This source file includes following definitions.
- fcpu
- setup_cpuinfo
- show_cpuinfo
- cpuinfo_start
- cpuinfo_next
- cpuinfo_stop
1
2
3
4
5
6
7
8
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/delay.h>
12 #include <linux/seq_file.h>
13 #include <linux/string.h>
14 #include <linux/of.h>
15 #include <asm/cpuinfo.h>
16
17 struct cpuinfo cpuinfo;
18
19 #define err_cpu(x) \
20 pr_err("ERROR: Nios II " x " different for kernel and DTS\n")
21
22 static inline u32 fcpu(struct device_node *cpu, const char *n)
23 {
24 u32 val = 0;
25
26 of_property_read_u32(cpu, n, &val);
27
28 return val;
29 }
30
31 void __init setup_cpuinfo(void)
32 {
33 struct device_node *cpu;
34 const char *str;
35 int len;
36
37 cpu = of_get_cpu_node(0, NULL);
38 if (!cpu)
39 panic("%s: No CPU found in devicetree!\n", __func__);
40
41 if (!of_property_read_bool(cpu, "altr,has-initda"))
42 panic("initda instruction is unimplemented. Please update your "
43 "hardware system to have more than 4-byte line data "
44 "cache\n");
45
46 cpuinfo.cpu_clock_freq = fcpu(cpu, "clock-frequency");
47
48 str = of_get_property(cpu, "altr,implementation", &len);
49 if (str)
50 strlcpy(cpuinfo.cpu_impl, str, sizeof(cpuinfo.cpu_impl));
51 else
52 strcpy(cpuinfo.cpu_impl, "<unknown>");
53
54 cpuinfo.has_div = of_property_read_bool(cpu, "altr,has-div");
55 cpuinfo.has_mul = of_property_read_bool(cpu, "altr,has-mul");
56 cpuinfo.has_mulx = of_property_read_bool(cpu, "altr,has-mulx");
57 cpuinfo.has_bmx = of_property_read_bool(cpu, "altr,has-bmx");
58 cpuinfo.has_cdx = of_property_read_bool(cpu, "altr,has-cdx");
59 cpuinfo.mmu = of_property_read_bool(cpu, "altr,has-mmu");
60
61 if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
62 err_cpu("DIV");
63
64 if (IS_ENABLED(CONFIG_NIOS2_HW_MUL_SUPPORT) && !cpuinfo.has_mul)
65 err_cpu("MUL");
66
67 if (IS_ENABLED(CONFIG_NIOS2_HW_MULX_SUPPORT) && !cpuinfo.has_mulx)
68 err_cpu("MULX");
69
70 if (IS_ENABLED(CONFIG_NIOS2_BMX_SUPPORT) && !cpuinfo.has_bmx)
71 err_cpu("BMX");
72
73 if (IS_ENABLED(CONFIG_NIOS2_CDX_SUPPORT) && !cpuinfo.has_cdx)
74 err_cpu("CDX");
75
76 cpuinfo.tlb_num_ways = fcpu(cpu, "altr,tlb-num-ways");
77 if (!cpuinfo.tlb_num_ways)
78 panic("altr,tlb-num-ways can't be 0. Please check your hardware "
79 "system\n");
80 cpuinfo.icache_line_size = fcpu(cpu, "icache-line-size");
81 cpuinfo.icache_size = fcpu(cpu, "icache-size");
82 if (CONFIG_NIOS2_ICACHE_SIZE != cpuinfo.icache_size)
83 pr_warn("Warning: icache size configuration mismatch "
84 "(0x%x vs 0x%x) of CONFIG_NIOS2_ICACHE_SIZE vs "
85 "device tree icache-size\n",
86 CONFIG_NIOS2_ICACHE_SIZE, cpuinfo.icache_size);
87
88 cpuinfo.dcache_line_size = fcpu(cpu, "dcache-line-size");
89 if (CONFIG_NIOS2_DCACHE_LINE_SIZE != cpuinfo.dcache_line_size)
90 pr_warn("Warning: dcache line size configuration mismatch "
91 "(0x%x vs 0x%x) of CONFIG_NIOS2_DCACHE_LINE_SIZE vs "
92 "device tree dcache-line-size\n",
93 CONFIG_NIOS2_DCACHE_LINE_SIZE, cpuinfo.dcache_line_size);
94 cpuinfo.dcache_size = fcpu(cpu, "dcache-size");
95 if (CONFIG_NIOS2_DCACHE_SIZE != cpuinfo.dcache_size)
96 pr_warn("Warning: dcache size configuration mismatch "
97 "(0x%x vs 0x%x) of CONFIG_NIOS2_DCACHE_SIZE vs "
98 "device tree dcache-size\n",
99 CONFIG_NIOS2_DCACHE_SIZE, cpuinfo.dcache_size);
100
101 cpuinfo.tlb_pid_num_bits = fcpu(cpu, "altr,pid-num-bits");
102 cpuinfo.tlb_num_ways_log2 = ilog2(cpuinfo.tlb_num_ways);
103 cpuinfo.tlb_num_entries = fcpu(cpu, "altr,tlb-num-entries");
104 cpuinfo.tlb_num_lines = cpuinfo.tlb_num_entries / cpuinfo.tlb_num_ways;
105 cpuinfo.tlb_ptr_sz = fcpu(cpu, "altr,tlb-ptr-sz");
106
107 cpuinfo.reset_addr = fcpu(cpu, "altr,reset-addr");
108 cpuinfo.exception_addr = fcpu(cpu, "altr,exception-addr");
109 cpuinfo.fast_tlb_miss_exc_addr = fcpu(cpu, "altr,fast-tlb-miss-addr");
110
111 of_node_put(cpu);
112 }
113
114 #ifdef CONFIG_PROC_FS
115
116
117
118
119 static int show_cpuinfo(struct seq_file *m, void *v)
120 {
121 const u32 clockfreq = cpuinfo.cpu_clock_freq;
122
123 seq_printf(m,
124 "CPU:\t\tNios II/%s\n"
125 "REV:\t\t%i\n"
126 "MMU:\t\t%s\n"
127 "FPU:\t\tnone\n"
128 "Clocking:\t%u.%02u MHz\n"
129 "BogoMips:\t%lu.%02lu\n"
130 "Calibration:\t%lu loops\n",
131 cpuinfo.cpu_impl,
132 CONFIG_NIOS2_ARCH_REVISION,
133 cpuinfo.mmu ? "present" : "none",
134 clockfreq / 1000000, (clockfreq / 100000) % 10,
135 (loops_per_jiffy * HZ) / 500000,
136 ((loops_per_jiffy * HZ) / 5000) % 100,
137 (loops_per_jiffy * HZ));
138
139 seq_printf(m,
140 "HW:\n"
141 " MUL:\t\t%s\n"
142 " MULX:\t\t%s\n"
143 " DIV:\t\t%s\n"
144 " BMX:\t\t%s\n"
145 " CDX:\t\t%s\n",
146 cpuinfo.has_mul ? "yes" : "no",
147 cpuinfo.has_mulx ? "yes" : "no",
148 cpuinfo.has_div ? "yes" : "no",
149 cpuinfo.has_bmx ? "yes" : "no",
150 cpuinfo.has_cdx ? "yes" : "no");
151
152 seq_printf(m,
153 "Icache:\t\t%ukB, line length: %u\n",
154 cpuinfo.icache_size >> 10,
155 cpuinfo.icache_line_size);
156
157 seq_printf(m,
158 "Dcache:\t\t%ukB, line length: %u\n",
159 cpuinfo.dcache_size >> 10,
160 cpuinfo.dcache_line_size);
161
162 seq_printf(m,
163 "TLB:\t\t%u ways, %u entries, %u PID bits\n",
164 cpuinfo.tlb_num_ways,
165 cpuinfo.tlb_num_entries,
166 cpuinfo.tlb_pid_num_bits);
167
168 return 0;
169 }
170
171 static void *cpuinfo_start(struct seq_file *m, loff_t *pos)
172 {
173 unsigned long i = *pos;
174
175 return i < num_possible_cpus() ? (void *) (i + 1) : NULL;
176 }
177
178 static void *cpuinfo_next(struct seq_file *m, void *v, loff_t *pos)
179 {
180 ++*pos;
181 return cpuinfo_start(m, pos);
182 }
183
184 static void cpuinfo_stop(struct seq_file *m, void *v)
185 {
186 }
187
188 const struct seq_operations cpuinfo_op = {
189 .start = cpuinfo_start,
190 .next = cpuinfo_next,
191 .stop = cpuinfo_stop,
192 .show = show_cpuinfo
193 };
194
195 #endif