root/drivers/mfd/bcm590xx.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. bcm590xx_i2c_probe

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Broadcom BCM590xx PMU
   4  *
   5  * Copyright 2014 Linaro Limited
   6  * Author: Matt Porter <mporter@linaro.org>
   7  */
   8 
   9 #include <linux/err.h>
  10 #include <linux/i2c.h>
  11 #include <linux/init.h>
  12 #include <linux/mfd/bcm590xx.h>
  13 #include <linux/mfd/core.h>
  14 #include <linux/module.h>
  15 #include <linux/moduleparam.h>
  16 #include <linux/of.h>
  17 #include <linux/of_device.h>
  18 #include <linux/regmap.h>
  19 #include <linux/slab.h>
  20 
  21 static const struct mfd_cell bcm590xx_devs[] = {
  22         {
  23                 .name = "bcm590xx-vregs",
  24         },
  25 };
  26 
  27 static const struct regmap_config bcm590xx_regmap_config_pri = {
  28         .reg_bits       = 8,
  29         .val_bits       = 8,
  30         .max_register   = BCM590XX_MAX_REGISTER_PRI,
  31         .cache_type     = REGCACHE_RBTREE,
  32 };
  33 
  34 static const struct regmap_config bcm590xx_regmap_config_sec = {
  35         .reg_bits       = 8,
  36         .val_bits       = 8,
  37         .max_register   = BCM590XX_MAX_REGISTER_SEC,
  38         .cache_type     = REGCACHE_RBTREE,
  39 };
  40 
  41 static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
  42                               const struct i2c_device_id *id)
  43 {
  44         struct bcm590xx *bcm590xx;
  45         int ret;
  46 
  47         bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL);
  48         if (!bcm590xx)
  49                 return -ENOMEM;
  50 
  51         i2c_set_clientdata(i2c_pri, bcm590xx);
  52         bcm590xx->dev = &i2c_pri->dev;
  53         bcm590xx->i2c_pri = i2c_pri;
  54 
  55         bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
  56                                                  &bcm590xx_regmap_config_pri);
  57         if (IS_ERR(bcm590xx->regmap_pri)) {
  58                 ret = PTR_ERR(bcm590xx->regmap_pri);
  59                 dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret);
  60                 return ret;
  61         }
  62 
  63         /* Secondary I2C slave address is the base address with A(2) asserted */
  64         bcm590xx->i2c_sec = i2c_new_dummy_device(i2c_pri->adapter,
  65                                           i2c_pri->addr | BIT(2));
  66         if (IS_ERR(bcm590xx->i2c_sec)) {
  67                 dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
  68                 return PTR_ERR(bcm590xx->i2c_sec);
  69         }
  70         i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
  71 
  72         bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec,
  73                                                 &bcm590xx_regmap_config_sec);
  74         if (IS_ERR(bcm590xx->regmap_sec)) {
  75                 ret = PTR_ERR(bcm590xx->regmap_sec);
  76                 dev_err(&bcm590xx->i2c_sec->dev,
  77                         "secondary regmap init failed: %d\n", ret);
  78                 goto err;
  79         }
  80 
  81         ret = devm_mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs,
  82                                    ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
  83         if (ret < 0) {
  84                 dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret);
  85                 goto err;
  86         }
  87 
  88         return 0;
  89 
  90 err:
  91         i2c_unregister_device(bcm590xx->i2c_sec);
  92         return ret;
  93 }
  94 
  95 static const struct of_device_id bcm590xx_of_match[] = {
  96         { .compatible = "brcm,bcm59056" },
  97         { }
  98 };
  99 MODULE_DEVICE_TABLE(of, bcm590xx_of_match);
 100 
 101 static const struct i2c_device_id bcm590xx_i2c_id[] = {
 102         { "bcm59056" },
 103         { }
 104 };
 105 MODULE_DEVICE_TABLE(i2c, bcm590xx_i2c_id);
 106 
 107 static struct i2c_driver bcm590xx_i2c_driver = {
 108         .driver = {
 109                    .name = "bcm590xx",
 110                    .of_match_table = of_match_ptr(bcm590xx_of_match),
 111         },
 112         .probe = bcm590xx_i2c_probe,
 113         .id_table = bcm590xx_i2c_id,
 114 };
 115 module_i2c_driver(bcm590xx_i2c_driver);
 116 
 117 MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
 118 MODULE_DESCRIPTION("BCM590xx multi-function driver");
 119 MODULE_LICENSE("GPL v2");

/* [<][>][^][v][top][bottom][index][help] */