drivers/scsi/aic7xxx/aicasm/aicasm.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
STAILQ_HEAD
usage
back_patch
output_code
dump_scope
emit_patch
output_listing
check_patch
stop
seq_alloc
cs_alloc
scope_alloc
process_scope
   1 /*
   2  * Aic7xxx SCSI host adapter firmware assembler
   3  *
   4  * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs.
   5  * Copyright (c) 2001, 2002 Adaptec Inc.
   6  * All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions, and the following disclaimer,
  13  *    without modification.
  14  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  15  *    substantially similar to the "NO WARRANTY" disclaimer below
  16  *    ("Disclaimer") and any redistribution must be conditioned upon
  17  *    including a substantially similar Disclaimer requirement for further
  18  *    binary redistribution.
  19  * 3. Neither the names of the above-listed copyright holders nor the names
  20  *    of any contributors may be used to endorse or promote products derived
  21  *    from this software without specific prior written permission.
  22  *
  23  * Alternatively, this software may be distributed under the terms of the
  24  * GNU General Public License ("GPL") version 2 as published by the Free
  25  * Software Foundation.
  26  *
  27  * NO WARRANTY
  28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  30  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  31  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  32  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  33  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  34  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  36  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  37  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  38  * POSSIBILITY OF SUCH DAMAGES.
  39  *
  40  * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $
  41  *
  42  * $FreeBSD$
  43  */
  44 #include <sys/types.h>
  45 #include <sys/mman.h>
  46 
  47 #include <ctype.h>
  48 #include <inttypes.h>
  49 #include <regex.h>
  50 #include <stdio.h>
  51 #include <stdlib.h>
  52 #include <string.h>
  53 #include <sysexits.h>
  54 #include <unistd.h>
  55 
  56 #if linux
  57 #include <endian.h>
  58 #else
  59 #include <machine/endian.h>
  60 #endif
  61 
  62 #include "aicasm.h"
  63 #include "aicasm_symbol.h"
  64 #include "aicasm_insformat.h"
  65 
  66 typedef struct patch {
  67         STAILQ_ENTRY(patch) links;
  68         int             patch_func;
  69         u_int           begin;
  70         u_int           skip_instr;
  71         u_int           skip_patch;
  72 } patch_t;
  73 
  74 STAILQ_HEAD(patch_list, patch) patches;
  75 
  76 static void usage(void);
  77 static void back_patch(void);
  78 static void output_code(void);
  79 static void output_listing(char *ifilename);
  80 static void dump_scope(scope_t *scope);
  81 static void emit_patch(scope_t *scope, int patch);
  82 static int check_patch(patch_t **start_patch, int start_instr,
  83                        int *skip_addr, int *func_vals);
  84 
  85 struct path_list search_path;
  86 int includes_search_curdir;
  87 char *appname;
  88 char *stock_include_file;
  89 FILE *ofile;
  90 char *ofilename;
  91 char *regfilename;
  92 FILE *regfile;
  93 char *listfilename;
  94 FILE *listfile;
  95 char *regdiagfilename;
  96 FILE *regdiagfile;
  97 int   src_mode;
  98 int   dst_mode;
  99 
 100 static STAILQ_HEAD(,instruction) seq_program;
 101 struct cs_tailq cs_tailq;
 102 struct scope_list scope_stack;
 103 symlist_t patch_functions;
 104 
 105 #if DEBUG
 106 extern int yy_flex_debug;
 107 extern int mm_flex_debug;
 108 extern int yydebug;
 109 extern int mmdebug;
 110 #endif
 111 extern FILE *yyin;
 112 extern int yyparse(void);
 113 
 114 int main(int argc, char *argv[]);
 115 
 116 int
 117 main(int argc, char *argv[])
 118 {
 119         extern char *optarg;
 120         extern int optind;
 121         int  ch;
 122         int  retval;
 123         char *inputfilename;
 124         scope_t *sentinal;
 125 
 126         STAILQ_INIT(&patches);
 127         SLIST_INIT(&search_path);
 128         STAILQ_INIT(&seq_program);
 129         TAILQ_INIT(&cs_tailq);
 130         SLIST_INIT(&scope_stack);
 131 
 132         /* Set Sentinal scope node */
 133         sentinal = scope_alloc();
 134         sentinal->type = SCOPE_ROOT;
 135         
 136         includes_search_curdir = 1;
 137         appname = *argv;
 138         regfile = NULL;
 139         listfile = NULL;
 140 #if DEBUG
 141         yy_flex_debug = 0;
 142         mm_flex_debug = 0;
 143         yydebug = 0;
 144         mmdebug = 0;
 145 #endif
 146         while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:")) != -1) {
 147                 switch(ch) {
 148                 case 'd':
 149 #if DEBUG
 150                         if (strcmp(optarg, "s") == 0) {
 151                                 yy_flex_debug = 1;
 152                                 mm_flex_debug = 1;
 153                         } else if (strcmp(optarg, "p") == 0) {
 154                                 yydebug = 1;
 155                                 mmdebug = 1;
 156                         } else {
 157                                 fprintf(stderr, "%s: -d Requires either an "
 158                                         "'s' or 'p' argument\n", appname);
 159                                 usage();
 160                         }
 161 #else
 162                         stop("-d: Assembler not built with debugging "
 163                              "information", EX_SOFTWARE);
 164 #endif
 165                         break;
 166                 case 'i':
 167                         stock_include_file = optarg;
 168                         break;
 169                 case 'l':
 170                         /* Create a program listing */
 171                         if ((listfile = fopen(optarg, "w")) == NULL) {
 172                                 perror(optarg);
 173                                 stop(NULL, EX_CANTCREAT);
 174                         }
 175                         listfilename = optarg;
 176                         break;
 177                 case 'n':
 178                         /* Don't complain about the -nostdinc directrive */
 179                         if (strcmp(optarg, "ostdinc")) {
 180                                 fprintf(stderr, "%s: Unknown option -%c%s\n",
 181                                         appname, ch, optarg);
 182                                 usage();
 183                                 /* NOTREACHED */
 184                         }
 185                         break;
 186                 case 'o':
 187                         if ((ofile = fopen(optarg, "w")) == NULL) {
 188                                 perror(optarg);
 189                                 stop(NULL, EX_CANTCREAT);
 190                         }
 191                         ofilename = optarg;
 192                         break;
 193                 case 'p':
 194                         /* Create Register Diagnostic "printing" Functions */
 195                         if ((regdiagfile = fopen(optarg, "w")) == NULL) {
 196                                 perror(optarg);
 197                                 stop(NULL, EX_CANTCREAT);
 198                         }
 199                         regdiagfilename = optarg;
 200                         break;
 201                 case 'r':
 202                         if ((regfile = fopen(optarg, "w")) == NULL) {
 203                                 perror(optarg);
 204                                 stop(NULL, EX_CANTCREAT);
 205                         }
 206                         regfilename = optarg;
 207                         break;
 208                 case 'I':
 209                 {
 210                         path_entry_t include_dir;
 211 
 212                         if (strcmp(optarg, "-") == 0) {
 213                                 if (includes_search_curdir == 0) {
 214                                         fprintf(stderr, "%s: Warning - '-I-' "
 215                                                         "specified multiple "
 216                                                         "times\n", appname);
 217                                 }
 218                                 includes_search_curdir = 0;
 219                                 for (include_dir = SLIST_FIRST(&search_path);
 220                                      include_dir != NULL;
 221                                      include_dir = SLIST_NEXT(include_dir,
 222                                                               links))
 223                                         /*
 224                                          * All entries before a '-I-' only
 225                                          * apply to includes specified with
 226                                          * quotes instead of "<>".
 227                                          */
 228                                         include_dir->quoted_includes_only = 1;
 229                         } else {
 230                                 include_dir =
 231                                     (path_entry_t)malloc(sizeof(*include_dir));
 232                                 if (include_dir == NULL) {
 233                                         perror(optarg);
 234                                         stop(NULL, EX_OSERR);
 235                                 }
 236                                 include_dir->directory = strdup(optarg);
 237                                 if (include_dir->directory == NULL) {
 238                                         perror(optarg);
 239                                         stop(NULL, EX_OSERR);
 240                                 }
 241                                 include_dir->quoted_includes_only = 0;
 242                                 SLIST_INSERT_HEAD(&search_path, include_dir,
 243                                                   links);
 244                         }
 245                         break;
 246                 }
 247                 case '?':
 248                 default:
 249                         usage();
 250                         /* NOTREACHED */
 251                 }
 252         }
 253         argc -= optind;
 254         argv += optind;
 255 
 256         if (argc != 1) {
 257                 fprintf(stderr, "%s: No input file specified\n", appname);
 258                 usage();
 259                 /* NOTREACHED */
 260         }
 261 
 262         if (regdiagfile != NULL
 263          && (regfile == NULL || stock_include_file == NULL)) {
 264                 fprintf(stderr,
 265                         "%s: The -p option requires the -r and -i options.\n",
 266                         appname);
 267                 usage();
 268                 /* NOTREACHED */
 269         }
 270         symtable_open();
 271         inputfilename = *argv;
 272         include_file(*argv, SOURCE_FILE);
 273         retval = yyparse();
 274         if (retval == 0) {
 275                 if (SLIST_FIRST(&scope_stack) == NULL
 276                  || SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) {
 277                         stop("Unterminated conditional expression", EX_DATAERR);
 278                         /* NOTREACHED */
 279                 }
 280 
 281                 /* Process outmost scope */
 282                 process_scope(SLIST_FIRST(&scope_stack));
 283                 /*
 284                  * Decend the tree of scopes and insert/emit
 285                  * patches as appropriate.  We perform a depth first
 286                  * tranversal, recursively handling each scope.
 287                  */
 288                 /* start at the root scope */
 289                 dump_scope(SLIST_FIRST(&scope_stack));
 290 
 291                 /* Patch up forward jump addresses */
 292                 back_patch();
 293 
 294                 if (ofile != NULL)
 295                         output_code();
 296                 if (regfile != NULL)
 297                         symtable_dump(regfile, regdiagfile);
 298                 if (listfile != NULL)
 299                         output_listing(inputfilename);
 300         }
 301 
 302         stop(NULL, 0);
 303         /* NOTREACHED */
 304         return (0);
 305 }
 306 
 307 static void
 308 usage()
 309 {
 310 
 311         (void)fprintf(stderr,
 312 "usage: %-16s [-nostdinc] [-I-] [-I directory] [-o output_file]\n"
 313 "       [-r register_output_file [-p register_diag_file -i includefile]]\n"
 314 "       [-l program_list_file]\n"
 315 "       input_file\n", appname);
 316         exit(EX_USAGE);
 317 }
 318 
 319 static void
 320 back_patch()
 321 {
 322         struct instruction *cur_instr;
 323 
 324         for (cur_instr = STAILQ_FIRST(&seq_program);
 325              cur_instr != NULL;
 326              cur_instr = STAILQ_NEXT(cur_instr, links)) {
 327                 if (cur_instr->patch_label != NULL) {
 328                         struct ins_format3 *f3_instr;
 329                         u_int address;
 330 
 331                         if (cur_instr->patch_label->type != LABEL) {
 332                                 char buf[255];
 333 
 334                                 snprintf(buf, sizeof(buf),
 335                                          "Undefined label %s",
 336                                          cur_instr->patch_label->name);
 337                                 stop(buf, EX_DATAERR);
 338                                 /* NOTREACHED */
 339                         }
 340                         f3_instr = &cur_instr->format.format3;
 341                         address = f3_instr->address;
 342                         address += cur_instr->patch_label->info.linfo->address;
 343                         f3_instr->address = address;
 344                 }
 345         }
 346 }
 347 
 348 static void
 349 output_code()
 350 {
 351         struct instruction *cur_instr;
 352         patch_t *cur_patch;
 353         critical_section_t *cs;
 354         symbol_node_t *cur_node;
 355         int instrcount;
 356 
 357         instrcount = 0;
 358         fprintf(ofile,
 359 "/*\n"
 360 " * DO NOT EDIT - This file is automatically generated\n"
 361 " *              from the following source files:\n"
 362 " *\n"
 363 "%s */\n", versions);
 364 
 365         fprintf(ofile, "static const uint8_t seqprog[] = {\n");
 366         for (cur_instr = STAILQ_FIRST(&seq_program);
 367              cur_instr != NULL;
 368              cur_instr = STAILQ_NEXT(cur_instr, links)) {
 369 
 370                 fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x",
 371                         cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n",
 372 #ifdef __LITTLE_ENDIAN
 373                         cur_instr->format.bytes[0],
 374                         cur_instr->format.bytes[1],
 375                         cur_instr->format.bytes[2],
 376                         cur_instr->format.bytes[3]);
 377 #else
 378                         cur_instr->format.bytes[3],
 379                         cur_instr->format.bytes[2],
 380                         cur_instr->format.bytes[1],
 381                         cur_instr->format.bytes[0]);
 382 #endif
 383                 instrcount++;
 384         }
 385         fprintf(ofile, "\n};\n\n");
 386 
 387         if (patch_arg_list == NULL)
 388                 stop("Patch argument list not defined",
 389                      EX_DATAERR);
 390 
 391         /*
 392          *  Output patch information.  Patch functions first.
 393          */
 394         fprintf(ofile,
 395 "typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list);
 396 
 397         for (cur_node = SLIST_FIRST(&patch_functions);
 398              cur_node != NULL;
 399              cur_node = SLIST_NEXT(cur_node,links)) {
 400                 fprintf(ofile,
 401 "static %spatch_func_t %spatch%d_func;\n"
 402 "\n"
 403 "static int\n"
 404 "%spatch%d_func(%s)\n"
 405 "{\n"
 406 "       return (%s);\n"
 407 "}\n\n",
 408                         prefix,
 409                         prefix,
 410                         cur_node->symbol->info.condinfo->func_num,
 411                         prefix,
 412                         cur_node->symbol->info.condinfo->func_num,
 413                         patch_arg_list,
 414                         cur_node->symbol->name);
 415         }
 416 
 417         fprintf(ofile,
 418 "static const struct patch {\n"
 419 "       %spatch_func_t          *patch_func;\n"
 420 "       uint32_t                 begin          :10,\n"
 421 "                                skip_instr     :10,\n"
 422 "                                skip_patch     :12;\n"
 423 "} patches[] = {\n", prefix);
 424 
 425         for (cur_patch = STAILQ_FIRST(&patches);
 426              cur_patch != NULL;
 427              cur_patch = STAILQ_NEXT(cur_patch,links)) {
 428                 fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }",
 429                         cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n",
 430                         prefix,
 431                         cur_patch->patch_func, cur_patch->begin,
 432                         cur_patch->skip_instr, cur_patch->skip_patch);
 433         }
 434 
 435         fprintf(ofile, "\n};\n\n");
 436 
 437         fprintf(ofile,
 438 "static const struct cs {\n"
 439 "       uint16_t        begin;\n"
 440 "       uint16_t        end;\n"
 441 "} critical_sections[] = {\n");
 442 
 443         for (cs = TAILQ_FIRST(&cs_tailq);
 444              cs != NULL;
 445              cs = TAILQ_NEXT(cs, links)) {
 446                 fprintf(ofile, "%s\t{ %d, %d }",
 447                         cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n",
 448                         cs->begin_addr, cs->end_addr);
 449         }
 450 
 451         fprintf(ofile, "\n};\n\n");
 452 
 453         fprintf(ofile,
 454         "#define NUM_CRITICAL_SECTIONS ARRAY_SIZE(critical_sections)\n");
 455 
 456         fprintf(stderr, "%s: %d instructions used\n", appname, instrcount);
 457 }
 458 
 459 static void
 460 dump_scope(scope_t *scope)
 461 {
 462         scope_t *cur_scope;
 463 
 464         /*
 465          * Emit the first patch for this scope
 466          */
 467         emit_patch(scope, 0);
 468 
 469         /*
 470          * Dump each scope within this one.
 471          */
 472         cur_scope = TAILQ_FIRST(&scope->inner_scope);
 473 
 474         while (cur_scope != NULL) {
 475 
 476                 dump_scope(cur_scope);
 477 
 478                 cur_scope = TAILQ_NEXT(cur_scope, scope_links);
 479         }
 480 
 481         /*
 482          * Emit the second, closing, patch for this scope
 483          */
 484         emit_patch(scope, 1);
 485 }
 486 
 487 void
 488 emit_patch(scope_t *scope, int patch)
 489 {
 490         patch_info_t *pinfo;
 491         patch_t *new_patch;
 492 
 493         pinfo = &scope->patches[patch];
 494 
 495         if (pinfo->skip_instr == 0)
 496                 /* No-Op patch */
 497                 return;
 498 
 499         new_patch = (patch_t *)malloc(sizeof(*new_patch));
 500 
 501         if (new_patch == NULL)
 502                 stop("Could not malloc patch structure", EX_OSERR);
 503 
 504         memset(new_patch, 0, sizeof(*new_patch));
 505 
 506         if (patch == 0) {
 507                 new_patch->patch_func = scope->func_num;
 508                 new_patch->begin = scope->begin_addr;
 509         } else {
 510                 new_patch->patch_func = 0;
 511                 new_patch->begin = scope->end_addr;
 512         }
 513         new_patch->skip_instr = pinfo->skip_instr;
 514         new_patch->skip_patch = pinfo->skip_patch;
 515         STAILQ_INSERT_TAIL(&patches, new_patch, links);
 516 }
 517 
 518 void
 519 output_listing(char *ifilename)
 520 {
 521         char buf[1024];
 522         FILE *ifile;
 523         struct instruction *cur_instr;
 524         patch_t *cur_patch;
 525         symbol_node_t *cur_func;
 526         int *func_values;
 527         int instrcount;
 528         int instrptr;
 529         int line;
 530         int func_count;
 531         int skip_addr;
 532 
 533         instrcount = 0;
 534         instrptr = 0;
 535         line = 1;
 536         skip_addr = 0;
 537         if ((ifile = fopen(ifilename, "r")) == NULL) {
 538                 perror(ifilename);
 539                 stop(NULL, EX_DATAERR);
 540         }
 541 
 542         /*
 543          * Determine which options to apply to this listing.
 544          */
 545         for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions);
 546             cur_func != NULL;
 547             cur_func = SLIST_NEXT(cur_func, links))
 548                 func_count++;
 549 
 550         func_values = NULL;
 551         if (func_count != 0) {
 552                 func_values = (int *)malloc(func_count * sizeof(int));
 553 
 554                 if (func_values == NULL)
 555                         stop("Could not malloc", EX_OSERR);
 556                 
 557                 func_values[0] = 0; /* FALSE func */
 558                 func_count--;
 559 
 560                 /*
 561                  * Ask the user to fill in the return values for
 562                  * the rest of the functions.
 563                  */
 564                 
 565                 
 566                 for (cur_func = SLIST_FIRST(&patch_functions);
 567                      cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL;
 568                      cur_func = SLIST_NEXT(cur_func, links), func_count--) {
 569                         int input;
 570                         
 571                         fprintf(stdout, "\n(%s)\n", cur_func->symbol->name);
 572                         fprintf(stdout,
 573                                 "Enter the return value for "
 574                                 "this expression[T/F]:");
 575 
 576                         while (1) {
 577 
 578                                 input = getchar();
 579                                 input = toupper(input);
 580 
 581                                 if (input == 'T') {
 582                                         func_values[func_count] = 1;
 583                                         break;
 584                                 } else if (input == 'F') {
 585                                         func_values[func_count] = 0;
 586                                         break;
 587                                 }
 588                         }
 589                         if (isatty(fileno(stdin)) == 0)
 590                                 putchar(input);
 591                 }
 592                 fprintf(stdout, "\nThanks!\n");
 593         }
 594 
 595         /* Now output the listing */
 596         cur_patch = STAILQ_FIRST(&patches);
 597         for (cur_instr = STAILQ_FIRST(&seq_program);
 598              cur_instr != NULL;
 599              cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) {
 600 
 601                 if (check_patch(&cur_patch, instrcount,
 602                                 &skip_addr, func_values) == 0) {
 603                         /* Don't count this instruction as it is in a patch
 604                          * that was removed.
 605                          */
 606                         continue;
 607                 }
 608 
 609                 while (line < cur_instr->srcline) {
 610                         fgets(buf, sizeof(buf), ifile);
 611                                 fprintf(listfile, "             \t%s", buf);
 612                                 line++;
 613                 }
 614                 fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr,
 615 #ifdef __LITTLE_ENDIAN
 616                         cur_instr->format.bytes[0],
 617                         cur_instr->format.bytes[1],
 618                         cur_instr->format.bytes[2],
 619                         cur_instr->format.bytes[3]);
 620 #else
 621                         cur_instr->format.bytes[3],
 622                         cur_instr->format.bytes[2],
 623                         cur_instr->format.bytes[1],
 624                         cur_instr->format.bytes[0]);
 625 #endif
 626                 /*
 627                  * Macro expansions can cause several instructions
 628                  * to be output for a single source line.  Only
 629                  * advance the line once in these cases.
 630                  */
 631                 if (line == cur_instr->srcline) {
 632                         fgets(buf, sizeof(buf), ifile);
 633                         fprintf(listfile, "\t%s", buf);
 634                         line++;
 635                 } else {
 636                         fprintf(listfile, "\n");
 637                 }
 638                 instrptr++;
 639         }
 640         /* Dump the remainder of the file */
 641         while(fgets(buf, sizeof(buf), ifile) != NULL)
 642                 fprintf(listfile, "             %s", buf);
 643 
 644         fclose(ifile);
 645 }
 646 
 647 static int
 648 check_patch(patch_t **start_patch, int start_instr,
 649             int *skip_addr, int *func_vals)
 650 {
 651         patch_t *cur_patch;
 652 
 653         cur_patch = *start_patch;
 654 
 655         while (cur_patch != NULL && start_instr == cur_patch->begin) {
 656                 if (func_vals[cur_patch->patch_func] == 0) {
 657                         int skip;
 658 
 659                         /* Start rejecting code */
 660                         *skip_addr = start_instr + cur_patch->skip_instr;
 661                         for (skip = cur_patch->skip_patch;
 662                              skip > 0 && cur_patch != NULL;
 663                              skip--)
 664                                 cur_patch = STAILQ_NEXT(cur_patch, links);
 665                 } else {
 666                         /* Accepted this patch.  Advance to the next
 667                          * one and wait for our intruction pointer to
 668                          * hit this point.
 669                          */
 670                         cur_patch = STAILQ_NEXT(cur_patch, links);
 671                 }
 672         }
 673 
 674         *start_patch = cur_patch;
 675         if (start_instr < *skip_addr)
 676                 /* Still skipping */
 677                 return (0);
 678 
 679         return (1);
 680 }
 681 
 682 /*
 683  * Print out error information if appropriate, and clean up before
 684  * terminating the program.
 685  */
 686 void
 687 stop(const char *string, int err_code)
 688 {
 689         if (string != NULL) {
 690                 fprintf(stderr, "%s: ", appname);
 691                 if (yyfilename != NULL) {
 692                         fprintf(stderr, "Stopped at file %s, line %d - ",
 693                                 yyfilename, yylineno);
 694                 }
 695                 fprintf(stderr, "%s\n", string);
 696         }
 697 
 698         if (ofile != NULL) {
 699                 fclose(ofile);
 700                 if (err_code != 0) {
 701                         fprintf(stderr, "%s: Removing %s due to error\n",
 702                                 appname, ofilename);
 703                         unlink(ofilename);
 704                 }
 705         }
 706 
 707         if (regfile != NULL) {
 708                 fclose(regfile);
 709                 if (err_code != 0) {
 710                         fprintf(stderr, "%s: Removing %s due to error\n",
 711                                 appname, regfilename);
 712                         unlink(regfilename);
 713                 }
 714         }
 715 
 716         if (listfile != NULL) {
 717                 fclose(listfile);
 718                 if (err_code != 0) {
 719                         fprintf(stderr, "%s: Removing %s due to error\n",
 720                                 appname, listfilename);
 721                         unlink(listfilename);
 722                 }
 723         }
 724 
 725         symlist_free(&patch_functions);
 726         symtable_close();
 727 
 728         exit(err_code);
 729 }
 730 
 731 struct instruction *
 732 seq_alloc()
 733 {
 734         struct instruction *new_instr;
 735 
 736         new_instr = (struct instruction *)malloc(sizeof(struct instruction));
 737         if (new_instr == NULL)
 738                 stop("Unable to malloc instruction object", EX_SOFTWARE);
 739         memset(new_instr, 0, sizeof(*new_instr));
 740         STAILQ_INSERT_TAIL(&seq_program, new_instr, links);
 741         new_instr->srcline = yylineno;
 742         return new_instr;
 743 }
 744 
 745 critical_section_t *
 746 cs_alloc()
 747 {
 748         critical_section_t *new_cs;
 749 
 750         new_cs= (critical_section_t *)malloc(sizeof(critical_section_t));
 751         if (new_cs == NULL)
 752                 stop("Unable to malloc critical_section object", EX_SOFTWARE);
 753         memset(new_cs, 0, sizeof(*new_cs));
 754         
 755         TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links);
 756         return new_cs;
 757 }
 758 
 759 scope_t *
 760 scope_alloc()
 761 {
 762         scope_t *new_scope;
 763 
 764         new_scope = (scope_t *)malloc(sizeof(scope_t));
 765         if (new_scope == NULL)
 766                 stop("Unable to malloc scope object", EX_SOFTWARE);
 767         memset(new_scope, 0, sizeof(*new_scope));
 768         TAILQ_INIT(&new_scope->inner_scope);
 769         
 770         if (SLIST_FIRST(&scope_stack) != NULL) {
 771                 TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope,
 772                                   new_scope, scope_links);
 773         }
 774         /* This patch is now the current scope */
 775         SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links);
 776         return new_scope;
 777 }
 778 
 779 void
 780 process_scope(scope_t *scope)
 781 {
 782         /*
 783          * We are "leaving" this scope.  We should now have
 784          * enough information to process the lists of scopes
 785          * we encapsulate.
 786          */
 787         scope_t *cur_scope;
 788         u_int skip_patch_count;
 789         u_int skip_instr_count;
 790 
 791         cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq);
 792         skip_patch_count = 0;
 793         skip_instr_count = 0;
 794         while (cur_scope != NULL) {
 795                 u_int patch0_patch_skip;
 796 
 797                 patch0_patch_skip = 0;
 798                 switch (cur_scope->type) {
 799                 case SCOPE_IF:
 800                 case SCOPE_ELSE_IF:
 801                         if (skip_instr_count != 0) {
 802                                 /* Create a tail patch */
 803                                 patch0_patch_skip++;
 804                                 cur_scope->patches[1].skip_patch =
 805                                     skip_patch_count + 1;
 806                                 cur_scope->patches[1].skip_instr =
 807                                     skip_instr_count;
 808                         }
 809 
 810                         /* Count Head patch */
 811                         patch0_patch_skip++;
 812 
 813                         /* Count any patches contained in our inner scope */
 814                         patch0_patch_skip += cur_scope->inner_scope_patches;
 815 
 816                         cur_scope->patches[0].skip_patch = patch0_patch_skip;
 817                         cur_scope->patches[0].skip_instr =
 818                             cur_scope->end_addr - cur_scope->begin_addr;
 819 
 820                         skip_instr_count += cur_scope->patches[0].skip_instr;
 821 
 822                         skip_patch_count += patch0_patch_skip;
 823                         if (cur_scope->type == SCOPE_IF) {
 824                                 scope->inner_scope_patches += skip_patch_count;
 825                                 skip_patch_count = 0;
 826                                 skip_instr_count = 0;
 827                         }
 828                         break;
 829                 case SCOPE_ELSE:
 830                         /* Count any patches contained in our innter scope */
 831                         skip_patch_count += cur_scope->inner_scope_patches;
 832 
 833                         skip_instr_count += cur_scope->end_addr
 834                                           - cur_scope->begin_addr;
 835                         break;
 836                 case SCOPE_ROOT:
 837                         stop("Unexpected scope type encountered", EX_SOFTWARE);
 838                         /* NOTREACHED */
 839                 }
 840 
 841                 cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links);
 842         }
 843 }
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/scsi/aic7xxx/aicasm/aicasm.c

DEFINITIONS
