_ret_802_11_key_material_v1(priv, resp);
 647 }
 648 
 649 /*
 650  * This function handles the command response of get 11d domain information.
 651  */
 652 static int mwifiex_ret_802_11d_domain_info(struct mwifiex_private *priv,
 653                                            struct host_cmd_ds_command *resp)
 654 {
 655         struct host_cmd_ds_802_11d_domain_info_rsp *domain_info =
 656                 &resp->params.domain_info_resp;
 657         struct mwifiex_ietypes_domain_param_set *domain = &domain_info->domain;
 658         u16 action = le16_to_cpu(domain_info->action);
 659         u8 no_of_triplet;
 660 
 661         no_of_triplet = (u8) ((le16_to_cpu(domain->header.len)
 662                                 - IEEE80211_COUNTRY_STRING_LEN)
 663                               / sizeof(struct ieee80211_country_ie_triplet));
 664 
 665         mwifiex_dbg(priv->adapter, INFO,
 666                     "info: 11D Domain Info Resp: no_of_triplet=%d\n",
 667                     no_of_triplet);
 668 
 669         if (no_of_triplet > MWIFIEX_MAX_TRIPLET_802_11D) {
 670                 mwifiex_dbg(priv->adapter, FATAL,
 671                             "11D: invalid number of triplets %d returned\n",
 672                             no_of_triplet);
 673                 return -1;
 674         }
 675 
 676         switch (action) {
 677         case HostCmd_ACT_GEN_SET:  /* Proc Set Action */
 678                 break;
 679         case HostCmd_ACT_GEN_GET:
 680                 break;
 681         default:
 682                 mwifiex_dbg(priv->adapter, ERROR,
 683                             "11D: invalid action:%d\n", domain_info->action);
 684                 return -1;
 685         }
 686 
 687         return 0;
 688 }
 689 
 690 /*
 691  * This function handles the command response of get extended version.
 692  *
 693  * Handling includes forming the extended version string and sending it
 694  * to application.
 695  */
 696 static int mwifiex_ret_ver_ext(struct mwifiex_private *priv,
 697                                struct host_cmd_ds_command *resp,
 698                                struct host_cmd_ds_version_ext *version_ext)
 699 {
 700         struct host_cmd_ds_version_ext *ver_ext = &resp->params.verext;
 701 
 702         if (version_ext) {
 703                 version_ext->version_str_sel = ver_ext->version_str_sel;
 704                 memcpy(version_ext->version_str, ver_ext->version_str,
 705                        sizeof(char) * 128);
 706                 memcpy(priv->version_str, ver_ext->version_str, 128);
 707         }
 708         return 0;
 709 }
 710 
 711 /*
 712  * This function handles the command response of remain on channel.
 713  */
 714 static int
 715 mwifiex_ret_remain_on_chan(struct mwifiex_private *priv,
 716                            struct host_cmd_ds_command *resp,
 717                            struct host_cmd_ds_remain_on_chan *roc_cfg)
 718 {
 719         struct host_cmd_ds_remain_on_chan *resp_cfg = &resp->params.roc_cfg;
 720 
 721         if (roc_cfg)
 722                 memcpy(roc_cfg, resp_cfg, sizeof(*roc_cfg));
 723 
 724         return 0;
 725 }
 726 
 727 /*
 728  * This function handles the command response of P2P mode cfg.
 729  */
 730 static int
 731 mwifiex_ret_p2p_mode_cfg(struct mwifiex_private *priv,
 732                          struct host_cmd_ds_command *resp,
 733                          void *data_buf)
 734 {
 735         struct host_cmd_ds_p2p_mode_cfg *mode_cfg = &resp->params.mode_cfg;
 736 
 737         if (data_buf)
 738                 put_unaligned_le16(le16_to_cpu(mode_cfg->mode), data_buf);
 739 
 740         return 0;
 741 }
 742 
 743 /* This function handles the command response of mem_access command
 744  */
 745 static int
 746 mwifiex_ret_mem_access(struct mwifiex_private *priv,
 747                        struct host_cmd_ds_command *resp, void *pioctl_buf)
 748 {
 749         struct host_cmd_ds_mem_access *mem = (void *)&resp->params.mem;
 750 
 751         priv->mem_rw.addr = le32_to_cpu(mem->addr);
 752         priv->mem_rw.value = le32_to_cpu(mem->value);
 753 
 754         return 0;
 755 }
 756 /*
 757  * This function handles the command response of register access.
 758  *
 759  * The register value and offset are returned to the user. For EEPROM
 760  * access, the byte count is also returned.
 761  */
 762 static int mwifiex_ret_reg_access(u16 type, struct host_cmd_ds_command *resp,
 763                                   void *data_buf)
 764 {
 765         struct mwifiex_ds_reg_rw *reg_rw;
 766         struct mwifiex_ds_read_eeprom *eeprom;
 767         union reg {
 768                 struct host_cmd_ds_mac_reg_access *mac;
 769                 struct host_cmd_ds_bbp_reg_access *bbp;
 770                 struct host_cmd_ds_rf_reg_access *rf;
 771                 struct host_cmd_ds_pmic_reg_access *pmic;
 772                 struct host_cmd_ds_802_11_eeprom_access *eeprom;
 773         } r;
 774 
 775         if (!data_buf)
 776                 return 0;
 777 
 778         reg_rw = data_buf;
 779         eeprom = data_buf;
 780         switch (type) {
 781         case HostCmd_CMD_MAC_REG_ACCESS:
 782                 r.mac = &resp->params.mac_reg;
 783                 reg_rw->offset = (u32) le16_to_cpu(r.mac->offset);
 784                 reg_rw->value = le32_to_cpu(r.mac->value);
 785                 break;
 786         case HostCmd_CMD_BBP_REG_ACCESS:
 787                 r.bbp = &resp->params.bbp_reg;
 788                 reg_rw->offset = (u32) le16_to_cpu(r.bbp->offset);
 789                 reg_rw->value = (u32) r.bbp->value;
 790                 break;
 791 
 792         case HostCmd_CMD_RF_REG_ACCESS:
 793                 r.rf = &resp->params.rf_reg;
 794                 reg_rw->offset = (u32) le16_to_cpu(r.rf->offset);
 795                 reg_rw->value = (u32) r.bbp->value;
 796                 break;
 797         case HostCmd_CMD_PMIC_REG_ACCESS:
 798                 r.pmic = &resp->params.pmic_reg;
 799                 reg_rw->offset = (u32) le16_to_cpu(r.pmic->offset);
 800                 reg_rw->value = (u32) r.pmic->value;
 801                 break;
 802         case HostCmd_CMD_CAU_REG_ACCESS:
 803                 r.rf = &resp->params.rf_reg;
 804                 reg_rw->offset = (u32) le16_to_cpu(r.rf->offset);
 805                 reg_rw->value = (u32) r.rf->value;
 806                 break;
 807         case HostCmd_CMD_802_11_EEPROM_ACCESS:
 808                 r.eeprom = &resp->params.eeprom;
 809                 pr_debug("info: EEPROM read len=%x\n",
 810                                 le16_to_cpu(r.eeprom->byte_count));
 811                 if (eeprom->byte_count < le16_to_cpu(r.eeprom->byte_count)) {
 812                         eeprom->byte_count = 0;
 813                         pr_debug("info: EEPROM read length is too big\n");
 814                         return -1;
 815                 }
 816                 eeprom->offset = le16_to_cpu(r.eeprom->offset);
 817                 eeprom->byte_count = le16_to_cpu(r.eeprom->byte_count);
 818                 if (eeprom->byte_count > 0)
 819                         memcpy(&eeprom->value, &r.eeprom->value,
 820                                min((u16)MAX_EEPROM_DATA, eeprom->byte_count));
 821                 break;
 822         default:
 823                 return -1;
 824         }
 825         return 0;
 826 }
 827 
 828 /*
 829  * This function handles the command response of get IBSS coalescing status.
 830  *
 831  * If the received BSSID is different than the current one, the current BSSID,
 832  * beacon interval, ATIM window and ERP information are updated, along with
 833  * changing the ad-hoc state accordingly.
 834  */
 835 static int mwifiex_ret_ibss_coalescing_status(struct mwifiex_private *priv,
 836                                               struct host_cmd_ds_command *resp)
 837 {
 838         struct host_cmd_ds_802_11_ibss_status *ibss_coal_resp =
 839                                         &(resp->params.ibss_coalescing);
 840 
 841         if (le16_to_cpu(ibss_coal_resp->action) == HostCmd_ACT_GEN_SET)
 842                 return 0;
 843 
 844         mwifiex_dbg(priv->adapter, INFO,
 845                     "info: new BSSID %pM\n", ibss_coal_resp->bssid);
 846 
 847         /* If rsp has NULL BSSID, Just return..... No Action */
 848         if (is_zero_ether_addr(ibss_coal_resp->bssid)) {
 849                 mwifiex_dbg(priv->adapter, FATAL, "new BSSID is NULL\n");
 850                 return 0;
 851         }
 852 
 853         /* If BSSID is diff, modify current BSS parameters */
 854         if (!ether_addr_equal(priv->curr_bss_params.bss_descriptor.mac_address, ibss_coal_resp->bssid)) {
 855                 /* BSSID */
 856                 memcpy(priv->curr_bss_params.bss_descriptor.mac_address,
 857                        ibss_coal_resp->bssid, ETH_ALEN);
 858 
 859                 /* Beacon Interval */
 860                 priv->curr_bss_params.bss_descriptor.beacon_period
 861                         = le16_to_cpu(ibss_coal_resp->beacon_interval);
 862 
 863                 /* ERP Information */
 864                 priv->curr_bss_params.bss_descriptor.erp_flags =
 865                         (u8) le16_to_cpu(ibss_coal_resp->use_g_rate_protect);
 866 
 867                 priv->adhoc_state = ADHOC_COALESCED;
 868         }
 869 
 870         return 0;
 871 }
 872 static int mwifiex_ret_tdls_oper(struct mwifiex_private *priv,
 873                                  struct host_cmd_ds_command *resp)
 874 {
 875         struct host_cmd_ds_tdls_oper *cmd_tdls_oper = &resp->params.tdls_oper;
 876         u16 reason = le16_to_cpu(cmd_tdls_oper->reason);
 877         u16 action = le16_to_cpu(cmd_tdls_oper->tdls_action);
 878         struct mwifiex_sta_node *node =
 879                            mwifiex_get_sta_entry(priv, cmd_tdls_oper->peer_mac);
 880 
 881         switch (action) {
 882         case ACT_TDLS_DELETE:
 883                 if (reason) {
 884                         if (!node || reason == TDLS_ERR_LINK_NONEXISTENT)
 885                                 mwifiex_dbg(priv->adapter, MSG,
 886                                             "TDLS link delete for %pM failed: reason %d\n",
 887                                             cmd_tdls_oper->peer_mac, reason);
 888                         else
 889                                 mwifiex_dbg(priv->adapter, ERROR,
 890                                             "TDLS link delete for %pM failed: reason %d\n",
 891                                             cmd_tdls_oper->peer_mac, reason);
 892                 } else {
 893                         mwifiex_dbg(priv->adapter, MSG,
 894                                     "TDLS link delete for %pM successful\n",
 895                                     cmd_tdls_oper->peer_mac);
 896                 }
 897                 break;
 898         case ACT_TDLS_CREATE:
 899                 if (reason) {
 900                         mwifiex_dbg(priv->adapter, ERROR,
 901                                     "TDLS link creation for %pM failed: reason %d",
 902                                     cmd_tdls_oper->peer_mac, reason);
 903                         if (node && reason != TDLS_ERR_LINK_EXISTS)
 904                                 node->tdls_status = TDLS_SETUP_FAILURE;
 905                 } else {
 906                         mwifiex_dbg(priv->adapter, MSG,
 907                                     "TDLS link creation for %pM successful",
 908                                     cmd_tdls_oper->peer_mac);
 909                 }
 910                 break;
 911         case ACT_TDLS_CONFIG:
 912                 if (reason) {
 913                         mwifiex_dbg(priv->adapter, ERROR,
 914                                     "TDLS link config for %pM failed, reason %d\n",
 915                                     cmd_tdls_oper->peer_mac, reason);
 916                         if (node)
 917                                 node->tdls_status = TDLS_SETUP_FAILURE;
 918                 } else {
 919                         mwifiex_dbg(priv->adapter, MSG,
 920                                     "TDLS link config for %pM successful\n",
 921                                     cmd_tdls_oper->peer_mac);
 922                 }
 923                 break;
 924         default:
 925                 mwifiex_dbg(priv->adapter, ERROR,
 926                             "Unknown TDLS command action response %d", action);
 927                 return -1;
 928         }
 929 
 930         return 0;
 931 }
 932 /*
 933  * This function handles the command response for subscribe event command.
 934  */
 935 static int mwifiex_ret_subsc_evt(struct mwifiex_private *priv,
 936                                  struct host_cmd_ds_command *resp)
 937 {
 938         struct host_cmd_ds_802_11_subsc_evt *cmd_sub_event =
 939                 &resp->params.subsc_evt;
 940 
 941         /* For every subscribe event command (Get/Set/Clear), FW reports the
 942          * current set of subscribed events*/
 943         mwifiex_dbg(priv->adapter, EVENT,
 944                     "Bitmap of currently subscribed events: %16x\n",
 945                     le16_to_cpu(cmd_sub_event->events));
 946 
 947         return 0;
 948 }
 949 
 950 static int mwifiex_ret_uap_sta_list(struct mwifiex_private *priv,
 951                                     struct host_cmd_ds_command *resp)
 952 {
 953         struct host_cmd_ds_sta_list *sta_list =
 954                 &resp->params.sta_list;
 955         struct mwifiex_ie_types_sta_info *sta_info = (void *)&sta_list->tlv;
 956         int i;
 957         struct mwifiex_sta_node *sta_node;
 958 
 959         for (i = 0; i < (le16_to_cpu(sta_list->sta_count)); i++) {
 960                 sta_node = mwifiex_get_sta_entry(priv, sta_info->mac);
 961                 if (unlikely(!sta_node))
 962                         continue;
 963 
 964                 sta_node->stats.rssi = sta_info->rssi;
 965                 sta_info++;
 966         }
 967 
 968         return 0;
 969 }
 970 
 971 /* This function handles the command response of set_cfg_data */
 972 static int mwifiex_ret_cfg_data(struct mwifiex_private *priv,
 973                                 struct host_cmd_ds_command *resp)
 974 {
 975         if (resp->result != HostCmd_RESULT_OK) {
 976                 mwifiex_dbg(priv->adapter, ERROR, "Cal data cmd resp failed\n");
 977                 return -1;
 978         }
 979 
 980         return 0;
 981 }
 982 
 983 /** This Function handles the command response of sdio rx aggr */
 984 static int mwifiex_ret_sdio_rx_aggr_cfg(struct mwifiex_private *priv,
 985                                         struct host_cmd_ds_command *resp)
 986 {
 987         struct mwifiex_adapter *adapter = priv->adapter;
 988         struct host_cmd_sdio_sp_rx_aggr_cfg *cfg =
 989                                 &resp->params.sdio_rx_aggr_cfg;
 990 
 991         adapter->sdio_rx_aggr_enable = cfg->enable;
 992         adapter->sdio_rx_block_size = le16_to_cpu(cfg->block_size);
 993 
 994         return 0;
 995 }
 996 
 997 static int mwifiex_ret_robust_coex(struct mwifiex_private *priv,
 998                                    struct host_cmd_ds_command *resp,
 999                                    bool *is_timeshare)
1000 {
1001         struct host_cmd_ds_robust_coex *coex = &resp->params.coex;
1002         struct mwifiex_ie_types_robust_coex *coex_tlv;
1003         u16 action = le16_to_cpu(coex->action);
1004         u32 mode;
1005 
1006         coex_tlv = (struct mwifiex_ie_types_robust_coex
1007                     *)((u8 *)coex + sizeof(struct host_cmd_ds_robust_coex));
1008         if (action == HostCmd_ACT_GEN_GET) {
1009                 mode = le32_to_cpu(coex_tlv->mode);
1010                 if (mode == MWIFIEX_COEX_MODE_TIMESHARE)
1011                         *is_timeshare = true;
1012                 else
1013                         *is_timeshare = false;
1014         }
1015 
1016         return 0;
1017 }
1018 
1019 static struct ieee80211_regdomain *
1020 mwifiex_create_custom_regdomain(struct mwifiex_private *priv,
1021                                 u8 *buf, u16 buf_len)
1022 {
1023         u16 num_chan = buf_len / 2;
1024         struct ieee80211_regdomain *regd;
1025         struct ieee80211_reg_rule *rule;
1026         bool new_rule;
1027         int idx, freq, prev_freq = 0;
1028         u32 bw, prev_bw = 0;
1029         u8 chflags, prev_chflags = 0, valid_rules = 0;
1030 
1031         if (WARN_ON_ONCE(num_chan > NL80211_MAX_SUPP_REG_RULES))
1032                 return ERR_PTR(-EINVAL);
1033 
1034         regd = kzalloc(struct_size(regd, reg_rules, num_chan), GFP_KERNEL);
1035         if (!regd)
1036                 return ERR_PTR(-ENOMEM);
1037 
1038         for (idx = 0; idx < num_chan; idx++) {
1039                 u8 chan;
1040                 enum nl80211_band band;
1041 
1042                 chan = *buf++;
1043                 if (!chan) {
1044                         kfree(regd);
1045                         return NULL;
1046                 }
1047                 chflags = *buf++;
1048                 band = (chan <= 14) ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
1049                 freq = ieee80211_channel_to_frequency(chan, band);
1050                 new_rule = false;
1051 
1052                 if (chflags & MWIFIEX_CHANNEL_DISABLED)
1053                         continue;
1054 
1055                 if (band == NL80211_BAND_5GHZ) {
1056                         if (!(chflags & MWIFIEX_CHANNEL_NOHT80))
1057                                 bw = MHZ_TO_KHZ(80);
1058                         else if (!(chflags & MWIFIEX_CHANNEL_NOHT40))
1059                                 bw = MHZ_TO_KHZ(40);
1060                         else
1061                                 bw = MHZ_TO_KHZ(20);
1062                 } else {
1063                         if (!(chflags & MWIFIEX_CHANNEL_NOHT40))
1064                                 bw = MHZ_TO_KHZ(40);
1065                         else
1066                                 bw = MHZ_TO_KHZ(20);
1067                 }
1068 
1069                 if (idx == 0 || prev_chflags != chflags || prev_bw != bw ||
1070                     freq - prev_freq > 20) {
1071                         valid_rules++;
1072                         new_rule = true;
1073                 }
1074 
1075                 rule = &regd->reg_rules[valid_rules - 1];
1076 
1077                 rule->freq_range.end_freq_khz = MHZ_TO_KHZ(freq + 10);
1078 
1079                 prev_chflags = chflags;
1080                 prev_freq = freq;
1081                 prev_bw = bw;
1082 
1083                 if (!new_rule)
1084                         continue;
1085 
1086                 rule->freq_range.start_freq_khz = MHZ_TO_KHZ(freq - 10);
1087                 rule->power_rule.max_eirp = DBM_TO_MBM(19);
1088 
1089                 if (chflags & MWIFIEX_CHANNEL_PASSIVE)
1090                         rule->flags = NL80211_RRF_NO_IR;
1091 
1092                 if (chflags & MWIFIEX_CHANNEL_DFS)
1093                         rule->flags = NL80211_RRF_DFS;
1094 
1095                 rule->freq_range.max_bandwidth_khz = bw;
1096         }
1097 
1098         regd->n_reg_rules = valid_rules;
1099         regd->alpha2[0] = '9';
1100         regd->alpha2[1] = '9';
1101 
1102         return regd;
1103 }
1104 
1105 static int mwifiex_ret_chan_region_cfg(struct mwifiex_private *priv,
1106                                        struct host_cmd_ds_command *resp)
1107 {
1108         struct host_cmd_ds_chan_region_cfg *reg = &resp->params.reg_cfg;
1109         u16 action = le16_to_cpu(reg->action);
1110         u16 tlv, tlv_buf_len, tlv_buf_left;
1111         struct mwifiex_ie_types_header *head;
1112         struct ieee80211_regdomain *regd;
1113         u8 *tlv_buf;
1114 
1115         if (action != HostCmd_ACT_GEN_GET)
1116                 return 0;
1117 
1118         tlv_buf = (u8 *)reg + sizeof(*reg);
1119         tlv_buf_left = le16_to_cpu(resp->size) - S_DS_GEN - sizeof(*reg);
1120 
1121         while (tlv_buf_left >= sizeof(*head)) {
1122                 head = (struct mwifiex_ie_types_header *)tlv_buf;
1123                 tlv = le16_to_cpu(head->type);
1124                 tlv_buf_len = le16_to_cpu(head->len);
1125 
1126                 if (tlv_buf_left < (sizeof(*head) + tlv_buf_len))
1127                         break;
1128 
1129                 switch (tlv) {
1130                 case TLV_TYPE_CHAN_ATTR_CFG:
1131                         mwifiex_dbg_dump(priv->adapter, CMD_D, "CHAN:",
1132                                          (u8 *)head + sizeof(*head),
1133                                          tlv_buf_len);
1134                         regd = mwifiex_create_custom_regdomain(priv,
1135                                 (u8 *)head + sizeof(*head), tlv_buf_len);
1136                         if (!IS_ERR(regd))
1137                                 priv->adapter->regd = regd;
1138                         break;
1139                 }
1140 
1141                 tlv_buf += (sizeof(*head) + tlv_buf_len);
1142                 tlv_buf_left -= (sizeof(*head) + tlv_buf_len);
1143         }
1144 
1145         return 0;
1146 }
1147 
1148 static int mwifiex_ret_pkt_aggr_ctrl(struct mwifiex_private *priv,
1149                                      struct host_cmd_ds_command *resp)
1150 {
1151         struct host_cmd_ds_pkt_aggr_ctrl *pkt_aggr_ctrl =
1152                                         &resp->params.pkt_aggr_ctrl;
1153         struct mwifiex_adapter *adapter = priv->adapter;
1154 
1155         adapter->bus_aggr.enable = le16_to_cpu(pkt_aggr_ctrl->enable);
1156         if (adapter->bus_aggr.enable)
1157                 adapter->intf_hdr_len = INTF_HEADER_LEN;
1158         adapter->bus_aggr.mode = MWIFIEX_BUS_AGGR_MODE_LEN_V2;
1159         adapter->bus_aggr.tx_aggr_max_size =
1160                                 le16_to_cpu(pkt_aggr_ctrl->tx_aggr_max_size);
1161         adapter->bus_aggr.tx_aggr_max_num =
1162                                 le16_to_cpu(pkt_aggr_ctrl->tx_aggr_max_num);
1163         adapter->bus_aggr.tx_aggr_align =
1164                                 le16_to_cpu(pkt_aggr_ctrl->tx_aggr_align);
1165 
1166         return 0;
1167 }
1168 
1169 static int mwifiex_ret_get_chan_info(struct mwifiex_private *priv,
1170                                      struct host_cmd_ds_command *resp,
1171                                      struct mwifiex_channel_band *channel_band)
1172 {
1173         struct host_cmd_ds_sta_configure *sta_cfg_cmd = &resp->params.sta_cfg;
1174         struct host_cmd_tlv_channel_band *tlv_band_channel;
1175 
1176         tlv_band_channel =
1177         (struct host_cmd_tlv_channel_band *)sta_cfg_cmd->tlv_buffer;
1178         memcpy(&channel_band->band_config, &tlv_band_channel->band_config,
1179                sizeof(struct mwifiex_band_config));
1180         channel_band->channel = tlv_band_channel->channel;
1181 
1182         return 0;
1183 }
1184 
1185 /*
1186  * This function handles the command responses.
1187  *
1188  * This is a generic function, which calls command specific
1189  * response handlers based on the command ID.
1190  */
1191 int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
1192                                 struct host_cmd_ds_command *resp)
1193 {
1194         int ret = 0;
1195         struct mwifiex_adapter *adapter = priv->adapter;
1196         void *data_buf = adapter->curr_cmd->data_buf;
1197 
1198         /* If the command is not successful, cleanup and return failure */
1199         if (resp->result != HostCmd_RESULT_OK) {
1200                 mwifiex_process_cmdresp_error(priv, resp);
1201                 return -1;
1202         }
1203         /* Command successful, handle response */
1204         switch (cmdresp_no) {
1205         case HostCmd_CMD_GET_HW_SPEC:
1206                 ret = mwifiex_ret_get_hw_spec(priv, resp);
1207                 break;
1208         case HostCmd_CMD_CFG_DATA:
1209                 ret = mwifiex_ret_cfg_data(priv, resp);
1210                 break;
1211         case HostCmd_CMD_MAC_CONTROL:
1212                 break;
1213         case HostCmd_CMD_802_11_MAC_ADDRESS:
1214                 ret = mwifiex_ret_802_11_mac_address(priv, resp);
1215                 break;
1216         case HostCmd_CMD_MAC_MULTICAST_ADR:
1217                 ret = mwifiex_ret_mac_multicast_adr(priv, resp);
1218                 break;
1219         case HostCmd_CMD_TX_RATE_CFG:
1220                 ret = mwifiex_ret_tx_rate_cfg(priv, resp);
1221                 break;
1222         case HostCmd_CMD_802_11_SCAN:
1223                 ret = mwifiex_ret_802_11_scan(priv, resp);
1224                 adapter->curr_cmd->wait_q_enabled = false;
1225                 break;
1226         case HostCmd_CMD_802_11_SCAN_EXT:
1227                 ret = mwifiex_ret_802_11_scan_ext(priv, resp);
1228                 adapter->curr_cmd->wait_q_enabled = false;
1229                 break;
1230         case HostCmd_CMD_802_11_BG_SCAN_QUERY:
1231                 ret = mwifiex_ret_802_11_scan(priv, resp);
1232                 cfg80211_sched_scan_results(priv->wdev.wiphy, 0);
1233                 mwifiex_dbg(adapter, CMD,
1234                             "info: CMD_RESP: BG_SCAN result is ready!\n");
1235                 break;
1236         case HostCmd_CMD_802_11_BG_SCAN_CONFIG:
1237                 break;
1238         case HostCmd_CMD_TXPWR_CFG:
1239                 ret = mwifiex_ret_tx_power_cfg(priv, resp);
1240                 break;
1241         case HostCmd_CMD_RF_TX_PWR:
1242                 ret = mwifiex_ret_rf_tx_power(priv, resp);
1243                 break;
1244         case HostCmd_CMD_RF_ANTENNA:
1245                 ret = mwifiex_ret_rf_antenna(priv, resp);
1246                 break;
1247         case HostCmd_CMD_802_11_PS_MODE_ENH:
1248                 ret = mwifiex_ret_enh_power_mode(priv, resp, data_buf);
1249                 break;
1250         case HostCmd_CMD_802_11_HS_CFG_ENH:
1251                 ret = mwifiex_ret_802_11_hs_cfg(priv, resp);
1252                 break;
1253         case HostCmd_CMD_802_11_ASSOCIATE:
1254                 ret = mwifiex_ret_802_11_associate(priv, resp);
1255                 break;
1256         case HostCmd_CMD_802_11_DEAUTHENTICATE:
1257                 ret = mwifiex_ret_802_11_deauthenticate(priv, resp);
1258                 break;
1259         case HostCmd_CMD_802_11_AD_HOC_START:
1260         case HostCmd_CMD_802_11_AD_HOC_JOIN:
1261                 ret = mwifiex_ret_802_11_ad_hoc(priv, resp);
1262                 break;
1263         case HostCmd_CMD_802_11_AD_HOC_STOP:
1264                 ret = mwifiex_ret_802_11_ad_hoc_stop(priv, resp);
1265                 break;
1266         case HostCmd_CMD_802_11_GET_LOG:
1267                 ret = mwifiex_ret_get_log(priv, resp, data_buf);
1268                 break;
1269         case HostCmd_CMD_RSSI_INFO:
1270                 ret = mwifiex_ret_802_11_rssi_info(priv, resp);
1271                 break;
1272         case HostCmd_CMD_802_11_SNMP_MIB:
1273                 ret = mwifiex_ret_802_11_snmp_mib(priv, resp, data_buf);
1274                 break;
1275         case HostCmd_CMD_802_11_TX_RATE_QUERY:
1276                 ret = mwifiex_ret_802_11_tx_rate_query(priv, resp);
1277                 break;
1278         case HostCmd_CMD_VERSION_EXT:
1279                 ret = mwifiex_ret_ver_ext(priv, resp, data_buf);
1280                 break;
1281         case HostCmd_CMD_REMAIN_ON_CHAN:
1282                 ret = mwifiex_ret_remain_on_chan(priv, resp, data_buf);
1283                 break;
1284         case HostCmd_CMD_11AC_CFG:
1285                 break;
1286         case HostCmd_CMD_PACKET_AGGR_CTRL:
1287                 ret = mwifiex_ret_pkt_aggr_ctrl(priv, resp);
1288                 break;
1289         case HostCmd_CMD_P2P_MODE_CFG:
1290                 ret = mwifiex_ret_p2p_mode_cfg(priv, resp, data_buf);
1291                 break;
1292         case HostCmd_CMD_MGMT_FRAME_REG:
1293         case HostCmd_CMD_FUNC_INIT:
1294         case HostCmd_CMD_FUNC_SHUTDOWN:
1295                 break;
1296         case HostCmd_CMD_802_11_KEY_MATERIAL:
1297                 ret = mwifiex_ret_802_11_key_material(priv, resp);
1298                 break;
1299         case HostCmd_CMD_802_11D_DOMAIN_INFO:
1300                 ret = mwifiex_ret_802_11d_domain_info(priv, resp);
1301                 break;
1302         case HostCmd_CMD_11N_ADDBA_REQ:
1303                 ret = mwifiex_ret_11n_addba_req(priv, resp);
1304                 break;
1305         case HostCmd_CMD_11N_DELBA:
1306                 ret = mwifiex_ret_11n_delba(priv, resp);
1307                 break;
1308         case HostCmd_CMD_11N_ADDBA_RSP:
1309                 ret = mwifiex_ret_11n_addba_resp(priv, resp);
1310                 break;
1311         case HostCmd_CMD_RECONFIGURE_TX_BUFF:
1312                 if (0xffff == (u16)le16_to_cpu(resp->params.tx_buf.buff_size)) {
1313                         if (adapter->iface_type == MWIFIEX_USB &&
1314                             adapter->usb_mc_setup) {
1315                                 if (adapter->if_ops.multi_port_resync)
1316                                         adapter->if_ops.
1317                                                 multi_port_resync(adapter);
1318                                 adapter->usb_mc_setup = false;
1319                                 adapter->tx_lock_flag = false;
1320                         }
1321                         break;
1322                 }
1323                 adapter->tx_buf_size = (u16) le16_to_cpu(resp->params.
1324                                                              tx_buf.buff_size);
1325                 adapter->tx_buf_size = (adapter->tx_buf_size
1326                                         / MWIFIEX_SDIO_BLOCK_SIZE)
1327                                        * MWIFIEX_SDIO_BLOCK_SIZE;
1328                 adapter->curr_tx_buf_size = adapter->tx_buf_size;
1329                 mwifiex_dbg(adapter, CMD, "cmd: curr_tx_buf_size=%d\n",
1330                             adapter->curr_tx_buf_size);
1331 
1332                 if (adapter->if_ops.update_mp_end_port)
1333                         adapter->if_ops.update_mp_end_port(adapter,
1334                                 le16_to_cpu(resp->params.tx_buf.mp_end_port));
1335                 break;
1336         case HostCmd_CMD_AMSDU_AGGR_CTRL:
1337                 break;
1338         case HostCmd_CMD_WMM_GET_STATUS:
1339                 ret = mwifiex_ret_wmm_get_status(priv, resp);
1340                 break;
1341         case HostCmd_CMD_802_11_IBSS_COALESCING_STATUS:
1342                 ret = mwifiex_ret_ibss_coalescing_status(priv, resp);
1343                 break;
1344         case HostCmd_CMD_MEM_ACCESS:
1345                 ret = mwifiex_ret_mem_access(priv, resp, data_buf);
1346                 break;
1347         case HostCmd_CMD_MAC_REG_ACCESS:
1348         case HostCmd_CMD_BBP_REG_ACCESS:
1349         case HostCmd_CMD_RF_REG_ACCESS:
1350         case HostCmd_CMD_PMIC_REG_ACCESS:
1351         case HostCmd_CMD_CAU_REG_ACCESS:
1352         case HostCmd_CMD_802_11_EEPROM_ACCESS:
1353                 ret = mwifiex_ret_reg_access(cmdresp_no, resp, data_buf);
1354                 break;
1355         case HostCmd_CMD_SET_BSS_MODE:
1356                 break;
1357         case HostCmd_CMD_11N_CFG:
1358                 break;
1359         case HostCmd_CMD_PCIE_DESC_DETAILS:
1360                 break;
1361         case HostCmd_CMD_802_11_SUBSCRIBE_EVENT:
1362                 ret = mwifiex_ret_subsc_evt(priv, resp);
1363                 break;
1364         case HostCmd_CMD_UAP_SYS_CONFIG:
1365                 break;
1366         case HOST_CMD_APCMD_STA_LIST:
1367                 ret = mwifiex_ret_uap_sta_list(priv, resp);
1368                 break;
1369         case HostCmd_CMD_UAP_BSS_START:
1370                 adapter->tx_lock_flag = false;
1371                 adapter->pps_uapsd_mode = false;
1372                 adapter->delay_null_pkt = false;
1373                 priv->bss_started = 1;
1374                 break;
1375         case HostCmd_CMD_UAP_BSS_STOP:
1376                 priv->bss_started = 0;
1377                 break;
1378         case HostCmd_CMD_UAP_STA_DEAUTH:
1379                 break;
1380         case HOST_CMD_APCMD_SYS_RESET:
1381                 break;
1382         case HostCmd_CMD_MEF_CFG:
1383                 break;
1384         case HostCmd_CMD_COALESCE_CFG:
1385                 break;
1386         case HostCmd_CMD_TDLS_OPER:
1387                 ret = mwifiex_ret_tdls_oper(priv, resp);
1388         case HostCmd_CMD_MC_POLICY:
1389                 break;
1390         case HostCmd_CMD_CHAN_REPORT_REQUEST:
1391                 break;
1392         case HostCmd_CMD_SDIO_SP_RX_AGGR_CFG:
1393                 ret = mwifiex_ret_sdio_rx_aggr_cfg(priv, resp);
1394                 break;
1395         case HostCmd_CMD_HS_WAKEUP_REASON:
1396                 ret = mwifiex_ret_wakeup_reason(priv, resp, data_buf);
1397                 break;
1398         case HostCmd_CMD_TDLS_CONFIG:
1399                 break;
1400         case HostCmd_CMD_ROBUST_COEX:
1401                 ret = mwifiex_ret_robust_coex(priv, resp, data_buf);
1402                 break;
1403         case HostCmd_CMD_GTK_REKEY_OFFLOAD_CFG:
1404                 break;
1405         case HostCmd_CMD_CHAN_REGION_CFG:
1406                 ret = mwifiex_ret_chan_region_cfg(priv, resp);
1407                 break;
1408         case HostCmd_CMD_STA_CONFIGURE:
1409                 ret = mwifiex_ret_get_chan_info(priv, resp, data_buf);
1410                 break;
1411         default:
1412                 mwifiex_dbg(adapter, ERROR,
1413                             "CMD_RESP: unknown cmd response %#x\n",
1414                             resp->command);
1415                 break;
1416         }
1417 
1418         return ret;
1419 }
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c

DEFINITIONS
