root/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. iwl_eeprom_query16
  2. eeprom_indirect_address
  3. iwl_eeprom_query_addr
  4. iwl_eeprom_read_calib
  5. iwl_get_max_txpwr_half_dbm
  6. iwl_eeprom_enh_txp_read_element
  7. iwl_eeprom_enhanced_txpower
  8. iwl_init_band_reference
  9. iwl_mod_ht40_chan_info
  10. iwl_init_channel_map
  11. iwl_init_sband_channels
  12. iwl_init_ht_hw_capab
  13. iwl_init_sbands
  14. iwl_parse_eeprom_data

   1 /******************************************************************************
   2  *
   3  * This file is provided under a dual BSD/GPLv2 license.  When using or
   4  * redistributing this file, you may do so under either license.
   5  *
   6  * GPL LICENSE SUMMARY
   7  *
   8  * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
   9  * Copyright(c) 2015 Intel Mobile Communications GmbH
  10  * Copyright(c) 2018 - 2019 Intel Corporation
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of version 2 of the GNU General Public License as
  14  * published by the Free Software Foundation.
  15  *
  16  * This program is distributed in the hope that it will be useful, but
  17  * WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  19  * General Public License for more details.
  20  *
  21  * The full GNU General Public License is included in this distribution
  22  * in the file called COPYING.
  23  *
  24  * Contact Information:
  25  *  Intel Linux Wireless <linuxwifi@intel.com>
  26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27  *
  28  * BSD LICENSE
  29  *
  30  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
  31  * Copyright(c) 2015 Intel Mobile Communications GmbH
  32  * Copyright(c) 2018 - 2019 Intel Corporation
  33  * All rights reserved.
  34  *
  35  * Redistribution and use in source and binary forms, with or without
  36  * modification, are permitted provided that the following conditions
  37  * are met:
  38  *
  39  *  * Redistributions of source code must retain the above copyright
  40  *    notice, this list of conditions and the following disclaimer.
  41  *  * Redistributions in binary form must reproduce the above copyright
  42  *    notice, this list of conditions and the following disclaimer in
  43  *    the documentation and/or other materials provided with the
  44  *    distribution.
  45  *  * Neither the name Intel Corporation nor the names of its
  46  *    contributors may be used to endorse or promote products derived
  47  *    from this software without specific prior written permission.
  48  *
  49  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  50  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  51  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  52  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  53  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  54  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  55  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  56  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  57  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  58  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  59  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  60  *****************************************************************************/
  61 #include <linux/types.h>
  62 #include <linux/slab.h>
  63 #include <linux/export.h>
  64 #include "iwl-drv.h"
  65 #include "iwl-modparams.h"
  66 #include "iwl-eeprom-parse.h"
  67 
  68 /* EEPROM offset definitions */
  69 
  70 /* indirect access definitions */
  71 #define ADDRESS_MSK                 0x0000FFFF
  72 #define INDIRECT_TYPE_MSK           0x000F0000
  73 #define INDIRECT_HOST               0x00010000
  74 #define INDIRECT_GENERAL            0x00020000
  75 #define INDIRECT_REGULATORY         0x00030000
  76 #define INDIRECT_CALIBRATION        0x00040000
  77 #define INDIRECT_PROCESS_ADJST      0x00050000
  78 #define INDIRECT_OTHERS             0x00060000
  79 #define INDIRECT_TXP_LIMIT          0x00070000
  80 #define INDIRECT_TXP_LIMIT_SIZE     0x00080000
  81 #define INDIRECT_ADDRESS            0x00100000
  82 
  83 /* corresponding link offsets in EEPROM */
  84 #define EEPROM_LINK_HOST             (2*0x64)
  85 #define EEPROM_LINK_GENERAL          (2*0x65)
  86 #define EEPROM_LINK_REGULATORY       (2*0x66)
  87 #define EEPROM_LINK_CALIBRATION      (2*0x67)
  88 #define EEPROM_LINK_PROCESS_ADJST    (2*0x68)
  89 #define EEPROM_LINK_OTHERS           (2*0x69)
  90 #define EEPROM_LINK_TXP_LIMIT        (2*0x6a)
  91 #define EEPROM_LINK_TXP_LIMIT_SIZE   (2*0x6b)
  92 
  93 /* General */
  94 #define EEPROM_DEVICE_ID                    (2*0x08)    /* 2 bytes */
  95 #define EEPROM_SUBSYSTEM_ID                 (2*0x0A)    /* 2 bytes */
  96 #define EEPROM_MAC_ADDRESS                  (2*0x15)    /* 6  bytes */
  97 #define EEPROM_BOARD_REVISION               (2*0x35)    /* 2  bytes */
  98 #define EEPROM_BOARD_PBA_NUMBER             (2*0x3B+1)  /* 9  bytes */
  99 #define EEPROM_VERSION                      (2*0x44)    /* 2  bytes */
 100 #define EEPROM_SKU_CAP                      (2*0x45)    /* 2  bytes */
 101 #define EEPROM_OEM_MODE                     (2*0x46)    /* 2  bytes */
 102 #define EEPROM_RADIO_CONFIG                 (2*0x48)    /* 2  bytes */
 103 #define EEPROM_NUM_MAC_ADDRESS              (2*0x4C)    /* 2  bytes */
 104 
 105 /* calibration */
 106 struct iwl_eeprom_calib_hdr {
 107         u8 version;
 108         u8 pa_type;
 109         __le16 voltage;
 110 } __packed;
 111 
 112 #define EEPROM_CALIB_ALL        (INDIRECT_ADDRESS | INDIRECT_CALIBRATION)
 113 #define EEPROM_XTAL             ((2*0x128) | EEPROM_CALIB_ALL)
 114 
 115 /* temperature */
 116 #define EEPROM_KELVIN_TEMPERATURE       ((2*0x12A) | EEPROM_CALIB_ALL)
 117 #define EEPROM_RAW_TEMPERATURE          ((2*0x12B) | EEPROM_CALIB_ALL)
 118 
 119 /* SKU Capabilities (actual values from EEPROM definition) */
 120 enum eeprom_sku_bits {
 121         EEPROM_SKU_CAP_BAND_24GHZ       = BIT(4),
 122         EEPROM_SKU_CAP_BAND_52GHZ       = BIT(5),
 123         EEPROM_SKU_CAP_11N_ENABLE       = BIT(6),
 124         EEPROM_SKU_CAP_AMT_ENABLE       = BIT(7),
 125         EEPROM_SKU_CAP_IPAN_ENABLE      = BIT(8)
 126 };
 127 
 128 /* radio config bits (actual values from EEPROM definition) */
 129 #define EEPROM_RF_CFG_TYPE_MSK(x)   (x & 0x3)         /* bits 0-1   */
 130 #define EEPROM_RF_CFG_STEP_MSK(x)   ((x >> 2)  & 0x3) /* bits 2-3   */
 131 #define EEPROM_RF_CFG_DASH_MSK(x)   ((x >> 4)  & 0x3) /* bits 4-5   */
 132 #define EEPROM_RF_CFG_PNUM_MSK(x)   ((x >> 6)  & 0x3) /* bits 6-7   */
 133 #define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8)  & 0xF) /* bits 8-11  */
 134 #define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
 135 
 136 
 137 /*
 138  * EEPROM bands
 139  * These are the channel numbers from each band in the order
 140  * that they are stored in the EEPROM band information. Note
 141  * that EEPROM bands aren't the same as mac80211 bands, and
 142  * there are even special "ht40 bands" in the EEPROM.
 143  */
 144 static const u8 iwl_eeprom_band_1[14] = { /* 2.4 GHz */
 145         1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
 146 };
 147 
 148 static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
 149         183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
 150 };
 151 
 152 static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
 153         34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
 154 };
 155 
 156 static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
 157         100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
 158 };
 159 
 160 static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
 161         145, 149, 153, 157, 161, 165
 162 };
 163 
 164 static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */
 165         1, 2, 3, 4, 5, 6, 7
 166 };
 167 
 168 static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */
 169         36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
 170 };
 171 
 172 #define IWL_NUM_CHANNELS        (ARRAY_SIZE(iwl_eeprom_band_1) + \
 173                                  ARRAY_SIZE(iwl_eeprom_band_2) + \
 174                                  ARRAY_SIZE(iwl_eeprom_band_3) + \
 175                                  ARRAY_SIZE(iwl_eeprom_band_4) + \
 176                                  ARRAY_SIZE(iwl_eeprom_band_5))
 177 
 178 /* rate data (static) */
 179 static struct ieee80211_rate iwl_cfg80211_rates[] = {
 180         { .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
 181         { .bitrate = 2 * 10, .hw_value = 1, .hw_value_short = 1,
 182           .flags = IEEE80211_RATE_SHORT_PREAMBLE, },
 183         { .bitrate = 5.5 * 10, .hw_value = 2, .hw_value_short = 2,
 184           .flags = IEEE80211_RATE_SHORT_PREAMBLE, },
 185         { .bitrate = 11 * 10, .hw_value = 3, .hw_value_short = 3,
 186           .flags = IEEE80211_RATE_SHORT_PREAMBLE, },
 187         { .bitrate = 6 * 10, .hw_value = 4, .hw_value_short = 4, },
 188         { .bitrate = 9 * 10, .hw_value = 5, .hw_value_short = 5, },
 189         { .bitrate = 12 * 10, .hw_value = 6, .hw_value_short = 6, },
 190         { .bitrate = 18 * 10, .hw_value = 7, .hw_value_short = 7, },
 191         { .bitrate = 24 * 10, .hw_value = 8, .hw_value_short = 8, },
 192         { .bitrate = 36 * 10, .hw_value = 9, .hw_value_short = 9, },
 193         { .bitrate = 48 * 10, .hw_value = 10, .hw_value_short = 10, },
 194         { .bitrate = 54 * 10, .hw_value = 11, .hw_value_short = 11, },
 195 };
 196 #define RATES_24_OFFS   0
 197 #define N_RATES_24      ARRAY_SIZE(iwl_cfg80211_rates)
 198 #define RATES_52_OFFS   4
 199 #define N_RATES_52      (N_RATES_24 - RATES_52_OFFS)
 200 
 201 /* EEPROM reading functions */
 202 
 203 static u16 iwl_eeprom_query16(const u8 *eeprom, size_t eeprom_size, int offset)
 204 {
 205         if (WARN_ON(offset + sizeof(u16) > eeprom_size))
 206                 return 0;
 207         return le16_to_cpup((__le16 *)(eeprom + offset));
 208 }
 209 
 210 static u32 eeprom_indirect_address(const u8 *eeprom, size_t eeprom_size,
 211                                    u32 address)
 212 {
 213         u16 offset = 0;
 214 
 215         if ((address & INDIRECT_ADDRESS) == 0)
 216                 return address;
 217 
 218         switch (address & INDIRECT_TYPE_MSK) {
 219         case INDIRECT_HOST:
 220                 offset = iwl_eeprom_query16(eeprom, eeprom_size,
 221                                             EEPROM_LINK_HOST);
 222                 break;
 223         case INDIRECT_GENERAL:
 224                 offset = iwl_eeprom_query16(eeprom, eeprom_size,
 225                                             EEPROM_LINK_GENERAL);
 226                 break;
 227         case INDIRECT_REGULATORY:
 228                 offset = iwl_eeprom_query16(eeprom, eeprom_size,
 229                                             EEPROM_LINK_REGULATORY);
 230                 break;
 231         case INDIRECT_TXP_LIMIT:
 232                 offset = iwl_eeprom_query16(eeprom, eeprom_size,
 233                                             EEPROM_LINK_TXP_LIMIT);
 234                 break;
 235         case INDIRECT_TXP_LIMIT_SIZE:
 236                 offset = iwl_eeprom_query16(eeprom, eeprom_size,
 237                                             EEPROM_LINK_TXP_LIMIT_SIZE);
 238                 break;
 239         case INDIRECT_CALIBRATION:
 240                 offset = iwl_eeprom_query16(eeprom, eeprom_size,
 241                                             EEPROM_LINK_CALIBRATION);
 242                 break;
 243         case INDIRECT_PROCESS_ADJST:
 244                 offset = iwl_eeprom_query16(eeprom, eeprom_size,
 245                                             EEPROM_LINK_PROCESS_ADJST);
 246                 break;
 247         case INDIRECT_OTHERS:
 248                 offset = iwl_eeprom_query16(eeprom, eeprom_size,
 249                                             EEPROM_LINK_OTHERS);
 250                 break;
 251         default:
 252                 WARN_ON(1);
 253                 break;
 254         }
 255 
 256         /* translate the offset from words to byte */
 257         return (address & ADDRESS_MSK) + (offset << 1);
 258 }
 259 
 260 static const u8 *iwl_eeprom_query_addr(const u8 *eeprom, size_t eeprom_size,
 261                                        u32 offset)
 262 {
 263         u32 address = eeprom_indirect_address(eeprom, eeprom_size, offset);
 264 
 265         if (WARN_ON(address >= eeprom_size))
 266                 return NULL;
 267 
 268         return &eeprom[address];
 269 }
 270 
 271 static int iwl_eeprom_read_calib(const u8 *eeprom, size_t eeprom_size,
 272                                  struct iwl_nvm_data *data)
 273 {
 274         struct iwl_eeprom_calib_hdr *hdr;
 275 
 276         hdr = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size,
 277                                             EEPROM_CALIB_ALL);
 278         if (!hdr)
 279                 return -ENODATA;
 280         data->calib_version = hdr->version;
 281         data->calib_voltage = hdr->voltage;
 282 
 283         return 0;
 284 }
 285 
 286 /**
 287  * enum iwl_eeprom_channel_flags - channel flags in EEPROM
 288  * @EEPROM_CHANNEL_VALID: channel is usable for this SKU/geo
 289  * @EEPROM_CHANNEL_IBSS: usable as an IBSS channel
 290  * @EEPROM_CHANNEL_ACTIVE: active scanning allowed
 291  * @EEPROM_CHANNEL_RADAR: radar detection required
 292  * @EEPROM_CHANNEL_WIDE: 20 MHz channel okay (?)
 293  * @EEPROM_CHANNEL_DFS: dynamic freq selection candidate
 294  */
 295 enum iwl_eeprom_channel_flags {
 296         EEPROM_CHANNEL_VALID = BIT(0),
 297         EEPROM_CHANNEL_IBSS = BIT(1),
 298         EEPROM_CHANNEL_ACTIVE = BIT(3),
 299         EEPROM_CHANNEL_RADAR = BIT(4),
 300         EEPROM_CHANNEL_WIDE = BIT(5),
 301         EEPROM_CHANNEL_DFS = BIT(7),
 302 };
 303 
 304 /**
 305  * struct iwl_eeprom_channel - EEPROM channel data
 306  * @flags: %EEPROM_CHANNEL_* flags
 307  * @max_power_avg: max power (in dBm) on this channel, at most 31 dBm
 308  */
 309 struct iwl_eeprom_channel {
 310         u8 flags;
 311         s8 max_power_avg;
 312 } __packed;
 313 
 314 
 315 enum iwl_eeprom_enhanced_txpwr_flags {
 316         IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0),
 317         IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1),
 318         IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2),
 319         IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3),
 320         IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4),
 321         IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5),
 322         IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6),
 323         IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7),
 324 };
 325 
 326 /**
 327  * iwl_eeprom_enhanced_txpwr structure
 328  * @flags: entry flags
 329  * @channel: channel number
 330  * @chain_a_max_pwr: chain a max power in 1/2 dBm
 331  * @chain_b_max_pwr: chain b max power in 1/2 dBm
 332  * @chain_c_max_pwr: chain c max power in 1/2 dBm
 333  * @delta_20_in_40: 20-in-40 deltas (hi/lo)
 334  * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
 335  * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
 336  *
 337  * This structure presents the enhanced regulatory tx power limit layout
 338  * in an EEPROM image.
 339  */
 340 struct iwl_eeprom_enhanced_txpwr {
 341         u8 flags;
 342         u8 channel;
 343         s8 chain_a_max;
 344         s8 chain_b_max;
 345         s8 chain_c_max;
 346         u8 delta_20_in_40;
 347         s8 mimo2_max;
 348         s8 mimo3_max;
 349 } __packed;
 350 
 351 static s8 iwl_get_max_txpwr_half_dbm(const struct iwl_nvm_data *data,
 352                                      struct iwl_eeprom_enhanced_txpwr *txp)
 353 {
 354         s8 result = 0; /* (.5 dBm) */
 355 
 356         /* Take the highest tx power from any valid chains */
 357         if (data->valid_tx_ant & ANT_A && txp->chain_a_max > result)
 358                 result = txp->chain_a_max;
 359 
 360         if (data->valid_tx_ant & ANT_B && txp->chain_b_max > result)
 361                 result = txp->chain_b_max;
 362 
 363         if (data->valid_tx_ant & ANT_C && txp->chain_c_max > result)
 364                 result = txp->chain_c_max;
 365 
 366         if ((data->valid_tx_ant == ANT_AB ||
 367              data->valid_tx_ant == ANT_BC ||
 368              data->valid_tx_ant == ANT_AC) && txp->mimo2_max > result)
 369                 result = txp->mimo2_max;
 370 
 371         if (data->valid_tx_ant == ANT_ABC && txp->mimo3_max > result)
 372                 result = txp->mimo3_max;
 373 
 374         return result;
 375 }
 376 
 377 #define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
 378 #define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
 379 #define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
 380 
 381 #define TXP_CHECK_AND_PRINT(x) \
 382         ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) ? # x " " : "")
 383 
 384 static void
 385 iwl_eeprom_enh_txp_read_element(struct iwl_nvm_data *data,
 386                                 struct iwl_eeprom_enhanced_txpwr *txp,
 387                                 int n_channels, s8 max_txpower_avg)
 388 {
 389         int ch_idx;
 390         enum nl80211_band band;
 391 
 392         band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
 393                 NL80211_BAND_5GHZ : NL80211_BAND_2GHZ;
 394 
 395         for (ch_idx = 0; ch_idx < n_channels; ch_idx++) {
 396                 struct ieee80211_channel *chan = &data->channels[ch_idx];
 397 
 398                 /* update matching channel or from common data only */
 399                 if (txp->channel != 0 && chan->hw_value != txp->channel)
 400                         continue;
 401 
 402                 /* update matching band only */
 403                 if (band != chan->band)
 404                         continue;
 405 
 406                 if (chan->max_power < max_txpower_avg &&
 407                     !(txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ))
 408                         chan->max_power = max_txpower_avg;
 409         }
 410 }
 411 
 412 static void iwl_eeprom_enhanced_txpower(struct device *dev,
 413                                         struct iwl_nvm_data *data,
 414                                         const u8 *eeprom, size_t eeprom_size,
 415                                         int n_channels)
 416 {
 417         struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
 418         int idx, entries;
 419         __le16 *txp_len;
 420         s8 max_txp_avg_halfdbm;
 421 
 422         BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
 423 
 424         /* the length is in 16-bit words, but we want entries */
 425         txp_len = (__le16 *)iwl_eeprom_query_addr(eeprom, eeprom_size,
 426                                                   EEPROM_TXP_SZ_OFFS);
 427         entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
 428 
 429         txp_array = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size,
 430                                                   EEPROM_TXP_OFFS);
 431 
 432         for (idx = 0; idx < entries; idx++) {
 433                 txp = &txp_array[idx];
 434                 /* skip invalid entries */
 435                 if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
 436                         continue;
 437 
 438                 IWL_DEBUG_EEPROM(dev, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
 439                                  (txp->channel && (txp->flags &
 440                                         IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
 441                                         "Common " : (txp->channel) ?
 442                                         "Channel" : "Common",
 443                                  (txp->channel),
 444                                  TXP_CHECK_AND_PRINT(VALID),
 445                                  TXP_CHECK_AND_PRINT(BAND_52G),
 446                                  TXP_CHECK_AND_PRINT(OFDM),
 447                                  TXP_CHECK_AND_PRINT(40MHZ),
 448                                  TXP_CHECK_AND_PRINT(HT_AP),
 449                                  TXP_CHECK_AND_PRINT(RES1),
 450                                  TXP_CHECK_AND_PRINT(RES2),
 451                                  TXP_CHECK_AND_PRINT(COMMON_TYPE),
 452                                  txp->flags);
 453                 IWL_DEBUG_EEPROM(dev,
 454                                  "\t\t chain_A: %d chain_B: %d chain_C: %d\n",
 455                                  txp->chain_a_max, txp->chain_b_max,
 456                                  txp->chain_c_max);
 457                 IWL_DEBUG_EEPROM(dev,
 458                                  "\t\t MIMO2: %d MIMO3: %d High 20_on_40: 0x%02x Low 20_on_40: 0x%02x\n",
 459                                  txp->mimo2_max, txp->mimo3_max,
 460                                  ((txp->delta_20_in_40 & 0xf0) >> 4),
 461                                  (txp->delta_20_in_40 & 0x0f));
 462 
 463                 max_txp_avg_halfdbm = iwl_get_max_txpwr_half_dbm(data, txp);
 464 
 465                 iwl_eeprom_enh_txp_read_element(data, txp, n_channels,
 466                                 DIV_ROUND_UP(max_txp_avg_halfdbm, 2));
 467 
 468                 if (max_txp_avg_halfdbm > data->max_tx_pwr_half_dbm)
 469                         data->max_tx_pwr_half_dbm = max_txp_avg_halfdbm;
 470         }
 471 }
 472 
 473 static void iwl_init_band_reference(const struct iwl_cfg *cfg,
 474                                     const u8 *eeprom, size_t eeprom_size,
 475                                     int eeprom_band, int *eeprom_ch_count,
 476                                     const struct iwl_eeprom_channel **ch_info,
 477                                     const u8 **eeprom_ch_array)
 478 {
 479         u32 offset = cfg->eeprom_params->regulatory_bands[eeprom_band - 1];
 480 
 481         offset |= INDIRECT_ADDRESS | INDIRECT_REGULATORY;
 482 
 483         *ch_info = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, offset);
 484 
 485         switch (eeprom_band) {
 486         case 1:         /* 2.4GHz band */
 487                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1);
 488                 *eeprom_ch_array = iwl_eeprom_band_1;
 489                 break;
 490         case 2:         /* 4.9GHz band */
 491                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2);
 492                 *eeprom_ch_array = iwl_eeprom_band_2;
 493                 break;
 494         case 3:         /* 5.2GHz band */
 495                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3);
 496                 *eeprom_ch_array = iwl_eeprom_band_3;
 497                 break;
 498         case 4:         /* 5.5GHz band */
 499                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4);
 500                 *eeprom_ch_array = iwl_eeprom_band_4;
 501                 break;
 502         case 5:         /* 5.7GHz band */
 503                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5);
 504                 *eeprom_ch_array = iwl_eeprom_band_5;
 505                 break;
 506         case 6:         /* 2.4GHz ht40 channels */
 507                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
 508                 *eeprom_ch_array = iwl_eeprom_band_6;
 509                 break;
 510         case 7:         /* 5 GHz ht40 channels */
 511                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
 512                 *eeprom_ch_array = iwl_eeprom_band_7;
 513                 break;
 514         default:
 515                 *eeprom_ch_count = 0;
 516                 *eeprom_ch_array = NULL;
 517                 WARN_ON(1);
 518         }
 519 }
 520 
 521 #define CHECK_AND_PRINT(x) \
 522         ((eeprom_ch->flags & EEPROM_CHANNEL_##x) ? # x " " : "")
 523 
 524 static void iwl_mod_ht40_chan_info(struct device *dev,
 525                                    struct iwl_nvm_data *data, int n_channels,
 526                                    enum nl80211_band band, u16 channel,
 527                                    const struct iwl_eeprom_channel *eeprom_ch,
 528                                    u8 clear_ht40_extension_channel)
 529 {
 530         struct ieee80211_channel *chan = NULL;
 531         int i;
 532 
 533         for (i = 0; i < n_channels; i++) {
 534                 if (data->channels[i].band != band)
 535                         continue;
 536                 if (data->channels[i].hw_value != channel)
 537                         continue;
 538                 chan = &data->channels[i];
 539                 break;
 540         }
 541 
 542         if (!chan)
 543                 return;
 544 
 545         IWL_DEBUG_EEPROM(dev,
 546                          "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
 547                          channel,
 548                          band == NL80211_BAND_5GHZ ? "5.2" : "2.4",
 549                          CHECK_AND_PRINT(IBSS),
 550                          CHECK_AND_PRINT(ACTIVE),
 551                          CHECK_AND_PRINT(RADAR),
 552                          CHECK_AND_PRINT(WIDE),
 553                          CHECK_AND_PRINT(DFS),
 554                          eeprom_ch->flags,
 555                          eeprom_ch->max_power_avg,
 556                          ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) &&
 557                           !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? ""
 558                                                                       : "not ");
 559 
 560         if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
 561                 chan->flags &= ~clear_ht40_extension_channel;
 562 }
 563 
 564 #define CHECK_AND_PRINT_I(x)    \
 565         ((eeprom_ch_info[ch_idx].flags & EEPROM_CHANNEL_##x) ? # x " " : "")
 566 
 567 static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 568                                 struct iwl_nvm_data *data,
 569                                 const u8 *eeprom, size_t eeprom_size)
 570 {
 571         int band, ch_idx;
 572         const struct iwl_eeprom_channel *eeprom_ch_info;
 573         const u8 *eeprom_ch_array;
 574         int eeprom_ch_count;
 575         int n_channels = 0;
 576 
 577         /*
 578          * Loop through the 5 EEPROM bands and add them to the parse list
 579          */
 580         for (band = 1; band <= 5; band++) {
 581                 struct ieee80211_channel *channel;
 582 
 583                 iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
 584                                         &eeprom_ch_count, &eeprom_ch_info,
 585                                         &eeprom_ch_array);
 586 
 587                 /* Loop through each band adding each of the channels */
 588                 for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
 589                         const struct iwl_eeprom_channel *eeprom_ch;
 590 
 591                         eeprom_ch = &eeprom_ch_info[ch_idx];
 592 
 593                         if (!(eeprom_ch->flags & EEPROM_CHANNEL_VALID)) {
 594                                 IWL_DEBUG_EEPROM(dev,
 595                                                  "Ch. %d Flags %x [%sGHz] - No traffic\n",
 596                                                  eeprom_ch_array[ch_idx],
 597                                                  eeprom_ch_info[ch_idx].flags,
 598                                                  (band != 1) ? "5.2" : "2.4");
 599                                 continue;
 600                         }
 601 
 602                         channel = &data->channels[n_channels];
 603                         n_channels++;
 604 
 605                         channel->hw_value = eeprom_ch_array[ch_idx];
 606                         channel->band = (band == 1) ? NL80211_BAND_2GHZ
 607                                                     : NL80211_BAND_5GHZ;
 608                         channel->center_freq =
 609                                 ieee80211_channel_to_frequency(
 610                                         channel->hw_value, channel->band);
 611 
 612                         /* set no-HT40, will enable as appropriate later */
 613                         channel->flags = IEEE80211_CHAN_NO_HT40;
 614 
 615                         if (!(eeprom_ch->flags & EEPROM_CHANNEL_IBSS))
 616                                 channel->flags |= IEEE80211_CHAN_NO_IR;
 617 
 618                         if (!(eeprom_ch->flags & EEPROM_CHANNEL_ACTIVE))
 619                                 channel->flags |= IEEE80211_CHAN_NO_IR;
 620 
 621                         if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR)
 622                                 channel->flags |= IEEE80211_CHAN_RADAR;
 623 
 624                         /* Initialize regulatory-based run-time data */
 625                         channel->max_power =
 626                                 eeprom_ch_info[ch_idx].max_power_avg;
 627                         IWL_DEBUG_EEPROM(dev,
 628                                          "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
 629                                          channel->hw_value,
 630                                          (band != 1) ? "5.2" : "2.4",
 631                                          CHECK_AND_PRINT_I(VALID),
 632                                          CHECK_AND_PRINT_I(IBSS),
 633                                          CHECK_AND_PRINT_I(ACTIVE),
 634                                          CHECK_AND_PRINT_I(RADAR),
 635                                          CHECK_AND_PRINT_I(WIDE),
 636                                          CHECK_AND_PRINT_I(DFS),
 637                                          eeprom_ch_info[ch_idx].flags,
 638                                          eeprom_ch_info[ch_idx].max_power_avg,
 639                                          ((eeprom_ch_info[ch_idx].flags &
 640                                                         EEPROM_CHANNEL_IBSS) &&
 641                                           !(eeprom_ch_info[ch_idx].flags &
 642                                                         EEPROM_CHANNEL_RADAR))
 643                                                 ? "" : "not ");
 644                 }
 645         }
 646 
 647         if (cfg->eeprom_params->enhanced_txpower) {
 648                 /*
 649                  * for newer device (6000 series and up)
 650                  * EEPROM contain enhanced tx power information
 651                  * driver need to process addition information
 652                  * to determine the max channel tx power limits
 653                  */
 654                 iwl_eeprom_enhanced_txpower(dev, data, eeprom, eeprom_size,
 655                                             n_channels);
 656         } else {
 657                 /* All others use data from channel map */
 658                 int i;
 659 
 660                 data->max_tx_pwr_half_dbm = -128;
 661 
 662                 for (i = 0; i < n_channels; i++)
 663                         data->max_tx_pwr_half_dbm =
 664                                 max_t(s8, data->max_tx_pwr_half_dbm,
 665                                       data->channels[i].max_power * 2);
 666         }
 667 
 668         /* Check if we do have HT40 channels */
 669         if (cfg->eeprom_params->regulatory_bands[5] ==
 670                                 EEPROM_REGULATORY_BAND_NO_HT40 &&
 671             cfg->eeprom_params->regulatory_bands[6] ==
 672                                 EEPROM_REGULATORY_BAND_NO_HT40)
 673                 return n_channels;
 674 
 675         /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
 676         for (band = 6; band <= 7; band++) {
 677                 enum nl80211_band ieeeband;
 678 
 679                 iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
 680                                         &eeprom_ch_count, &eeprom_ch_info,
 681                                         &eeprom_ch_array);
 682 
 683                 /* EEPROM band 6 is 2.4, band 7 is 5 GHz */
 684                 ieeeband = (band == 6) ? NL80211_BAND_2GHZ
 685                                        : NL80211_BAND_5GHZ;
 686 
 687                 /* Loop through each band adding each of the channels */
 688                 for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
 689                         /* Set up driver's info for lower half */
 690                         iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband,
 691                                                eeprom_ch_array[ch_idx],
 692                                                &eeprom_ch_info[ch_idx],
 693                                                IEEE80211_CHAN_NO_HT40PLUS);
 694 
 695                         /* Set up driver's info for upper half */
 696                         iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband,
 697                                                eeprom_ch_array[ch_idx] + 4,
 698                                                &eeprom_ch_info[ch_idx],
 699                                                IEEE80211_CHAN_NO_HT40MINUS);
 700                 }
 701         }
 702 
 703         return n_channels;
 704 }
 705 
 706 int iwl_init_sband_channels(struct iwl_nvm_data *data,
 707                             struct ieee80211_supported_band *sband,
 708                             int n_channels, enum nl80211_band band)
 709 {
 710         struct ieee80211_channel *chan = &data->channels[0];
 711         int n = 0, idx = 0;
 712 
 713         while (idx < n_channels && chan->band != band)
 714                 chan = &data->channels[++idx];
 715 
 716         sband->channels = &data->channels[idx];
 717 
 718         while (idx < n_channels && chan->band == band) {
 719                 chan = &data->channels[++idx];
 720                 n++;
 721         }
 722 
 723         sband->n_channels = n;
 724 
 725         return n;
 726 }
 727 
 728 #define MAX_BIT_RATE_40_MHZ     150 /* Mbps */
 729 #define MAX_BIT_RATE_20_MHZ     72 /* Mbps */
 730 
 731 void iwl_init_ht_hw_capab(struct iwl_trans *trans,
 732                           struct iwl_nvm_data *data,
 733                           struct ieee80211_sta_ht_cap *ht_info,
 734                           enum nl80211_band band,
 735                           u8 tx_chains, u8 rx_chains)
 736 {
 737         const struct iwl_cfg *cfg = trans->cfg;
 738         int max_bit_rate = 0;
 739 
 740         tx_chains = hweight8(tx_chains);
 741         if (cfg->rx_with_siso_diversity)
 742                 rx_chains = 1;
 743         else
 744                 rx_chains = hweight8(rx_chains);
 745 
 746         if (!(data->sku_cap_11n_enable) ||
 747             (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL) ||
 748             !cfg->ht_params) {
 749                 ht_info->ht_supported = false;
 750                 return;
 751         }
 752 
 753         if (data->sku_cap_mimo_disabled)
 754                 rx_chains = 1;
 755 
 756         ht_info->ht_supported = true;
 757         ht_info->cap = IEEE80211_HT_CAP_DSSSCCK40;
 758 
 759         if (cfg->ht_params->stbc) {
 760                 ht_info->cap |= (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
 761 
 762                 if (tx_chains > 1)
 763                         ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
 764         }
 765 
 766         if (cfg->ht_params->ldpc)
 767                 ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING;
 768 
 769         if ((trans->trans_cfg->mq_rx_supported &&
 770              iwlwifi_mod_params.amsdu_size == IWL_AMSDU_DEF) ||
 771              iwlwifi_mod_params.amsdu_size >= IWL_AMSDU_8K)
 772                 ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
 773 
 774         ht_info->ampdu_factor = cfg->max_ht_ampdu_exponent;
 775         ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_4;
 776 
 777         ht_info->mcs.rx_mask[0] = 0xFF;
 778         if (rx_chains >= 2)
 779                 ht_info->mcs.rx_mask[1] = 0xFF;
 780         if (rx_chains >= 3)
 781                 ht_info->mcs.rx_mask[2] = 0xFF;
 782 
 783         if (cfg->ht_params->ht_greenfield_support)
 784                 ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
 785         ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
 786 
 787         max_bit_rate = MAX_BIT_RATE_20_MHZ;
 788 
 789         if (cfg->ht_params->ht40_bands & BIT(band)) {
 790                 ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 791                 ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
 792                 max_bit_rate = MAX_BIT_RATE_40_MHZ;
 793         }
 794 
 795         /* Highest supported Rx data rate */
 796         max_bit_rate *= rx_chains;
 797         WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
 798         ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
 799 
 800         /* Tx MCS capabilities */
 801         ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 802         if (tx_chains != rx_chains) {
 803                 ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
 804                 ht_info->mcs.tx_params |= ((tx_chains - 1) <<
 805                                 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
 806         }
 807 }
 808 
 809 static void iwl_init_sbands(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 810                             struct iwl_nvm_data *data,
 811                             const u8 *eeprom, size_t eeprom_size)
 812 {
 813         struct device *dev = trans->dev;
 814         int n_channels = iwl_init_channel_map(dev, cfg, data,
 815                                               eeprom, eeprom_size);
 816         int n_used = 0;
 817         struct ieee80211_supported_band *sband;
 818 
 819         sband = &data->bands[NL80211_BAND_2GHZ];
 820         sband->band = NL80211_BAND_2GHZ;
 821         sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS];
 822         sband->n_bitrates = N_RATES_24;
 823         n_used += iwl_init_sband_channels(data, sband, n_channels,
 824                                           NL80211_BAND_2GHZ);
 825         iwl_init_ht_hw_capab(trans, data, &sband->ht_cap, NL80211_BAND_2GHZ,
 826                              data->valid_tx_ant, data->valid_rx_ant);
 827 
 828         sband = &data->bands[NL80211_BAND_5GHZ];
 829         sband->band = NL80211_BAND_5GHZ;
 830         sband->bitrates = &iwl_cfg80211_rates[RATES_52_OFFS];
 831         sband->n_bitrates = N_RATES_52;
 832         n_used += iwl_init_sband_channels(data, sband, n_channels,
 833                                           NL80211_BAND_5GHZ);
 834         iwl_init_ht_hw_capab(trans, data, &sband->ht_cap, NL80211_BAND_5GHZ,
 835                              data->valid_tx_ant, data->valid_rx_ant);
 836 
 837         if (n_channels != n_used)
 838                 IWL_ERR_DEV(dev, "EEPROM: used only %d of %d channels\n",
 839                             n_used, n_channels);
 840 }
 841 
 842 /* EEPROM data functions */
 843 
 844 struct iwl_nvm_data *
 845 iwl_parse_eeprom_data(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 846                       const u8 *eeprom, size_t eeprom_size)
 847 {
 848         struct iwl_nvm_data *data;
 849         struct device *dev = trans->dev;
 850         const void *tmp;
 851         u16 radio_cfg, sku;
 852 
 853         if (WARN_ON(!cfg || !cfg->eeprom_params))
 854                 return NULL;
 855 
 856         data = kzalloc(struct_size(data, channels, IWL_NUM_CHANNELS),
 857                        GFP_KERNEL);
 858         if (!data)
 859                 return NULL;
 860 
 861         /* get MAC address(es) */
 862         tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_MAC_ADDRESS);
 863         if (!tmp)
 864                 goto err_free;
 865         memcpy(data->hw_addr, tmp, ETH_ALEN);
 866         data->n_hw_addrs = iwl_eeprom_query16(eeprom, eeprom_size,
 867                                               EEPROM_NUM_MAC_ADDRESS);
 868 
 869         if (iwl_eeprom_read_calib(eeprom, eeprom_size, data))
 870                 goto err_free;
 871 
 872         tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_XTAL);
 873         if (!tmp)
 874                 goto err_free;
 875         memcpy(data->xtal_calib, tmp, sizeof(data->xtal_calib));
 876 
 877         tmp = iwl_eeprom_query_addr(eeprom, eeprom_size,
 878                                     EEPROM_RAW_TEMPERATURE);
 879         if (!tmp)
 880                 goto err_free;
 881         data->raw_temperature = *(__le16 *)tmp;
 882 
 883         tmp = iwl_eeprom_query_addr(eeprom, eeprom_size,
 884                                     EEPROM_KELVIN_TEMPERATURE);
 885         if (!tmp)
 886                 goto err_free;
 887         data->kelvin_temperature = *(__le16 *)tmp;
 888         data->kelvin_voltage = *((__le16 *)tmp + 1);
 889 
 890         radio_cfg = iwl_eeprom_query16(eeprom, eeprom_size,
 891                                              EEPROM_RADIO_CONFIG);
 892         data->radio_cfg_dash = EEPROM_RF_CFG_DASH_MSK(radio_cfg);
 893         data->radio_cfg_pnum = EEPROM_RF_CFG_PNUM_MSK(radio_cfg);
 894         data->radio_cfg_step = EEPROM_RF_CFG_STEP_MSK(radio_cfg);
 895         data->radio_cfg_type = EEPROM_RF_CFG_TYPE_MSK(radio_cfg);
 896         data->valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(radio_cfg);
 897         data->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg);
 898 
 899         sku = iwl_eeprom_query16(eeprom, eeprom_size,
 900                                  EEPROM_SKU_CAP);
 901         data->sku_cap_11n_enable = sku & EEPROM_SKU_CAP_11N_ENABLE;
 902         data->sku_cap_amt_enable = sku & EEPROM_SKU_CAP_AMT_ENABLE;
 903         data->sku_cap_band_24ghz_enable = sku & EEPROM_SKU_CAP_BAND_24GHZ;
 904         data->sku_cap_band_52ghz_enable = sku & EEPROM_SKU_CAP_BAND_52GHZ;
 905         data->sku_cap_ipan_enable = sku & EEPROM_SKU_CAP_IPAN_ENABLE;
 906         if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
 907                 data->sku_cap_11n_enable = false;
 908 
 909         data->nvm_version = iwl_eeprom_query16(eeprom, eeprom_size,
 910                                                EEPROM_VERSION);
 911 
 912         /* check overrides (some devices have wrong EEPROM) */
 913         if (cfg->valid_tx_ant)
 914                 data->valid_tx_ant = cfg->valid_tx_ant;
 915         if (cfg->valid_rx_ant)
 916                 data->valid_rx_ant = cfg->valid_rx_ant;
 917 
 918         if (!data->valid_tx_ant || !data->valid_rx_ant) {
 919                 IWL_ERR_DEV(dev, "invalid antennas (0x%x, 0x%x)\n",
 920                             data->valid_tx_ant, data->valid_rx_ant);
 921                 goto err_free;
 922         }
 923 
 924         iwl_init_sbands(trans, cfg, data, eeprom, eeprom_size);
 925 
 926         return data;
 927  err_free:
 928         kfree(data);
 929         return NULL;
 930 }
 931 IWL_EXPORT_SYMBOL(iwl_parse_eeprom_data);

/* [<][>][^][v][top][bottom][index][help] */