root/drivers/scsi/isci/request.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


DEFINITIONS

This source file includes following definitions.
  1. to_ireq
  2. sci_io_request_get_dma_addr
  3. isci_task_is_ncq_recovery

   1 /*
   2  * This file is provided under a dual BSD/GPLv2 license.  When using or
   3  * redistributing this file, you may do so under either license.
   4  *
   5  * GPL LICENSE SUMMARY
   6  *
   7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of version 2 of the GNU General Public License as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16  * General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  21  * The full GNU General Public License is included in this distribution
  22  * in the file called LICENSE.GPL.
  23  *
  24  * BSD LICENSE
  25  *
  26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  27  * All rights reserved.
  28  *
  29  * Redistribution and use in source and binary forms, with or without
  30  * modification, are permitted provided that the following conditions
  31  * are met:
  32  *
  33  *   * Redistributions of source code must retain the above copyright
  34  *     notice, this list of conditions and the following disclaimer.
  35  *   * Redistributions in binary form must reproduce the above copyright
  36  *     notice, this list of conditions and the following disclaimer in
  37  *     the documentation and/or other materials provided with the
  38  *     distribution.
  39  *   * Neither the name of Intel Corporation nor the names of its
  40  *     contributors may be used to endorse or promote products derived
  41  *     from this software without specific prior written permission.
  42  *
  43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  54  */
  55 
  56 #ifndef _ISCI_REQUEST_H_
  57 #define _ISCI_REQUEST_H_
  58 
  59 #include "isci.h"
  60 #include "host.h"
  61 #include "scu_task_context.h"
  62 
  63 /**
  64  * isci_stp_request - extra request infrastructure to handle pio/atapi protocol
  65  * @pio_len - number of bytes requested at PIO setup
  66  * @status - pio setup ending status value to tell us if we need
  67  *           to wait for another fis or if the transfer is complete.  Upon
  68  *           receipt of a d2h fis this will be the status field of that fis.
  69  * @sgl - track pio transfer progress as we iterate through the sgl
  70  */
  71 struct isci_stp_request {
  72         u32 pio_len;
  73         u8 status;
  74 
  75         struct isci_stp_pio_sgl {
  76                 int index;
  77                 u8 set;
  78                 u32 offset;
  79         } sgl;
  80 };
  81 
  82 struct isci_request {
  83         #define IREQ_COMPLETE_IN_TARGET 0
  84         #define IREQ_TERMINATED 1
  85         #define IREQ_TMF 2
  86         #define IREQ_ACTIVE 3
  87         #define IREQ_PENDING_ABORT 4 /* Set == device was not suspended yet */
  88         #define IREQ_TC_ABORT_POSTED 5
  89         #define IREQ_ABORT_PATH_ACTIVE 6
  90         #define IREQ_NO_AUTO_FREE_TAG 7 /* Set when being explicitly managed */
  91         unsigned long flags;
  92         /* XXX kill ttype and ttype_ptr, allocate full sas_task */
  93         union ttype_ptr_union {
  94                 struct sas_task *io_task_ptr;   /* When ttype==io_task  */
  95                 struct isci_tmf *tmf_task_ptr;  /* When ttype==tmf_task */
  96         } ttype_ptr;
  97         struct isci_host *isci_host;
  98         dma_addr_t request_daddr;
  99         dma_addr_t zero_scatter_daddr;
 100         unsigned int num_sg_entries;
 101         /* Note: "io_request_completion" is completed in two different ways
 102          * depending on whether this is a TMF or regular request.
 103          * - TMF requests are completed in the thread that started them;
 104          * - regular requests are completed in the request completion callback
 105          *   function.
 106          * This difference in operation allows the aborter of a TMF request
 107          * to be sure that once the TMF request completes, the I/O that the
 108          * TMF was aborting is guaranteed to have completed.
 109          *
 110          * XXX kill io_request_completion
 111          */
 112         struct completion *io_request_completion;
 113         struct sci_base_state_machine sm;
 114         struct isci_host *owning_controller;
 115         struct isci_remote_device *target_device;
 116         u16 io_tag;
 117         enum sas_protocol protocol;
 118         u32 scu_status; /* hardware result */
 119         u32 sci_status; /* upper layer disposition */
 120         u32 post_context;
 121         struct scu_task_context *tc;
 122         /* could be larger with sg chaining */
 123         #define SCU_SGL_SIZE ((SCI_MAX_SCATTER_GATHER_ELEMENTS + 1) / 2)
 124         struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32)));
 125         /* This field is a pointer to the stored rx frame data.  It is used in
 126          * STP internal requests and SMP response frames.  If this field is
 127          * non-NULL the saved frame must be released on IO request completion.
 128          */
 129         u32 saved_rx_frame_index;
 130 
 131         union {
 132                 struct {
 133                         union {
 134                                 struct ssp_cmd_iu cmd;
 135                                 struct ssp_task_iu tmf;
 136                         };
 137                         union {
 138                                 struct ssp_response_iu rsp;
 139                                 u8 rsp_buf[SSP_RESP_IU_MAX_SIZE];
 140                         };
 141                 } ssp;
 142                 struct {
 143                         struct isci_stp_request req;
 144                         struct host_to_dev_fis cmd;
 145                         struct dev_to_host_fis rsp;
 146                 } stp;
 147         };
 148 };
 149 
 150 static inline struct isci_request *to_ireq(struct isci_stp_request *stp_req)
 151 {
 152         struct isci_request *ireq;
 153 
 154         ireq = container_of(stp_req, typeof(*ireq), stp.req);
 155         return ireq;
 156 }
 157 
 158 /**
 159  * enum sci_base_request_states - request state machine states
 160  *
 161  * @SCI_REQ_INIT: Simply the initial state for the base request state machine.
 162  *
 163  * @SCI_REQ_CONSTRUCTED: This state indicates that the request has been
 164  * constructed.  This state is entered from the INITIAL state.
 165  *
 166  * @SCI_REQ_STARTED: This state indicates that the request has been started.
 167  * This state is entered from the CONSTRUCTED state.
 168  *
 169  * @SCI_REQ_STP_UDMA_WAIT_TC_COMP:
 170  * @SCI_REQ_STP_UDMA_WAIT_D2H:
 171  * @SCI_REQ_STP_NON_DATA_WAIT_H2D:
 172  * @SCI_REQ_STP_NON_DATA_WAIT_D2H:
 173  *
 174  * @SCI_REQ_STP_PIO_WAIT_H2D: While in this state the IO request object is
 175  * waiting for the TC completion notification for the H2D Register FIS
 176  *
 177  * @SCI_REQ_STP_PIO_WAIT_FRAME: While in this state the IO request object is
 178  * waiting for either a PIO Setup FIS or a D2H register FIS.  The type of frame
 179  * received is based on the result of the prior frame and line conditions.
 180  *
 181  * @SCI_REQ_STP_PIO_DATA_IN: While in this state the IO request object is
 182  * waiting for a DATA frame from the device.
 183  *
 184  * @SCI_REQ_STP_PIO_DATA_OUT: While in this state the IO request object is
 185  * waiting to transmit the next data frame to the device.
 186  *
 187  * @SCI_REQ_ATAPI_WAIT_H2D: While in this state the IO request object is
 188  * waiting for the TC completion notification for the H2D Register FIS
 189  *
 190  * @SCI_REQ_ATAPI_WAIT_PIO_SETUP: While in this state the IO request object is
 191  * waiting for either a PIO Setup.
 192  *
 193  * @SCI_REQ_ATAPI_WAIT_D2H: The non-data IO transit to this state in this state
 194  * after receiving TC completion. While in this state IO request object is
 195  * waiting for D2H status frame as UF.
 196  *
 197  * @SCI_REQ_ATAPI_WAIT_TC_COMP: When transmitting raw frames hardware reports
 198  * task context completion after every frame submission, so in the
 199  * non-accelerated case we need to expect the completion for the "cdb" frame.
 200  *
 201  * @SCI_REQ_TASK_WAIT_TC_COMP: The AWAIT_TC_COMPLETION sub-state indicates that
 202  * the started raw task management request is waiting for the transmission of
 203  * the initial frame (i.e. command, task, etc.).
 204  *
 205  * @SCI_REQ_TASK_WAIT_TC_RESP: This sub-state indicates that the started task
 206  * management request is waiting for the reception of an unsolicited frame
 207  * (i.e.  response IU).
 208  *
 209  * @SCI_REQ_SMP_WAIT_RESP: This sub-state indicates that the started task
 210  * management request is waiting for the reception of an unsolicited frame
 211  * (i.e.  response IU).
 212  *
 213  * @SCI_REQ_SMP_WAIT_TC_COMP: The AWAIT_TC_COMPLETION sub-state indicates that
 214  * the started SMP request is waiting for the transmission of the initial frame
 215  * (i.e.  command, task, etc.).
 216  *
 217  * @SCI_REQ_COMPLETED: This state indicates that the request has completed.
 218  * This state is entered from the STARTED state. This state is entered from the
 219  * ABORTING state.
 220  *
 221  * @SCI_REQ_ABORTING: This state indicates that the request is in the process
 222  * of being terminated/aborted.  This state is entered from the CONSTRUCTED
 223  * state.  This state is entered from the STARTED state.
 224  *
 225  * @SCI_REQ_FINAL: Simply the final state for the base request state machine.
 226  */
 227 #define REQUEST_STATES {\
 228         C(REQ_INIT),\
 229         C(REQ_CONSTRUCTED),\
 230         C(REQ_STARTED),\
 231         C(REQ_STP_UDMA_WAIT_TC_COMP),\
 232         C(REQ_STP_UDMA_WAIT_D2H),\
 233         C(REQ_STP_NON_DATA_WAIT_H2D),\
 234         C(REQ_STP_NON_DATA_WAIT_D2H),\
 235         C(REQ_STP_PIO_WAIT_H2D),\
 236         C(REQ_STP_PIO_WAIT_FRAME),\
 237         C(REQ_STP_PIO_DATA_IN),\
 238         C(REQ_STP_PIO_DATA_OUT),\
 239         C(REQ_ATAPI_WAIT_H2D),\
 240         C(REQ_ATAPI_WAIT_PIO_SETUP),\
 241         C(REQ_ATAPI_WAIT_D2H),\
 242         C(REQ_ATAPI_WAIT_TC_COMP),\
 243         C(REQ_TASK_WAIT_TC_COMP),\
 244         C(REQ_TASK_WAIT_TC_RESP),\
 245         C(REQ_SMP_WAIT_RESP),\
 246         C(REQ_SMP_WAIT_TC_COMP),\
 247         C(REQ_COMPLETED),\
 248         C(REQ_ABORTING),\
 249         C(REQ_FINAL),\
 250         }
 251 #undef C
 252 #define C(a) SCI_##a
 253 enum sci_base_request_states REQUEST_STATES;
 254 #undef C
 255 const char *req_state_name(enum sci_base_request_states state);
 256 
 257 enum sci_status sci_request_start(struct isci_request *ireq);
 258 enum sci_status sci_io_request_terminate(struct isci_request *ireq);
 259 enum sci_status
 260 sci_io_request_event_handler(struct isci_request *ireq,
 261                                   u32 event_code);
 262 enum sci_status
 263 sci_io_request_frame_handler(struct isci_request *ireq,
 264                                   u32 frame_index);
 265 enum sci_status
 266 sci_task_request_terminate(struct isci_request *ireq);
 267 extern enum sci_status
 268 sci_request_complete(struct isci_request *ireq);
 269 extern enum sci_status
 270 sci_io_request_tc_completion(struct isci_request *ireq, u32 code);
 271 
 272 /* XXX open code in caller */
 273 static inline dma_addr_t
 274 sci_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr)
 275 {
 276 
 277         char *requested_addr = (char *)virt_addr;
 278         char *base_addr = (char *)ireq;
 279 
 280         BUG_ON(requested_addr < base_addr);
 281         BUG_ON((requested_addr - base_addr) >= sizeof(*ireq));
 282 
 283         return ireq->request_daddr + (requested_addr - base_addr);
 284 }
 285 
 286 #define isci_request_access_task(req) ((req)->ttype_ptr.io_task_ptr)
 287 
 288 #define isci_request_access_tmf(req) ((req)->ttype_ptr.tmf_task_ptr)
 289 
 290 struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost,
 291                                                struct isci_tmf *isci_tmf,
 292                                                u16 tag);
 293 int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev,
 294                          struct sas_task *task, u16 tag);
 295 enum sci_status
 296 sci_task_request_construct(struct isci_host *ihost,
 297                             struct isci_remote_device *idev,
 298                             u16 io_tag,
 299                             struct isci_request *ireq);
 300 enum sci_status sci_task_request_construct_ssp(struct isci_request *ireq);
 301 void sci_smp_request_copy_response(struct isci_request *ireq);
 302 
 303 static inline int isci_task_is_ncq_recovery(struct sas_task *task)
 304 {
 305         return (sas_protocol_ata(task->task_proto) &&
 306                 task->ata_task.fis.command == ATA_CMD_READ_LOG_EXT &&
 307                 task->ata_task.fis.lbal == ATA_LOG_SATA_NCQ);
 308 
 309 }
 310 #endif /* !defined(_ISCI_REQUEST_H_) */

/* [<][>][^][v][top][bottom][index][help] */