root/drivers/net/wireless/broadcom/b43/phy_ht.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #ifndef B43_PHY_HT_H_
   3 #define B43_PHY_HT_H_
   4 
   5 #include "phy_common.h"
   6 
   7 
   8 #define B43_PHY_HT_BBCFG                        0x001 /* BB config */
   9 #define  B43_PHY_HT_BBCFG_RSTCCA                0x4000 /* Reset CCA */
  10 #define  B43_PHY_HT_BBCFG_RSTRX                 0x8000 /* Reset RX */
  11 #define B43_PHY_HT_BANDCTL                      0x009 /* Band control */
  12 #define  B43_PHY_HT_BANDCTL_5GHZ                0x0001 /* Use the 5GHz band */
  13 #define B43_PHY_HT_TABLE_ADDR                   0x072 /* Table address */
  14 #define B43_PHY_HT_TABLE_DATALO                 0x073 /* Table data low */
  15 #define B43_PHY_HT_TABLE_DATAHI                 0x074 /* Table data high */
  16 #define B43_PHY_HT_CLASS_CTL                    0x0B0 /* Classifier control */
  17 #define  B43_PHY_HT_CLASS_CTL_CCK_EN            0x0001 /* CCK enable */
  18 #define  B43_PHY_HT_CLASS_CTL_OFDM_EN           0x0002 /* OFDM enable */
  19 #define  B43_PHY_HT_CLASS_CTL_WAITED_EN         0x0004 /* Waited enable */
  20 #define B43_PHY_HT_IQLOCAL_CMDGCTL              0x0C2   /* I/Q LO cal command G control */
  21 #define B43_PHY_HT_SAMP_CMD                     0x0C3   /* Sample command */
  22 #define  B43_PHY_HT_SAMP_CMD_STOP               0x0002  /* Stop */
  23 #define B43_PHY_HT_SAMP_LOOP_CNT                0x0C4   /* Sample loop count */
  24 #define B43_PHY_HT_SAMP_WAIT_CNT                0x0C5   /* Sample wait count */
  25 #define B43_PHY_HT_SAMP_DEP_CNT                 0x0C6   /* Sample depth count */
  26 #define B43_PHY_HT_SAMP_STAT                    0x0C7   /* Sample status */
  27 #define B43_PHY_HT_EST_PWR_C1                   0x118
  28 #define B43_PHY_HT_EST_PWR_C2                   0x119
  29 #define B43_PHY_HT_EST_PWR_C3                   0x11A
  30 #define B43_PHY_HT_TSSIMODE                     0x122   /* TSSI mode */
  31 #define  B43_PHY_HT_TSSIMODE_EN                 0x0001  /* TSSI enable */
  32 #define  B43_PHY_HT_TSSIMODE_PDEN               0x0002  /* Power det enable */
  33 #define B43_PHY_HT_BW1                          0x1CE
  34 #define B43_PHY_HT_BW2                          0x1CF
  35 #define B43_PHY_HT_BW3                          0x1D0
  36 #define B43_PHY_HT_BW4                          0x1D1
  37 #define B43_PHY_HT_BW5                          0x1D2
  38 #define B43_PHY_HT_BW6                          0x1D3
  39 #define B43_PHY_HT_TXPCTL_CMD_C1                0x1E7   /* TX power control command */
  40 #define  B43_PHY_HT_TXPCTL_CMD_C1_INIT          0x007F  /* Init */
  41 #define  B43_PHY_HT_TXPCTL_CMD_C1_COEFF         0x2000  /* Power control coefficients */
  42 #define  B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN      0x4000  /* Hardware TX power control enable */
  43 #define  B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN        0x8000  /* TX power control enable */
  44 #define B43_PHY_HT_TXPCTL_N                     0x1E8   /* TX power control N num */
  45 #define  B43_PHY_HT_TXPCTL_N_TSSID              0x00FF  /* N TSSI delay */
  46 #define  B43_PHY_HT_TXPCTL_N_TSSID_SHIFT        0
  47 #define  B43_PHY_HT_TXPCTL_N_NPTIL2             0x0700  /* N PT integer log2 */
  48 #define  B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT       8
  49 #define B43_PHY_HT_TXPCTL_IDLE_TSSI             0x1E9   /* TX power control idle TSSI */
  50 #define  B43_PHY_HT_TXPCTL_IDLE_TSSI_C1         0x003F
  51 #define  B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT   0
  52 #define  B43_PHY_HT_TXPCTL_IDLE_TSSI_C2         0x3F00
  53 #define  B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT   8
  54 #define  B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF       0x8000  /* Raw TSSI offset bin format */
  55 #define B43_PHY_HT_TXPCTL_TARG_PWR              0x1EA   /* TX power control target power */
  56 #define  B43_PHY_HT_TXPCTL_TARG_PWR_C1          0x00FF  /* Power 0 */
  57 #define  B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT    0
  58 #define  B43_PHY_HT_TXPCTL_TARG_PWR_C2          0xFF00  /* Power 1 */
  59 #define  B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT    8
  60 #define B43_PHY_HT_TX_PCTL_STATUS_C1            0x1ED
  61 #define B43_PHY_HT_TX_PCTL_STATUS_C2            0x1EE
  62 #define B43_PHY_HT_TXPCTL_CMD_C2                0x222
  63 #define  B43_PHY_HT_TXPCTL_CMD_C2_INIT          0x007F
  64 #define B43_PHY_HT_RSSI_C1                      0x219
  65 #define B43_PHY_HT_RSSI_C2                      0x21A
  66 #define B43_PHY_HT_RSSI_C3                      0x21B
  67 
  68 #define B43_PHY_HT_C1_CLIP1THRES                B43_PHY_OFDM(0x00E)
  69 #define B43_PHY_HT_C2_CLIP1THRES                B43_PHY_OFDM(0x04E)
  70 #define B43_PHY_HT_C3_CLIP1THRES                B43_PHY_OFDM(0x08E)
  71 
  72 #define B43_PHY_HT_RF_SEQ_MODE                  B43_PHY_EXTG(0x000)
  73 #define  B43_PHY_HT_RF_SEQ_MODE_CA_OVER         0x0001  /* Core active override */
  74 #define  B43_PHY_HT_RF_SEQ_MODE_TR_OVER         0x0002  /* Trigger override */
  75 #define B43_PHY_HT_RF_SEQ_TRIG                  B43_PHY_EXTG(0x003)
  76 #define  B43_PHY_HT_RF_SEQ_TRIG_RX2TX           0x0001 /* RX2TX */
  77 #define  B43_PHY_HT_RF_SEQ_TRIG_TX2RX           0x0002 /* TX2RX */
  78 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGH            0x0004 /* Update gain H */
  79 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGL            0x0008 /* Update gain L */
  80 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGU            0x0010 /* Update gain U */
  81 #define  B43_PHY_HT_RF_SEQ_TRIG_RST2RX          0x0020 /* Reset to RX */
  82 #define B43_PHY_HT_RF_SEQ_STATUS                B43_PHY_EXTG(0x004)
  83 /* Values for the status are the same as for the trigger */
  84 
  85 #define B43_PHY_HT_RF_CTL_CMD                   0x810
  86 #define  B43_PHY_HT_RF_CTL_CMD_FORCE            0x0001
  87 #define  B43_PHY_HT_RF_CTL_CMD_CHIP0_PU         0x0002
  88 
  89 #define B43_PHY_HT_RF_CTL_INT_C1                B43_PHY_EXTG(0x04c)
  90 #define B43_PHY_HT_RF_CTL_INT_C2                B43_PHY_EXTG(0x06c)
  91 #define B43_PHY_HT_RF_CTL_INT_C3                B43_PHY_EXTG(0x08c)
  92 
  93 #define B43_PHY_HT_AFE_C1_OVER                  B43_PHY_EXTG(0x110)
  94 #define B43_PHY_HT_AFE_C1                       B43_PHY_EXTG(0x111)
  95 #define B43_PHY_HT_AFE_C2_OVER                  B43_PHY_EXTG(0x114)
  96 #define B43_PHY_HT_AFE_C2                       B43_PHY_EXTG(0x115)
  97 #define B43_PHY_HT_AFE_C3_OVER                  B43_PHY_EXTG(0x118)
  98 #define B43_PHY_HT_AFE_C3                       B43_PHY_EXTG(0x119)
  99 
 100 #define B43_PHY_HT_TXPCTL_CMD_C3                B43_PHY_EXTG(0x164)
 101 #define  B43_PHY_HT_TXPCTL_CMD_C3_INIT          0x007F
 102 #define B43_PHY_HT_TXPCTL_IDLE_TSSI2            B43_PHY_EXTG(0x165)     /* TX power control idle TSSI */
 103 #define  B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3        0x003F
 104 #define  B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT  0
 105 #define B43_PHY_HT_TXPCTL_TARG_PWR2             B43_PHY_EXTG(0x166)     /* TX power control target power */
 106 #define  B43_PHY_HT_TXPCTL_TARG_PWR2_C3         0x00FF
 107 #define  B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT   0
 108 #define B43_PHY_HT_TX_PCTL_STATUS_C3            B43_PHY_EXTG(0x169)
 109 
 110 #define B43_PHY_B_BBCFG                         B43_PHY_N_BMODE(0x001)
 111 #define  B43_PHY_B_BBCFG_RSTCCA                 0x4000 /* Reset CCA */
 112 #define  B43_PHY_B_BBCFG_RSTRX                  0x8000 /* Reset RX */
 113 #define B43_PHY_HT_TEST                         B43_PHY_N_BMODE(0x00A)
 114 
 115 
 116 /* Values for PHY registers used on channel switching */
 117 struct b43_phy_ht_channeltab_e_phy {
 118         u16 bw1;
 119         u16 bw2;
 120         u16 bw3;
 121         u16 bw4;
 122         u16 bw5;
 123         u16 bw6;
 124 };
 125 
 126 
 127 struct b43_phy_ht {
 128         u16 rf_ctl_int_save[3];
 129 
 130         bool tx_pwr_ctl;
 131         u8 tx_pwr_idx[3];
 132 
 133         s32 bb_mult_save[3];
 134 
 135         u8 idle_tssi[3];
 136 };
 137 
 138 
 139 struct b43_phy_operations;
 140 extern const struct b43_phy_operations b43_phyops_ht;
 141 
 142 #endif /* B43_PHY_HT_H_ */
/* [<][>][^][v][top][bottom][index][help] */