root/drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c

DEFINITIONS

1. _rtl92ce_init_led
2. rtl92de_sw_led_on
3. rtl92de_sw_led_off
4. rtl92de_init_sw_leds
5. _rtl92ce_sw_led_control
6. rtl92de_led_control

   1 // SPDX-License-Identifier: GPL-2.0
   2 /* Copyright(c) 2009-2012  Realtek Corporation.*/
   3 
   4 #include "../wifi.h"
   5 #include "../pci.h"
   6 #include "reg.h"
   7 #include "led.h"
   8 
   9 static void _rtl92ce_init_led(struct ieee80211_hw *hw,
  10                               struct rtl_led *pled, enum rtl_led_pin ledpin)
  11 {
  12         pled->hw = hw;
  13         pled->ledpin = ledpin;
  14         pled->ledon = false;
  15 }
  16 
  17 void rtl92de_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
  18 {
  19         u8 ledcfg;
  20         struct rtl_priv *rtlpriv = rtl_priv(hw);
  21 
  22         RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
  23                  REG_LEDCFG2, pled->ledpin);
  24 
  25         switch (pled->ledpin) {
  26         case LED_PIN_GPIO0:
  27                 break;
  28         case LED_PIN_LED0:
  29                 ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
  30 
  31                 if ((rtlpriv->efuse.eeprom_did == 0x8176) ||
  32                         (rtlpriv->efuse.eeprom_did == 0x8193))
  33                         /* BIT7 of REG_LEDCFG2 should be set to
  34                          * make sure we could emit the led2. */
  35                         rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0xf0) |
  36                                        BIT(7) | BIT(5) | BIT(6));
  37                 else
  38                         rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0xf0) |
  39                                        BIT(7) | BIT(5));
  40                 break;
  41         case LED_PIN_LED1:
  42                 ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG1);
  43 
  44                 rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
  45                 break;
  46         default:
  47                 pr_err("switch case %#x not processed\n",
  48                        pled->ledpin);
  49                 break;
  50         }
  51         pled->ledon = true;
  52 }
  53 
  54 void rtl92de_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
  55 {
  56         struct rtl_priv *rtlpriv = rtl_priv(hw);
  57         u8 ledcfg;
  58 
  59         RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
  60                  REG_LEDCFG2, pled->ledpin);
  61 
  62         ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
  63 
  64         switch (pled->ledpin) {
  65         case LED_PIN_GPIO0:
  66                 break;
  67         case LED_PIN_LED0:
  68                 ledcfg &= 0xf0;
  69                 if (rtlpriv->ledctl.led_opendrain)
  70                         rtl_write_byte(rtlpriv, REG_LEDCFG2,
  71                                        (ledcfg | BIT(1) | BIT(5) | BIT(6)));
  72                 else
  73                         rtl_write_byte(rtlpriv, REG_LEDCFG2,
  74                                        (ledcfg | BIT(3) | BIT(5) | BIT(6)));
  75                 break;
  76         case LED_PIN_LED1:
  77                 ledcfg &= 0x0f;
  78                 rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
  79                 break;
  80         default:
  81                 pr_err("switch case %#x not processed\n",
  82                        pled->ledpin);
  83                 break;
  84         }
  85         pled->ledon = false;
  86 }
  87 
  88 void rtl92de_init_sw_leds(struct ieee80211_hw *hw)
  89 {
  90         struct rtl_priv *rtlpriv = rtl_priv(hw);
  91 
  92         _rtl92ce_init_led(hw, &rtlpriv->ledctl.sw_led0, LED_PIN_LED0);
  93         _rtl92ce_init_led(hw, &rtlpriv->ledctl.sw_led1, LED_PIN_LED1);
  94 }
  95 
  96 static void _rtl92ce_sw_led_control(struct ieee80211_hw *hw,
  97                                     enum led_ctl_mode ledaction)
  98 {
  99         struct rtl_priv *rtlpriv = rtl_priv(hw);
 100         struct rtl_led *pled0 = &rtlpriv->ledctl.sw_led0;
 101 
 102         switch (ledaction) {
 103         case LED_CTL_POWER_ON:
 104         case LED_CTL_LINK:
 105         case LED_CTL_NO_LINK:
 106                 rtl92de_sw_led_on(hw, pled0);
 107                 break;
 108         case LED_CTL_POWER_OFF:
 109                 rtl92de_sw_led_off(hw, pled0);
 110                 break;
 111         default:
 112                 break;
 113         }
 114 }
 115 
 116 void rtl92de_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction)
 117 {
 118         struct rtl_priv *rtlpriv = rtl_priv(hw);
 119         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 120 
 121         if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
 122             (ledaction == LED_CTL_TX ||
 123              ledaction == LED_CTL_RX ||
 124              ledaction == LED_CTL_SITE_SURVEY ||
 125              ledaction == LED_CTL_LINK ||
 126              ledaction == LED_CTL_NO_LINK ||
 127              ledaction == LED_CTL_START_TO_LINK ||
 128              ledaction == LED_CTL_POWER_ON)) {
 129                 return;
 130         }
 131         RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "ledaction %d,\n", ledaction);
 132 
 133         _rtl92ce_sw_led_control(hw, ledaction);
 134 }