root/drivers/cpufreq/sh-cpufreq.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. sh_cpufreq_get
  2. __sh_cpufreq_target
  3. sh_cpufreq_target
  4. sh_cpufreq_verify
  5. sh_cpufreq_cpu_init
  6. sh_cpufreq_cpu_exit
  7. sh_cpufreq_cpu_ready
  8. sh_cpufreq_module_init
  9. sh_cpufreq_module_exit

   1 /*
   2  * cpufreq driver for the SuperH processors.
   3  *
   4  * Copyright (C) 2002 - 2012 Paul Mundt
   5  * Copyright (C) 2002 M. R. Brown
   6  *
   7  * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c
   8  *
   9  *   Copyright (C) 2004-2007 Atmel Corporation
  10  *
  11  * This file is subject to the terms and conditions of the GNU General Public
  12  * License.  See the file "COPYING" in the main directory of this archive
  13  * for more details.
  14  */
  15 #define pr_fmt(fmt) "cpufreq: " fmt
  16 
  17 #include <linux/types.h>
  18 #include <linux/cpufreq.h>
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/init.h>
  22 #include <linux/err.h>
  23 #include <linux/cpumask.h>
  24 #include <linux/cpu.h>
  25 #include <linux/smp.h>
  26 #include <linux/sched.h>        /* set_cpus_allowed() */
  27 #include <linux/clk.h>
  28 #include <linux/percpu.h>
  29 #include <linux/sh_clk.h>
  30 
  31 static DEFINE_PER_CPU(struct clk, sh_cpuclk);
  32 
  33 struct cpufreq_target {
  34         struct cpufreq_policy   *policy;
  35         unsigned int            freq;
  36 };
  37 
  38 static unsigned int sh_cpufreq_get(unsigned int cpu)
  39 {
  40         return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
  41 }
  42 
  43 static long __sh_cpufreq_target(void *arg)
  44 {
  45         struct cpufreq_target *target = arg;
  46         struct cpufreq_policy *policy = target->policy;
  47         int cpu = policy->cpu;
  48         struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
  49         struct cpufreq_freqs freqs;
  50         struct device *dev;
  51         long freq;
  52 
  53         if (smp_processor_id() != cpu)
  54                 return -ENODEV;
  55 
  56         dev = get_cpu_device(cpu);
  57 
  58         /* Convert target_freq from kHz to Hz */
  59         freq = clk_round_rate(cpuclk, target->freq * 1000);
  60 
  61         if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
  62                 return -EINVAL;
  63 
  64         dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000);
  65 
  66         freqs.old       = sh_cpufreq_get(cpu);
  67         freqs.new       = (freq + 500) / 1000;
  68         freqs.flags     = 0;
  69 
  70         cpufreq_freq_transition_begin(target->policy, &freqs);
  71         clk_set_rate(cpuclk, freq);
  72         cpufreq_freq_transition_end(target->policy, &freqs, 0);
  73 
  74         dev_dbg(dev, "set frequency %lu Hz\n", freq);
  75         return 0;
  76 }
  77 
  78 /*
  79  * Here we notify other drivers of the proposed change and the final change.
  80  */
  81 static int sh_cpufreq_target(struct cpufreq_policy *policy,
  82                              unsigned int target_freq,
  83                              unsigned int relation)
  84 {
  85         struct cpufreq_target data = { .policy = policy, .freq = target_freq };
  86 
  87         return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data);
  88 }
  89 
  90 static int sh_cpufreq_verify(struct cpufreq_policy_data *policy)
  91 {
  92         struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
  93         struct cpufreq_frequency_table *freq_table;
  94 
  95         freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
  96         if (freq_table)
  97                 return cpufreq_frequency_table_verify(policy, freq_table);
  98 
  99         cpufreq_verify_within_cpu_limits(policy);
 100 
 101         policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000;
 102         policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
 103 
 104         cpufreq_verify_within_cpu_limits(policy);
 105         return 0;
 106 }
 107 
 108 static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
 109 {
 110         unsigned int cpu = policy->cpu;
 111         struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
 112         struct cpufreq_frequency_table *freq_table;
 113         struct device *dev;
 114 
 115         dev = get_cpu_device(cpu);
 116 
 117         cpuclk = clk_get(dev, "cpu_clk");
 118         if (IS_ERR(cpuclk)) {
 119                 dev_err(dev, "couldn't get CPU clk\n");
 120                 return PTR_ERR(cpuclk);
 121         }
 122 
 123         freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
 124         if (freq_table) {
 125                 policy->freq_table = freq_table;
 126         } else {
 127                 dev_notice(dev, "no frequency table found, falling back "
 128                            "to rate rounding.\n");
 129 
 130                 policy->min = policy->cpuinfo.min_freq =
 131                         (clk_round_rate(cpuclk, 1) + 500) / 1000;
 132                 policy->max = policy->cpuinfo.max_freq =
 133                         (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
 134         }
 135 
 136         return 0;
 137 }
 138 
 139 static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 140 {
 141         unsigned int cpu = policy->cpu;
 142         struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
 143 
 144         clk_put(cpuclk);
 145 
 146         return 0;
 147 }
 148 
 149 static void sh_cpufreq_cpu_ready(struct cpufreq_policy *policy)
 150 {
 151         struct device *dev = get_cpu_device(policy->cpu);
 152 
 153         dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
 154                "Maximum %u.%03u MHz.\n",
 155                policy->min / 1000, policy->min % 1000,
 156                policy->max / 1000, policy->max % 1000);
 157 }
 158 
 159 static struct cpufreq_driver sh_cpufreq_driver = {
 160         .name           = "sh",
 161         .flags          = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 162         .get            = sh_cpufreq_get,
 163         .target         = sh_cpufreq_target,
 164         .verify         = sh_cpufreq_verify,
 165         .init           = sh_cpufreq_cpu_init,
 166         .exit           = sh_cpufreq_cpu_exit,
 167         .ready          = sh_cpufreq_cpu_ready,
 168         .attr           = cpufreq_generic_attr,
 169 };
 170 
 171 static int __init sh_cpufreq_module_init(void)
 172 {
 173         pr_notice("SuperH CPU frequency driver.\n");
 174         return cpufreq_register_driver(&sh_cpufreq_driver);
 175 }
 176 
 177 static void __exit sh_cpufreq_module_exit(void)
 178 {
 179         cpufreq_unregister_driver(&sh_cpufreq_driver);
 180 }
 181 
 182 module_init(sh_cpufreq_module_init);
 183 module_exit(sh_cpufreq_module_exit);
 184 
 185 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
 186 MODULE_DESCRIPTION("cpufreq driver for SuperH");
 187 MODULE_LICENSE("GPL");

/* [<][>][^][v][top][bottom][index][help] */