This source file includes following definitions.
- rtl92ee_phy_rf6052_set_bandwidth
- rtl92ee_phy_rf6052_config
- _rtl92ee_phy_rf6052_config_parafile
1
2
3
4 #include "../wifi.h"
5 #include "reg.h"
6 #include "def.h"
7 #include "phy.h"
8 #include "rf.h"
9 #include "dm.h"
10
11 static bool _rtl92ee_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
12
13 void rtl92ee_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
14 {
15 struct rtl_priv *rtlpriv = rtl_priv(hw);
16 struct rtl_phy *rtlphy = &rtlpriv->phy;
17
18 switch (bandwidth) {
19 case HT_CHANNEL_WIDTH_20:
20 rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
21 0xfffff3ff) | BIT(10) | BIT(11));
22 rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
23 rtlphy->rfreg_chnlval[0]);
24 rtl_set_rfreg(hw, RF90_PATH_B, RF_CHNLBW, RFREG_OFFSET_MASK,
25 rtlphy->rfreg_chnlval[0]);
26 break;
27 case HT_CHANNEL_WIDTH_20_40:
28 rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
29 0xfffff3ff) | BIT(10));
30 rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
31 rtlphy->rfreg_chnlval[0]);
32 rtl_set_rfreg(hw, RF90_PATH_B, RF_CHNLBW, RFREG_OFFSET_MASK,
33 rtlphy->rfreg_chnlval[0]);
34 break;
35 default:
36 pr_err("unknown bandwidth: %#X\n", bandwidth);
37 break;
38 }
39 }
40
41 bool rtl92ee_phy_rf6052_config(struct ieee80211_hw *hw)
42 {
43 struct rtl_priv *rtlpriv = rtl_priv(hw);
44 struct rtl_phy *rtlphy = &rtlpriv->phy;
45
46 if (rtlphy->rf_type == RF_1T1R)
47 rtlphy->num_total_rfpath = 1;
48 else
49 rtlphy->num_total_rfpath = 2;
50
51 return _rtl92ee_phy_rf6052_config_parafile(hw);
52 }
53
54 static bool _rtl92ee_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
55 {
56 struct rtl_priv *rtlpriv = rtl_priv(hw);
57 struct rtl_phy *rtlphy = &rtlpriv->phy;
58 u32 u4_regvalue = 0;
59 u8 rfpath;
60 bool rtstatus = true;
61 struct bb_reg_def *pphyreg;
62
63 for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
64 pphyreg = &rtlphy->phyreg_def[rfpath];
65
66 switch (rfpath) {
67 case RF90_PATH_A:
68 case RF90_PATH_C:
69 u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
70 BRFSI_RFENV);
71 break;
72 case RF90_PATH_B:
73 case RF90_PATH_D:
74 u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
75 BRFSI_RFENV << 16);
76 break;
77 }
78
79 rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
80 udelay(1);
81
82 rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
83 udelay(1);
84
85 rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
86 B3WIREADDREAALENGTH, 0x0);
87 udelay(1);
88
89 rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
90 udelay(1);
91
92 switch (rfpath) {
93 case RF90_PATH_A:
94 rtstatus = rtl92ee_phy_config_rf_with_headerfile(hw,
95 (enum radio_path)rfpath);
96 break;
97 case RF90_PATH_B:
98 rtstatus = rtl92ee_phy_config_rf_with_headerfile(hw,
99 (enum radio_path)rfpath);
100 break;
101 case RF90_PATH_C:
102 break;
103 case RF90_PATH_D:
104 break;
105 }
106
107 switch (rfpath) {
108 case RF90_PATH_A:
109 case RF90_PATH_C:
110 rtl_set_bbreg(hw, pphyreg->rfintfs,
111 BRFSI_RFENV, u4_regvalue);
112 break;
113 case RF90_PATH_B:
114 case RF90_PATH_D:
115 rtl_set_bbreg(hw, pphyreg->rfintfs,
116 BRFSI_RFENV << 16, u4_regvalue);
117 break;
118 }
119
120 if (!rtstatus) {
121 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
122 "Radio[%d] Fail!!\n", rfpath);
123 return false;
124 }
125 }
126
127 RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "\n");
128 return rtstatus;
129 }